Mike Swanson
aa9bd26df8
Reconstructed from local transcripts via the new recovery engine. These were substantive sessions never saved with /save. All banner-marked RECOVERED-UNVERIFIED. Notable recoveries: Peaceful Spirit RADIUS/VPN buildout (full command trail), RMM agent check-in comparison, Kristen Datto Workplace sync, Intune+Apple. guru-rmm/guru-connect-scoped logs routed to root session-logs (submodule convention). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
185 KiB
185 KiB
[RECOVERED] Troubleshoot RMM installation script 404 error
[RECOVERED -- UNVERIFIED] Auto-reconstructed from transcript 5b023e80-29e9-4b73-adc1-a36bc6c46dfd (2026-05-28T21:00:12.837Z .. 2026-05-29T08:44:55.592Z) on 2026-06-01. Prose sections are Ollama-drafted from the transcript and may be imprecise; the Commands/Config/Reference sections are extracted verbatim. Review and correct, then remove this banner.
User
- User: Mike Swanson (mike)
- Machine: GURU-5070
- Role: admin
Session Summary
The session began with an attempt to install a system via a PowerShell command that resulted in a 404 error. The assistant investigated the GuruRMM server status and confirmed the server was operational. The 404 error was traced to the install endpoint, leading to a search for the install route definition in the server code. The assistant checked the server source code on Gitea and confirmed the route was registered. Further investigation revealed the site code was valid but the server binary was outdated. The assistant checked the server logs and confirmed the server was running on port 3001. The issue was identified as Nginx Proxy Manager blocking the /install/ path, serving static files instead of proxying to the server. The assistant verified the static directory and confirmed it was serving static files. The assistant then proceeded to extract MediCat to a USB stick, verifying the extraction and preparing the USB for use. The assistant also addressed a separate message about a server rebuild needed for a discovery fix.
Key Decisions
- Investigate the GuruRMM server status and install endpoint to identify the 404 error.
- Check the server source code on Gitea to confirm the install route definition.
- Verify the server binary version and determine it was outdated.
- Identify the Nginx Proxy Manager as the cause of the 404 error by checking the server logs and configuration.
- Extract MediCat to a USB stick to prepare for a Sophos removal task.
- Address a separate message about a server rebuild needed for a discovery fix.
Problems Encountered
- The initial PowerShell command resulted in a 404 error, indicating the install endpoint was not functioning.
- The assistant had to determine the cause of the 404 error by checking the server status and code.
- The server binary was outdated, requiring a rebuild to apply the latest discovery fixes.
- The Nginx Proxy Manager was configured to serve static files instead of proxying to the server, causing the 404 error.
- The MediCat extraction process was time-consuming due to the large size of the data.
Configuration Changes
Machine-extracted verbatim from the transcript (file targets of Write/Edit/NotebookEdit).
- [created]
D:\claudetools\projects\msp-tools\guru-rmm\docs\specs\SPEC-015-safeboot-network-registration.md - [modified]
D:\claudetools\projects\msp-tools\guru-rmm\docs\FEATURE_ROADMAP.md - [created]
D:\claudetools\projects\msp-tools\guru-rmm\docs\specs\SPEC-016-vss-shadow-copy-management.md - [created]
D:\Downloads\RecoveryUSB\usb-data\scripts\remove-sophos.sh - [created]
D:\Downloads\RecoveryUSB\usb-data\scripts\setup-claude.sh - [created]
D:\Downloads\RecoveryUSB\usb-data\README.txt - [created]
D:\Downloads\RecoveryUSB\usb-data\scripts\remove-sophos-winpe.cmd - [created]
D:\Downloads\RecoveryUSB\usb-data\README-WINPE.txt
Credentials & Secrets
Machine-extracted; review carefully -- secrets are not auto-harvested from transcripts.
- none detected (verify against the Commands & Outputs section)
Infrastructure & Servers
Machine-extracted verbatim (IP / hostname regex hits across the whole transcript).
- IPs:
172.16.3.30,172.16.3.20,127.0.0.1,0.0.0.0,100.101.122.4,204.62.247.81,6.5.60.172,1.69.17.2 - Hosts:
rmm.azcomputerguru.com,system.net.httpwebrequest,microsoft.powershell.commands.invokerestmethodcommand,json.tool,vault.sh,gitea.sops.yaml,git.azcomputerguru.com,gitea-howard.sops.yaml,env.example,context.md,product.md,05-13.md,build-server.sh,docker-compose.yml,config.rs,crypto.rs,email.rs,main.rs,status.rs,webhook.rs,agents.rs,alerts.rs,auth.rs,changelog.rs,checks.rs,clients.rs,commands.rs,credentials.rs,discovery.rs,enroll.rs,install.rs,inventory.rs,logs.rs,maintenance.rs,metrics.rs,mod.rs,mspbackups.rs,organizations.rs,policies.rs,registry.rs
Commands & Outputs
Machine-extracted verbatim: mutating Bash/PowerShell commands with truncated output.
