# Session — unifi-wifi pfSense SSH gateway-control verbs (ROADMAP §E)

## User
- **User:** Howard Enos (howard)
- **Machine:** Howard-Home
- **Role:** tech

## Session Summary

Picked up the unifi-wifi skill build-out, specifically the open WIP in ROADMAP §E — the pfSense
gateway "compatibility layer". The skill already had a working read-only SSH backend
(`pfsense-ssh.sh`: `audit`/`dhcp`/`run`/`shell`) and a superseded REST backend
(`pfsense-backend.sh`) that held the full control-verb contract. Per Mike's 2026-06-16 decision
(SSH, not the REST API package), the remaining work was to implement gated CONTROL verbs on the
SSH backend mirroring the `gw-control` contract, then rewire `gw-audit.sh`/`gw-control.sh` dispatch
to the SSH backend.

Before writing code, ran read-only discovery against the live Cascades pfSense (Plus 25.07-RELEASE,
reachable at 192.168.0.1 over the Cascades site VPN) to pin the exact config schema rather than
guess. Discovery established: `pfSsh.php` does NOT eval piped ad-hoc code (only its built-in
`playback` scripts), so the reliable primitive is `php` with a `require_once("config.inc")`
bootstrap, which loads `$config` + `write_config()` + `filter_configure()`. Filter rules are keyed
on `tracker` (the `id` field is empty on 25.07); enabled/disabled is the PRESENCE of a `disabled`
key. `easyrule` supports `block/unblock/showblock <interface> <source>` and auto-manages its alias
+ WAN rule. Cascades has 20 filter rules and 0 NAT port-forwards.

Built a new versioned PHP helper `scripts/pfsense-gwc.php` (argv-driven, no operator data
interpolated into PHP source) for list/toggle/set/delete against `$config`, with a config backup +
`write_config()` + `filter_configure()` on every write. Extended `pfsense-ssh.sh` with 12 verbs
(`pf-list`, `fw-list`, `showblock`, `pf-disable/enable/delete`, `pf-set-ports`, `pf-set-src`,
`fw-disable/enable`, `block-ips`, `unblock`) — DRY-RUN by default, `--apply` to commit. The helper
ships to the box via `base64 | openssl base64 -A -d` and runs with argv. Rewired dispatch in both
`gw-control.sh` and `gw-audit.sh` to prefer the SSH backend (keyed on
`clients/<slug>/pfsense-firewall`), running the dispatch BEFORE UOS site resolution so a
pfSense-only client slug works; the REST backend is now a dormant fallback.

Validated live on Cascades: reads (`fw-list` all 20 rules with correct schema, `pf-list`,
`showblock`), tracker- and descr-based matching, the full `block-ips`/`unblock` cycle on a TEST-NET
documentation IP (192.0.2.123), and the `pfsense-gwc.php` write path via a `fw-disable`/`fw-enable`
round-trip on an inert rule (config backup + reload confirmed, rule returned to original state).
Updated ROADMAP §E status to done, recorded the pfSense PHP gotchas, and updated SKILL.md's verb
reference + dispatch description.

## Key Decisions

- **`php` + `config.inc` bootstrap, not config.xml text parsing.** Robust against version drift and
  gives pfSense's own `write_config()`/`filter_configure()` for safe commit + reload. Chosen after
  confirming `pfSsh.php` only runs its built-in `playback` scripts, not piped code.
- **Versioned PHP helper file (`pfsense-gwc.php`) instead of a bash heredoc.** Keeps the control
  logic readable/lintable; shipped to the box per-call via base64 over the existing SSH session.
- **argv-driven helper.** All operator data passed as positional args, never interpolated into PHP
  source — no shell/PHP injection surface.
- **Match filter rules by `tracker` or exact `descr`, not `id`.** The `id` field is empty on pf25.07;
  `tracker` is the stable unique key.
- **Dispatch runs before UOS site resolution.** A pfSense-only site is keyed by client slug (not a
  UOS site name), so resolving the UOS site first would hard-exit before dispatch could fire.
- **SSH backend preferred, REST kept dormant.** Honors Mike's 2026-06-16 decision; REST
  (`pfsense-backend.sh` + `clients/<slug>/pfsense-api`) stays in-tree only as a fallback.
- **`block-ips` via `easyrule`, toggles via the PHP path.** easyrule is the cleanest, canonical
  pfSense block mechanism (auto alias + rule); rule toggles need direct `$config` edits.