curl -s "http://172.16.3.30:8001/api/coord/status" | python -m json.tool 2>/dev/null || curl -s "http://172.16.3.30:8001/api/coord/status"
Output: {
"active_lock_count": 0,
"active_workflow_count": 0,
"locks_by_project": {},
"active_workflows": [],
"components_by_project": {
"claudetools": [
{
"project_key": "claudetools",
"component": "api",
"sta ... [truncated]
curl -s "https://rmm.azcomputerguru.com/api/sites?page=1&per_page=5" -H "Content-Type: application/json" 2>/dev/null | head -c 500
Output: (Bash completed with no output)
curl -s -o /dev/null -w "%{http_code}" "https://rmm.azcomputerguru.com/install/WARM-FALCON-5891/windows" && curl -s -o /dev/null -w "\n%{http_code}" "https://rmm.azcomputerguru.com/api/enroll/WARM-FALCON-5891"
Output: submodule empty
curl -s "http://172.16.3.20:3000/api/v1/repos/azcomputerguru/gururmm/contents/src" -H "Authorization: token $(bash D:/vault/scripts/vault.sh get-field infrastructure/gitea.sops.yaml credentials.api_token 2>/dev/null)" 2>/dev/null | python -c "import sys,json; [print(f['name']) for f in json.load(sys.stdin)]" 2>/dev/null | head -20
Output: (Bash completed with no output)
GITEA_TOKEN=$(bash D:/vault/scripts/vault.sh get-field infrastructure/gitea.sops.yaml credentials.api_token 2>/dev/null)
echo "Token length: ${#GITEA_TOKEN}"
curl -s -w "\nHTTP: %{http_code}" "http://172.16.3.20:3000/api/v1/repos/azcomputerguru/gururmm" -H "Authorization: token $GITEA_TOKEN" 2>/dev/null | tail -5
Output: Token length: 0 {"errors":null,"message":"not found","url":"https://git.azcomputerguru.com/api/swagger"}
HTTP: 404
bash D:/vault/scripts/vault.sh search gitea 2>/dev/null
Output: services/gitea-howard.sops.yaml:name: Howard Enos - Gitea services/gitea-howard.sops.yaml:gitea_username: howard services/gitea.sops.yaml:name: Gitea
bash D:/vault/scripts/vault.sh get-field services/gitea.sops.yaml credentials.api_token 2>/dev/null | head -c 20
Output: null
bash D:/vault/scripts/vault.sh get services/gitea.sops.yaml 2>/dev/null
Output: kind: service name: Gitea url: https://git.azcomputerguru.com status: active tags: - service - git - infrastructure credentials: username: azcomputerguru password: Gptf*77ttb123!@#-git api: api-token: 9b1da4b79a38ef782268341d25a4b6880572063f ssh: ssh-uri: ... [truncated]
GITEA_TOKEN="9b1da4b79a38ef782268341d25a4b6880572063f"
curl -s "http://172.16.3.20:3000/api/v1/repos/azcomputerguru/gururmm/git/trees/main?recursive=false" \
-H "Authorization: token $GITEA_TOKEN" | python -c "import sys,json; d=json.load(sys.stdin); [print(t['path']) for t in d.get('tree',[])]" 2>/dev/null | grep -E "\.rs$" | head -20
Output: (Bash completed with no output)
GITEA_TOKEN="9b1da4b79a38ef782268341d25a4b6880572063f"
curl -s "http://172.16.3.20:3000/api/v1/repos/azcomputerguru/gururmm/contents/src" \
-H "Authorization: token $GITEA_TOKEN" | python -c "import sys,json; d=json.load(sys.stdin); [print(f['name']) for f in (d if isinstance(d, list) else [])]" 2>/dev/null
Output: (Bash completed with no output)
GITEA_TOKEN="9b1da4b79a38ef782268341d25a4b6880572063f"
curl -s -w "\nHTTP:%{http_code}" "http://172.16.3.20:3000/api/v1/repos/azcomputerguru/gururmm/contents/src" \
-H "Authorization: token $GITEA_TOKEN" 2>/dev/null | tail -3
Output: {"errors":["object does not exist [id: , rel_path: src]"],"message":"GetContentsOrList","url":"https://git.azcomputerguru.com/api/swagger"}
HTTP:404
GITEA_TOKEN="9b1da4b79a38ef782268341d25a4b6880572063f"
# List root contents
curl -s "http://172.16.3.20:3000/api/v1/repos/azcomputerguru/gururmm/contents/" \
-H "Authorization: token $GITEA_TOKEN" | python -c "import sys,json; d=json.load(sys.stdin); [print(f['name'], f['type']) for f in (d if isinstance(d, list) else [])]" 2>/dev/null
Output: .env.example file
.gitattributes file
.gitignore file
CONTEXT.md file
PHASE4_IMPLEMENTATION.md file
PRODUCT.md file
PROJECT_STATE.md file
REBUILD_PLAN.md file
SESSION_WORK_2026-05-13.md file
agent-legacy dir
agent dir
assets dir
build-server.sh file
changelogs dir
dashboard dir
deploy ... [truncated]
GITEA_TOKEN="9b1da4b79a38ef782268341d25a4b6880572063f"
# Search for install route in server directory
curl -s "http://172.16.3.20:3000/api/v1/repos/azcomputerguru/gururmm/contents/server/src" \
-H "Authorization: token $GITEA_TOKEN" | python -c "import sys,json; d=json.load(sys.stdin); [print(f['name']) for f in (d if isinstance(d, list) else [])]" 2>/dev/null
Output: alerts
api
auth
authz
config.rs
crypto.rs
db
email.rs
main.rs
mspbackups
policy
status.rs
updates
webhook.rs
ws
GITEA_TOKEN="9b1da4b79a38ef782268341d25a4b6880572063f"
curl -s "http://172.16.3.20:3000/api/v1/repos/azcomputerguru/gururmm/contents/server/src/api" \
-H "Authorization: token $GITEA_TOKEN" | python -c "import sys,json; d=json.load(sys.stdin); [print(f['name']) for f in (d if isinstance(d, list) else [])]" 2>/dev/null
Output: agents.rs
alert_email_settings.rs
alert_templates.rs
alerts.rs
auth.rs
changelog.rs
checks.rs
clients.rs
commands.rs
credentials.rs
discovery.rs
enroll.rs
event_log_query.rs
event_log_watches.rs
install.rs
install_report.rs
inventory.rs
logs.rs
maintenance.rs
metrics.rs
mod.rs
m ... [truncated]
GITEA_TOKEN="9b1da4b79a38ef782268341d25a4b6880572063f"
curl -s "http://172.16.3.20:3000/api/v1/repos/azcomputerguru/gururmm/raw/server/src/api/install.rs" \
-H "Authorization: token $GITEA_TOKEN" 2>/dev/null
Output: Output too large (51.9KB). Full output saved to: C:\Users\guru.claude\projects\D--claudetools\5b023e80-29e9-4b73-adc1-a36bc6c46dfd\tool-results\bib9yvhx0.txt
Preview (first 2KB): //! Agent installation script endpoints //! //! Provides endpoints for generating installation scrip ... [truncated]
GITEA_TOKEN="9b1da4b79a38ef782268341d25a4b6880572063f"
curl -s "http://172.16.3.20:3000/api/v1/repos/azcomputerguru/gururmm/raw/server/src/main.rs" \
-H "Authorization: token $GITEA_TOKEN" 2>/dev/null | grep -A2 -i "install"
Output: Output too large (51.9KB). Full output saved to: C:\Users\guru.claude\projects\D--claudetools\5b023e80-29e9-4b73-adc1-a36bc6c46dfd\tool-results\bib9yvhx0.txt
Preview (first 2KB): //! Agent installation script endpoints //! //! Provides endpoints for generating installation scrip ... [truncated]
VAULT="D:/vault/scripts/vault.sh"
DB_PASS=$(bash "$VAULT" get-field projects/claudetools/database.sops.yaml credentials.password 2>/dev/null)
mysql -h 172.16.3.30 -u claudetools -p"$DB_PASS" gururmm -e "SELECT id, name, site_code, is_active, client_id FROM sites WHERE site_code = 'WARM-FALCON-5891';" 2>/dev/null
Output: Exit code 127
VAULT="D:/vault/scripts/vault.sh"
DB_PASS=$(bash "$VAULT" get-field projects/claudetools/database.sops.yaml credentials.password 2>/dev/null)
# Try via docker exec on the MariaDB container (Jupiter runs the DB)
ssh -o StrictHostKeyChecking=no -i "C:/Users/guru/.ssh/id_ed25519" guru@172.16.3.30 \
"docker exec mariadb mysql -u claudetools -p'$DB_PASS' gururmm -e \"SELECT id, name, site_code, is_active, client_id FROM sites WHERE site_code = 'WARM-FALCON-5891';\"" 2>/dev/null
Output: Exit code 1
ssh -o StrictHostKeyChecking=no -o ConnectTimeout=5 guru@172.16.3.30 "echo ok" 2>&1
Output: ok
VAULT="D:/vault/scripts/vault.sh"
DB_PASS=$(bash "$VAULT" get-field projects/claudetools/database.sops.yaml credentials.password 2>/dev/null)
echo "Pass len: ${#DB_PASS}"
ssh guru@172.16.3.30 "docker ps --format '{{.Names}}' | grep -i maria" 2>/dev/null
Output: Exit code 1 Pass len: 35
ssh guru@172.16.3.30 "docker ps --format '{{.Names}}'" 2>/dev/null
Output: (Bash completed with no output)
ssh guru@172.16.3.30 "docker ps 2>/dev/null; echo '---'; docker ps -a 2>/dev/null | head -5"
Output: CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
VAULT="D:/vault/scripts/vault.sh"
DB_PASS=$(bash "$VAULT" get-field projects/claudetools/database.sops.yaml credentials.password 2>/dev/null)
ssh guru@172.16.3.30 "mysql -u claudetools -p'$DB_PASS' gururmm -e \"SELECT id, name, site_code, is_active FROM sites WHERE site_code = 'WARM-FALCON-5891';\" 2>/dev/null"
Output: Exit code 1
ssh guru@172.16.3.30 "which mysql; mysql --version 2>/dev/null; systemctl status mariadb 2>/dev/null | head -5"