## Problems Encountered

- **pfSsh.php piped code did nothing.** Expected `echo '...; exec' | pfSsh.php` to eval; it only
  prints its banner + `playback` command list. Switched to `php` with a temp-file script.
- **php_rc=255 with no error output.** pfSense runs `display_errors=Off`, so fatals are silent.
  Fixed by running php with `2>&1` AND `ini_set("display_errors","1")` in the helper.
- **`Cannot redeclare backup_config()` fatal.** pfSense's `config.lib.inc` already defines it (and
  many generic names). Prefixed all helper functions with `gwc_`. Also dropped the extra
  `require_once` of util/functions/filter — `config.inc` already pulls them; re-requiring caused
  the redeclare fatal.
- **Empty output on first `fw-list` runs.** Root-caused via step markers in the remote script (the
  three issues above), not by guessing.
- **`No such file or directory` on a verb test.** Working dir had persisted from an earlier `cd`
  into the scripts dir; relative script path broke. Re-ran with `cd /c/claudetools` + path.

## Configuration Changes

Created:
- `.claude/skills/unifi-wifi/scripts/pfsense-gwc.php` — argv-driven pfSense config control helper.

Modified:
- `.claude/skills/unifi-wifi/scripts/pfsense-ssh.sh` — added 12 control verbs, `--apply`/`--if`
  parsing, `sq()` shell-quote + `run_gwc()` ship-and-run helper, fixed `run` to use preserved args.
- `.claude/skills/unifi-wifi/scripts/gw-control.sh` — SSH-first dispatch (pfsense-firewall cred),
  moved above UOS site resolution; REST kept as fallback.
- `.claude/skills/unifi-wifi/scripts/gw-audit.sh` — same SSH-first dispatch for `audit`.
- `.claude/skills/unifi-wifi/references/ROADMAP.md` — §E status → done; verb list; pfSense PHP
  gotchas added to cross-platform notes.
- `.claude/skills/unifi-wifi/SKILL.md` — pfSense section rewritten (read/write verb tables,
  dispatch); gw-control usage block corrected (routes to pfsense-ssh.sh, match by tracker/descr).

## Credentials & Secrets

No new credentials created or discovered. Used existing vault entries (read-only):
- `clients/cascades-tucson/pfsense-firewall` — host 192.168.0.1, user `admin`, password stored.
  Used by `pfsense-ssh.sh` (system OpenSSH via askpass).
- `clients/cascades-tucson/pfsense-openvpn-howard` — the Cascades site VPN profile (referenced for
  reachability; not directly used by the scripts).

## Infrastructure & Servers

- **Cascades pfSense** — 192.168.0.1 (LAN), pfSense Plus **25.07-RELEASE**, admin SSH drops straight
  to a shell. Reachable over the Cascades site VPN (16ms). 20 filter rules, 0 NAT port-forwards.
- PHP include_path on the box: `.:/etc/inc:/usr/local/pfSense/include:...` — `require_once("config.inc")`
  resolves from anywhere.
- Test residue left on Cascades: an inert `'Blocked via EasyRule'` WAN block rule (tracker
  1782065739) + empty `EasyRuleBlockHostsWAN` alias, created by the `block-ips` validation. Blocks
  nothing (empty alias); returned to enabled state. Pending operator decision to remove or keep.

## Commands & Outputs

```
# Discovery (read-only) — schema + tooling
pfsense-ssh.sh cascades-tucson run 'cat /etc/version'                     # 25.07-RELEASE
# php bootstrap works; pfSsh.php only runs playback scripts (not piped code)
php /tmp/q.php  ->  NAT_RULES=0  FILTER_RULES=20
easyrule  ->  block|unblock|showblock <if> <src>; pass <if> <proto> <src> <dst> [port]

# New read verbs
pfsense-ssh.sh cascades-tucson fw-list      # 20 rules, keyed on tracker
pfsense-ssh.sh cascades-tucson pf-list      # (no NAT port-forwards configured)
pfsense-ssh.sh cascades-tucson showblock    # No entries are blocked on interface: wan

# Live write validations
pfsense-ssh.sh cascades-tucson block-ips 192.0.2.123 --apply   # Block added successfully
pfsense-ssh.sh cascades-tucson showblock                       # 192.0.2.123/32
pfsense-ssh.sh cascades-tucson unblock 192.0.2.123 --apply     # Entry unblocked successfully
pfsense-ssh.sh cascades-tucson fw-disable 1782065739 --apply   # backup + write_config + filter reload -> [off]
pfsense-ssh.sh cascades-tucson fw-enable  1782065739 --apply   # -> [on] (restored)

# Dispatch validation
gw-control.sh cascades-tucson fw-list       # -> dispatches to pfsense-ssh.sh
gw-control.sh cascades-tucson fw-disable 1772841904   # dry-run via dispatch

# Syntax check
bash -n pfsense-ssh.sh gw-control.sh gw-audit.sh   # all [OK]
```