Output: /usr/bin/mysql mysql Ver 15.1 Distrib 10.6.22-MariaDB, for debian-linux-gnu (x86_64) using EditLine wrapper ● mariadb.service - MariaDB 10.6.22 database server Loaded: loaded (/lib/systemd/system/mariadb.service; enabled; vendor preset: enabled) Active: active (running) since Mon 2026-05 ... [truncated]
VAULT="D:/vault/scripts/vault.sh"
DB_PASS=$(bash "$VAULT" get-field projects/claudetools/database.sops.yaml credentials.password 2>/dev/null)
ssh guru@172.16.3.30 "mysql -u claudetools -p'${DB_PASS}' gururmm 2>&1 -e \"SELECT id, name, site_code, is_active FROM sites WHERE site_code = 'WARM-FALCON-5891';\"" 2>&1
Output: Exit code 1 ERROR 1044 (42000): Access denied for user 'claudetools'@'localhost' to database 'gururmm'
bash D:/vault/scripts/vault.sh search gururmm 2>/dev/null
Output: clients/cascades-tucson/gururmm-site-main.sops.yaml:name: GuruRMM Site Enrollment Key - Cascades of Tucson / CascadesTucson clients/cascades-tucson/gururmm-site-main.sops.yaml: - gururmm clients/imc/gururmm-site-main.sops.yaml:name: GuruRMM Site Enrollment Key - Instrumental Music Center / IMCMai ... [truncated]
bash D:/vault/scripts/vault.sh get projects/gururmm/database.sops.yaml 2>/dev/null
Output: kind: database name: GuruRMM Database url: postgres://172.16.3.30:5432/gururmm host: 172.16.3.30 port: 5432 database: gururmm status: active tags: - gururmm - project credentials: username: gururmm password: 43617ebf7eb242e814ca9988cc4df5ad notes: PostgreSQL 14. Also on Jupiter conta ... [truncated]
ssh guru@172.16.3.30 "PGPASSWORD='43617ebf7eb242e814ca9988cc4df5ad' psql -h localhost -U gururmm -d gururmm -c \"SELECT id, name, site_code, is_active, client_id FROM sites WHERE site_code = 'WARM-FALCON-5891';\"" 2>&1
Output: id | name | site_code | is_active | client_id
--------------------------------------+--------+------------------+-----------+--------------------------------------
8146db49-cc9d-41b3-b8e6-972bf074510b | Norris | WARM-FALCON-5891 | t | 9d ... [truncated]
GITEA_TOKEN="9b1da4b79a38ef782268341d25a4b6880572063f"
curl -s "http://172.16.3.20:3000/api/v1/repos/azcomputerguru/gururmm/commits?path=server/src/api/install.rs&limit=5" \
-H "Authorization: token $GITEA_TOKEN" | python -c "
import sys, json
d = json.load(sys.stdin)
for c in d:
print(c['sha'][:8], c['commit']['message'][:80], c['commit']['author']['date'][:10])
" 2>/dev/null
Output: e239b276 fix(install): stage binary in Program Files to bypass execution policy
%TEMP% e 2026-05-28
5e447737 fix(install): unblock downloaded EXE before executing on Windows
Windows marks 2026-05-28
9d917c37 fix: 2026-05-19 audit remediation — security, quality, three new UI pages
Ser 20 ... [truncated]
ssh guru@172.16.3.30 "PGPASSWORD='43617ebf7eb242e814ca9988cc4df5ad' psql -h localhost -U gururmm -d gururmm -c \"SELECT c.name AS client_name FROM clients c WHERE c.id = '9d17778d-e117-4dab-a190-7de7273a4a54';\"" 2>&1
Output: e239b276 fix(install): stage binary in Program Files to bypass execution policy
%TEMP% e 2026-05-28
5e447737 fix(install): unblock downloaded EXE before executing on Windows
Windows marks 2026-05-28
9d917c37 fix: 2026-05-19 audit remediation — security, quality, three new UI pages
Ser 20 ... [truncated]
ssh guru@172.16.3.30 "PGPASSWORD='43617ebf7eb242e814ca9988cc4df5ad' psql -h localhost -U gururmm -d gururmm -c \"SELECT name, site_code, is_active FROM sites LIMIT 5;\"" 2>&1
Output: name | site_code | is_active ----------------------+------------------+----------- SLC - Salt Lake City | DARK-GROVE-7839 | t Main Office | INNER-TIGER-8330 | t Main Office | WEST-MEADOW-9025 | t Mike's Car | GREEN-OCEAN-5222 | t Main ... [truncated]
ssh guru@172.16.3.30 "journalctl -u gururmm --since '5 minutes ago' --no-pager 2>/dev/null | tail -30" 2>/dev/null
Output: name | site_code | is_active ----------------------+------------------+----------- SLC - Salt Lake City | DARK-GROVE-7839 | t Main Office | INNER-TIGER-8330 | t Main Office | WEST-MEADOW-9025 | t Mike's Car | GREEN-OCEAN-5222 | t Main ... [truncated]
ssh guru@172.16.3.30 "systemctl list-units --type=service --state=running 2>/dev/null | grep -i guru; ps aux | grep gururmm | grep -v grep" 2>/dev/null
Output: guruconnect.service loaded active running GuruConnect Remote Desktop Server gururmm-agent.service loaded active running GuruRMM Agent - Remote Monitoring and Management gururmm-server.service loaded active running GuruRMM Server - API and WebSocket gururmm-web ... [truncated]
ssh guru@172.16.3.30 "curl -s -o /dev/null -w '%{http_code}' http://localhost:3001/install/DARK-GROVE-7839/windows 2>/dev/null"
Output: 200
ssh guru@172.16.3.30 "find /etc/nginx /opt/nginx-proxy-manager -name '*.conf' 2>/dev/null | xargs grep -l 'rmm.azcomputerguru' 2>/dev/null | head -5"
Output: (Bash completed with no output)
ssh guru@172.16.3.30 "find / -path /proc -prune -o -name '*.conf' -print 2>/dev/null | xargs grep -l 'rmm.azcomputerguru' 2>/dev/null | head -10" 2>/dev/null
Output: (Bash completed with no output)
ssh guru@172.16.3.30 "systemctl list-units --type=service --state=running 2>/dev/null | grep -iE 'nginx|proxy'; which nginx; nginx -v 2>&1" 2>/dev/null
Output: nginx.service loaded active running A high performance web server and a reverse proxy server /usr/sbin/nginx nginx version: nginx/1.18.0 (Ubuntu)
ssh guru@172.16.3.30 "nginx -T 2>/dev/null | grep -A 30 'rmm.azcomputerguru'" 2>/dev/null
Output: Exit code 1
ssh guru@172.16.3.30 "nginx -T 2>/dev/null | grep 'server_name' | grep rmm" 2>/dev/null
ssh guru@172.16.3.30 "ls /etc/nginx/sites-enabled/ /etc/nginx/conf.d/ 2>/dev/null" 2>/dev/null
Output: /etc/nginx/conf.d/:
/etc/nginx/sites-enabled/: gururmm gururmm.bak-20260528-081021
ssh guru@172.16.3.30 "cat /etc/nginx/sites-enabled/gururmm" 2>/dev/null
Output: server { listen 80; server_name _;
# Dashboard (SPA)
root /var/www/gururmm/dashboard;
index index.html;
# Downloads
location /downloads/ {
add_header Cache-Control "public, max-age=300, must-revalidate" always;
alias /var/www/gururmm/downloads/; ... [truncated]
ssh guru@172.16.3.30 "ls /var/www/gururmm/install/ 2>/dev/null || echo 'empty or missing'"
Output: scileppi scileppi-diag
ssh guru@172.16.3.30 "ls /var/www/gururmm/install/scileppi/ 2>/dev/null"
Output: Exit code 2
ssh guru@172.16.3.30 "ls -la /var/www/gururmm/install/ 2>/dev/null"
Output: total 16 drwxr-xr-x 2 root root 4096 May 28 19:38 . drwxr-xr-x 7 root root 4096 May 28 18:40 .. -rwxr-xr-x 1 guru guru 3418 May 28 19:38 scileppi -rwxr-xr-x 1 guru guru 2376 May 28 18:57 scileppi-diag
ssh guru@172.16.3.30 "cat /etc/nginx/sites-enabled/gururmm.bak-20260528-081021 | grep -A 8 'location /install'"
Output: Exit code 1
ssh guru@172.16.3.30 "ls /etc/nginx/sites-enabled/"
Output: gururmm gururmm.bak-20260528-081021
ssh guru@172.16.3.30 "cat '/etc/nginx/sites-enabled/gururmm.bak-20260528-081021'" 2>/dev/null | grep -A 8 "install"
Output: (Bash completed with no output)
ssh guru@172.16.3.30 "cat '/etc/nginx/sites-enabled/gururmm.bak-20260528-081021'" 2>/dev/null
Output: server { listen 80; server_name _;
# Dashboard (SPA)
root /var/www/gururmm/dashboard;
index index.html;
# Downloads
location /downloads/ {
add_header Cache-Control "public, max-age=300, must-revalidate" always;
alias /var/www/gururmm/downloads/; ... [truncated]
ssh guru@172.16.3.30 "sudo tee /etc/nginx/sites-enabled/gururmm > /dev/null" << 'NGINX_CONF'
server {
listen 80;
server_name _;
# Dashboard (SPA)
root /var/www/gururmm/dashboard;
index index.html;
# Downloads
location /downloads/ {
add_header Cache-Control "public, max-age=300, must-revalidate" always;
alias /var/www/gururmm/downloads/;
autoindex on;
}
# Coordination API proxy (^~ stops regex matching)
location ^~ /api/coord/ {
proxy_pass http://127.0.0.1:8001;
proxy_http_version 1.1;
proxy_set_header Host $host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_set_header X-Forwarded-Proto $scheme;
}
# API proxy
location /api/ {
proxy_pass http://127.0.0.1:3001;
proxy_http_version 1.1;
proxy_set_header Host $host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_set_header X-Forwarded-Proto $scheme;
}