Key gotcha encoded in scripts: pfSense `display_errors=Off` (run php with `2>&1` + `ini_set`),
`backup_config()` collision (prefix `gwc_*`), `config.inc`-only bootstrap (no re-require).

## Pending / Incomplete Tasks

- **`pf-*` (NAT port-forward) verbs are built but NOT live-verified.** Cascades has 0 port-forwards,
  so they were coded against the documented pfSense NAT schema (`destination.port`, `target`,
  `local-port`, `associated-rule-id`). Need a pfSense box with an actual port-forward + a vaulted
  `clients/<slug>/pfsense-firewall` cred to confirm field names before trusting `--apply`. Marked
  live-verify-pending in ROADMAP §E.
- **Cascades easyrule test residue** — decide whether to remove the inert
  `'Blocked via EasyRule'` rule (tracker 1782065739) + empty `EasyRuleBlockHostsWAN` alias.
- **Optional `pf-add`/create verbs** — not needed today (we only close/scope existing exposure);
  noted in ROADMAP as future.
- Other §B/§C/§D ROADMAP items remain (per-client AP creds, gateway-hosted VPN server, read-only
  vault cred) — untouched this session.

## Reference Information

- Session-log path: `session-logs/2026-06/2026-06-21-howard-unifi-pfsense-control-verbs.md`
- Skill: `.claude/skills/unifi-wifi/` — ROADMAP §E is the design/verb-map + pfSense PHP gotchas.
- Verb contract source (UniFi side): `scripts/gw-control.sh` header.
- Prior sync commits this session: `5ede4fe` (earlier auto-sync), `96a5dd6` (the pfSense build).
- pfSense filter-rule schema: keyed on `tracker`; `type` = pass/block/reject; `disabled` key
  presence = off; `source`/`destination` are objects (`{any:""}` or `{network,port}`).

---

## Update: 16:14 PT — finished §E build-out, conformance, prep, coord triage

Continued the same session well past the initial pfSense-control-verbs build. Net: the entire
unifi-wifi pfSense gateway compatibility layer (ROADMAP §E) is now complete, validated, documented;
the whole skill is brought into skill-module conformance; and the remaining blocked items are prepped.

### Session Summary (continuation)
- **`--port` support** added to `pfsense-ssh.sh` (precedence: `--port` flag > vault `port`/`credentials.port`
  field > default 22). Caught + fixed a regression where the vault returns the literal string `"null"` for a
  missing field (so `:-` defaulting failed → `ssh -p null`); normalized `""`/`null`. Also fixed `run` to use
  `POS` not the removed `RAWARGS` so flags don't leak into ad-hoc commands.
- **Site→gateway map**: `sites.sh` now prints a live gateway map (each UOS site classified UniFi-gw vs
  pfSense/third-party + vaulted pfSense creds with host:port). 12 UniFi-gw / 36 no-UniFi-gw sites; 1 cred (Cascades).
- **Auto-select**: new `references/site-gateways.tsv` (site_id→cred map, seeded Cascades) + new
  `scripts/gateway-map.sh` (`lookup`/`list`/`validate`/`suggest`). `gw-audit`/`gw-control` now auto-route a
  site to its pfSense cred with NO `--pfsense` — validated `gw-control Cascades fw-list` + `gw-audit Cascades`.
- **Mike's cred-path answer = option A** (coord msg 0bca380f): 1st arg with `/` = full vault path, else a
  client slug; fail loud `[ERROR] no cred at vault:<path>` on a bad path. Implemented in `pfsense-ssh.sh` +
  `gw-audit`/`gw-control` dispatch; validated path mode, slug mode, fail-loud. Unblocks the ACG office box
  (`--pfsense infrastructure/pfsense-firewall`). Closed the coord loop (todo `e0ba933f` done, reply `fc96afba`).
- **Skill error-logging conformance** (skill-creator mandatory rule — the whole skill had none): added
  `logerr` (canonical `log-skill-error.sh`) to the live scripts (pfsense-ssh/gw-control/gw-audit) + SKILL.md
  guideline, then delegated the remaining ~20 scripts to a sub-agent (verified: all `bash -n` clean, exit
  codes preserved, conservative functional-only logging, no false positives). New `gateway-map.sh` self-logs.
- **pf-* NAT verbs live-verified** on Cascades via a temp source-locked (TEST-NET) disabled port-forward:
  create→pf-list→set-ports→set-src→enable→disable→delete; `pf-delete` removed the associated filter rule;
  box back to baseline (nat=0, filter=21). Verb mechanics + documented NAT schema confirmed.
- **§D least-privilege** prepped: `gw-audit` now prefers a read-only controller cred
  (`infrastructure/uos-server-network-api`) and auto-uses it once vaulted (falls back to RW with a hint).
- **Prep docs**: new `references/onboarding.md` (copy-paste §B AP-cred + pfSense + §D RO-cred procedures);
  ROADMAP §C now carries a build-ready WireGuard VPN-server design.
- **Coord inbox triage**: 41 messages, all already read; surfaced 4 possibly-open (BUG-016/017, log-analysis
  interview, LHM, billing), rest resolved/FYI.
- **BUG-016/017 verification** (user asked to take them): both ALREADY FIXED in guru-rmm (commit 30da053,
  Mike 2026-06-01) — `StateDirectory=gururmm` in the systemd template (016) + `OnceLock CACHED_ID` in
  `device_id.rs` (017). Verified against working tree `ed8cad3` (== origin/main). Nothing to take.