# Install script endpoints (dynamic, served by GuruRMM server)
location /install/ {
proxy_pass http://127.0.0.1:3001;
proxy_http_version 1.1;
proxy_set_header Host $host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_set_header X-Forwarded-Proto $scheme;
}
# WebSocket proxy
location /ws {
proxy_pass http://127.0.0.1:3001;
proxy_http_version 1.1;
proxy_set_header Upgrade $http_upgrade;
proxy_set_header Connection "upgrade";
proxy_set_header Host $host;
proxy_set_header X-Real-IP $remote_addr;
proxy_read_timeout 86400;
}
# Health check (direct to API)
location /health {
proxy_pass http://127.0.0.1:3001;
}
# Webhook endpoint for CI builds
location /webhook/ {
proxy_pass http://127.0.0.1:9000;
proxy_http_version 1.1;
proxy_set_header Host $host;
proxy_set_header X-Real-IP $remote_addr;
}
# SPA fallback - serve index.html for all other routes
location / {
try_files $uri $uri/ /index.html;
}
}
NGINX_CONF
Output: (Bash completed with no output)
ssh guru@172.16.3.30 "sudo nginx -t 2>&1"
Output: nginx: [warn] conflicting server name "_" on 0.0.0.0:80, ignored nginx: the configuration file /etc/nginx/nginx.conf syntax is ok nginx: configuration file /etc/nginx/nginx.conf test is successful
ssh guru@172.16.3.30 "sudo systemctl reload nginx && echo 'reloaded'"
Output: reloaded
ssh guru@172.16.3.30 "sudo rm -f /var/www/gururmm/install/scileppi /var/www/gururmm/install/scileppi-diag && ls /var/www/gururmm/install/" 2>/dev/null
Output: (Bash completed with no output)
ssh guru@172.16.3.30 "PGPASSWORD='43617ebf7eb242e814ca9988cc4df5ad' psql -h localhost -U gururmm -d gururmm -c \"
SELECT a.id, a.hostname, a.os_version, a.last_seen, a.agent_version, a.ip_address,
a.is_online, a.created_at
FROM agents a
JOIN sites s ON a.site_id = s.id
WHERE s.site_code = 'WARM-FALCON-5891'
ORDER BY a.created_at DESC LIMIT 5;
\"" 2>&1
Output: Exit code 1 ERROR: column a.ip_address does not exist LINE 2: ...name, a.os_version, a.last_seen, a.agent_version, a.ip_addre... ^
ssh guru@172.16.3.30 "PGPASSWORD='43617ebf7eb242e814ca9988cc4df5ad' psql -h localhost -U gururmm -d gururmm -c \"
SELECT a.hostname, i.key, i.value
FROM agents a
JOIN sites s ON a.site_id = s.id
JOIN inventory i ON i.agent_id = a.id
WHERE s.site_code = 'WARM-FALCON-5891'
AND i.key IN ('os_build', 'os_edition', 'manufacturer', 'model', 'cpu', 'ram_gb', 'domain', 'domain_joined')
ORDER BY a.created_at DESC, i.key;
\"" 2>&1
Output: Exit code 1 ERROR: column a.ip_address does not exist LINE 2: ...name, a.os_version, a.last_seen, a.agent_version, a.ip_addre... ^
ssh guru@172.16.3.30 "PGPASSWORD='43617ebf7eb242e814ca9988cc4df5ad' psql -h localhost -U gururmm -d gururmm -c \"\\d agents\"" 2>&1 | head -40
Output: Table "public.agents"
Column | Type | Collation | Nullable | Default
-----------------------+--------------------------+-----------+----------+------------------------------
id | uuid | | not ... [truncated]
ssh guru@172.16.3.30 "PGPASSWORD='43617ebf7eb242e814ca9988cc4df5ad' psql -h localhost -U gururmm -d gururmm -c \"
SELECT a.id, a.hostname, a.os_name, a.os_version, a.architecture,
a.agent_version, a.status, a.last_seen, a.created_at
FROM agents a
JOIN sites s ON a.site_id = s.id
WHERE s.site_code = 'WARM-FALCON-5891'
ORDER BY a.created_at DESC LIMIT 10;
\"" 2>&1
Output: id | hostname | os_name | os_version | architecture | agent_version | status | last_seen | created_at
--------------------------------------+----------+---------+------------+--------------+---------------+--------+---------------------------- ... [truncated]
ssh guru@172.16.3.30 "PGPASSWORD='43617ebf7eb242e814ca9988cc4df5ad' psql -h localhost -U gururmm -d gururmm -c \"
SELECT key, value FROM inventory WHERE agent_id = '97fe5582-aa3d-4132-94a6-f4c8582bca31' ORDER BY key;
\"" 2>&1
Output: Exit code 1 ERROR: relation "inventory" does not exist LINE 2: SELECT key, value FROM inventory WHERE agent_id = '97fe5582-... ^
ssh guru@172.16.3.30 "PGPASSWORD='43617ebf7eb242e814ca9988cc4df5ad' psql -h localhost -U gururmm -d gururmm -c \"\dt\"" 2>&1 | grep -i "inv\|hard\|check\|event"
Output: public | agent_events | table | gururmm public | agent_hardware | table | gururmm public | agent_update_events | table | gururmm public | check_history | table | gururmm public | check_results | table | gururmm public | checks ... [truncated]
ssh guru@172.16.3.30 "PGPASSWORD='43617ebf7eb242e814ca9988cc4df5ad' psql -h localhost -U gururmm -d gururmm -c \"
SELECT * FROM agent_hardware WHERE agent_id = '97fe5582-aa3d-4132-94a6-f4c8582bca31';
\"" 2>&1
Output: agent_id | manufacturer | model | serial_number | bios_version | cpu_model | cpu_cores | cpu_threads | cpu_speed_mhz | total_memory_mb | disks | network_interfaces | installed_software | services | os_name | os_version | os_build | agent_version | last_collected | updated_at | is_virtual_machine | h ... [truncated]
ssh guru@172.16.3.30 "PGPASSWORD='43617ebf7eb242e814ca9988cc4df5ad' psql -h localhost -U gururmm -d gururmm -c \"
SELECT event_type, message, created_at
FROM agent_events
WHERE agent_id = '97fe5582-aa3d-4132-94a6-f4c8582bca31'
ORDER BY created_at DESC LIMIT 20;
\"" 2>&1
Output: Exit code 1 ERROR: column "message" does not exist LINE 2: SELECT event_type, message, created_at ^
# Check the GuruRMM API for commands endpoint and run a diagnostic on LS-2
GITEA_TOKEN="9b1da4b79a38ef782268341d25a4b6880572063f"
curl -s "http://172.16.3.20:3000/api/v1/repos/azcomputerguru/gururmm/raw/server/src/api/commands.rs" \
-H "Authorization: token $GITEA_TOKEN" 2>/dev/null | grep -E "route|fn |pub async" | head -30
Output: Exit code 1 ERROR: column "message" does not exist LINE 2: SELECT event_type, message, created_at ^
ssh guru@172.16.3.30 "PGPASSWORD='43617ebf7eb242e814ca9988cc4df5ad' psql -h localhost -U gururmm -d gururmm -c \"\d agent_events\"" 2>&1
Output: Table "public.agent_events"
Column | Type | Collation | Nullable | Default
------------+--------------------------+-----------+----------+------------------------------------------
id | bigint | | not nul ... [truncated]
ssh guru@172.16.3.30 "PGPASSWORD='43617ebf7eb242e814ca9988cc4df5ad' psql -h localhost -U gururmm -d gururmm -c \"
SELECT event_type, detail, event_ts
FROM agent_events
WHERE agent_id = '97fe5582-aa3d-4132-94a6-f4c8582bca31'
ORDER BY event_ts DESC LIMIT 20;
\"" 2>&1
Output: event_type | detail | event_ts
------------+--------+-------------------------------
online | {} | 2026-05-28 21:10:21.552694+00
(1 row)
GITEA_TOKEN="9b1da4b79a38ef782268341d25a4b6880572063f"
# Check what commands endpoints exist and their structure
curl -s "http://172.16.3.20:3000/api/v1/repos/azcomputerguru/gururmm/raw/server/src/main.rs" \
-H "Authorization: token $GITEA_TOKEN" 2>/dev/null | grep -E "command|script|execute|run" | grep "route" | head -20
Output: .route("/install/cleanup", get(api::install::cleanup_script)) .route("/install/cleanup/download", get(api::install::download_cleanup_script)) .route("/install/:site_code/windows", get(api::install::install_script_windows)) .route("/install/:site_code/linux", ... [truncated]
GITEA_TOKEN="9b1da4b79a38ef782268341d25a4b6880572063f"
curl -s "http://172.16.3.20:3000/api/v1/repos/azcomputerguru/gururmm/raw/server/src/main.rs" \
-H "Authorization: token $GITEA_TOKEN" 2>/dev/null | grep "route" | grep -v "//\|install\|download" | head -40
Output: let app = build_router(state); fn build_router(state: AppState) -> Router { .route("/health", get(health_check)) .route("/status", get(status::system_status)) .route("/ws", get(ws::ws_handler)) .nest("/api", api::routes())
GITEA_TOKEN="9b1da4b79a38ef782268341d25a4b6880572063f"
curl -s "http://172.16.3.20:3000/api/v1/repos/azcomputerguru/gururmm/raw/server/src/api/mod.rs" \
-H "Authorization: token $GITEA_TOKEN" 2>/dev/null | grep -E "route|command|script|run" | head -40
Output: //! REST API routes pub mod commands; pub mod scripts; /// Used by agent-targeted handlers (command dispatch, script execution) so the /// Build all API routes pub fn routes() -> Router { .route("/auth/login", post(auth::login)) .route("/auth/register", post(auth::register) ... [truncated]
GITEA_TOKEN="9b1da4b79a38ef782268341d25a4b6880572063f"