### Key Decisions (continuation)
- Auto-select keyed on the stable 24-hex UOS `site_id`, not a fuzzy name (lookup also accepts a name as a
  fallback). Map generated/consulted live; the TSV is the only persisted state.
- Error-logging delegated to a sub-agent for the ~20-script sweep (high-volume, mechanical-with-judgment,
  independent) — but the 3 live entry-point scripts done by hand first as the template, and the agent's output
  verified (syntax + exit-code preservation + no false-positive logging) rather than trusted.
- pf-* verification used a hand-built forward source-locked to TEST-NET (inert even if enabled) on the
  designated test box (Cascades) — reversible, no exposure; noted that a GUI-created forward is a future
  belt-and-suspenders schema check.

### Problems Encountered (continuation)
- `ssh -p null` regression from the vault returning `"null"` for a missing `port` field → normalized.
- Repeated `cd` into the guru-rmm submodule left the working dir there; a later `sync.sh` relative-path call
  failed (exit 127) → re-ran from `/c/claudetools`. (Recurring Bash-cwd-persistence friction.)

### Configuration Changes (continuation)
Created: `scripts/gateway-map.sh`, `references/site-gateways.tsv`, `references/onboarding.md`.
Modified: `scripts/pfsense-ssh.sh`, `scripts/gw-control.sh`, `scripts/gw-audit.sh`, `scripts/sites.sh`,
`scripts/pfsense-gwc.php` (gwc_ prefixes earlier), the other ~20 `scripts/*.sh` (logerr), `SKILL.md`,
`references/ROADMAP.md`; wiki `systems/pfsense.md`, `systems/uos-server.md`, `index.md`.

### Pending / Incomplete Tasks (continuation)
- **§B / §D**: blocked only on external inputs (per-client AP creds + site reach; the read-only controller
  account). Procedures ready in `references/onboarding.md`; `gw-audit` already RO-cred-ready.
- **§C**: VPN-server stand-up — build-ready design in ROADMAP §C; not externally blocked (Cascades reachable).
- **BUG-018** (guru-rmm, P2, Open): `DELETE /api/agents/:id` resets connection (HTTP 000), FK-cascade slow;
  `server/src/api/agents.rs:127-150` → `server/src/db/agents.rs:186-190`. Offered to take; awaiting go.
- Optional pf-* GUI-created-forward schema spot-check; optional `pf-add` verbs (not needed today).

### Reference Information (continuation)
- Coord: Mike's answer `0bca380f`; reply `fc96afba`; todo done `e0ba933f`.
- guru-rmm: BUG-016/017 fixed in commit `30da053`; BUG-018 open (FEATURE_ROADMAP.md ~line 411); repo HEAD `ed8cad3`.
- Sync commits this continuation: `5ede4fe`→`be9d6c3` (multiple auto-syncs across the build).