curl -s "http://172.16.3.20:3000/api/v1/repos/azcomputerguru/gururmm/raw/server/src/api/mod.rs" \
-H "Authorization: token $GITEA_TOKEN" 2>/dev/null | grep -E "command|script" | head -20
Output: pub mod commands; pub mod scripts; /// Used by agent-targeted handlers (command dispatch, script execution) so the .route("/agents/:id/command", post(commands::send_command)) .route("/commands", get(commands::list_commands).delete(commands::clear_command_history)) .route("/co ... [truncated]
GITEA_TOKEN="9b1da4b79a38ef782268341d25a4b6880572063f"
curl -s "http://172.16.3.20:3000/api/v1/repos/azcomputerguru/gururmm/raw/server/src/api/commands.rs" \
-H "Authorization: token $GITEA_TOKEN" 2>/dev/null | grep -A 20 "pub async fn send_command"
Output: pub async fn send_command( State(state): State, auth: AuthUser, Path(agent_id): Path, Json(req): Json, ) -> Result<Json, (StatusCode, String)> { // Log the command request with user info let context = req.context.unwrap ... [truncated]
GITEA_TOKEN="9b1da4b79a38ef782268341d25a4b6880572063f"
curl -s "http://172.16.3.20:3000/api/v1/repos/azcomputerguru/gururmm/raw/server/src/api/commands.rs" \
-H "Authorization: token $GITEA_TOKEN" 2>/dev/null | grep -B2 -A 10 "SendCommandRequest"
Output: /// Request to send a command to an agent #[derive(Debug, Deserialize)] pub struct SendCommandRequest { /// Command type (shell, powershell, python, script) pub command_type: String,
/// Command text to execute
pub command: String,
/// Timeout in seconds (optional, default 300) ... [truncated]
# Get an auth token for the GuruRMM API
GURU_PASS=$(bash D:/vault/scripts/vault.sh get-field projects/gururmm/api-server.sops.yaml credentials.password 2>/dev/null)
GURU_USER=$(bash D:/vault/scripts/vault.sh get-field projects/gururmm/api-server.sops.yaml credentials.username 2>/dev/null)
echo "User: $GURU_USER | Pass len: ${#GURU_PASS}"
Output: User: null | Pass len: 4
bash D:/vault/scripts/vault.sh get projects/gururmm/api-server.sops.yaml 2>/dev/null
Output: kind: api-key name: GuruRMM API Server external-url: https://rmm-api.azcomputerguru.com internal-url: http://172.16.3.30:3001 status: active tags: - gururmm - project credentials: credential: ZNzGxghru2XUdBVlaf2G2L1YUBVcl5xH0lr/Gpf/QmE= credential_encryption_key: 6d38f7d3cec9d62998e3 ... [truncated]
bash D:/vault/scripts/vault.sh get projects/gururmm/dashboard.sops.yaml 2>/dev/null
Output: kind: service name: GuruRMM Dashboard url: https://rmm.azcomputerguru.com status: active tags: - gururmm - project credentials: username: admin@azcomputerguru.com password: GuruRMM2025 notes: Admin role.
# Authenticate to GuruRMM API
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"username":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; d=json.load(sys.stdin); print(d.get('token',''))" 2>/dev/null)
echo "Token: ${TOKEN:0:30}..."
# Send diagnostic PowerShell command to LS-2
AGENT_ID="97fe5582-aa3d-4132-94a6-f4c8582bca31"
DIAG_SCRIPT=$(cat << 'PSEOF'
$cad = (Get-ItemProperty -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon' -Name 'DisableCAD' -ErrorAction SilentlyContinue).DisableCAD
$cadStatus = if ($cad -eq $null) {'Not set (CAD required)'} elseif ($cad -eq 1) {'Disabled (no CAD required)'} else {'Enabled (CAD required)'}
$filterKeys = (Get-ItemProperty -Path 'HKCU:\Control Panel\Accessibility\FilterKeys' -Name 'Flags' -ErrorAction SilentlyContinue).Flags
$mouseKeys = (Get-ItemProperty -Path 'HKCU:\Control Panel\Accessibility\MouseKeys' -Name 'Flags' -ErrorAction SilentlyContinue).Flags
$startups = Get-CimInstance Win32_StartupCommand | Select-Object Name, Command, Location | ConvertTo-Json -Compress
$runningProcs = Get-Process | Where-Object {$_.MainWindowTitle -ne '' -and $_.MainWindowTitle -ne $null} | Select-Object Name, Id, MainWindowTitle | ConvertTo-Json -Compress
$shellExp = Get-Process -Name 'ShellExperienceHost' -ErrorAction SilentlyContinue | Select-Object Id, CPU, StartTime | ConvertTo-Json -Compress
[PSCustomObject]@{
DisableCAD = $cadStatus
FilterKeyFlags = $filterKeys
MouseKeyFlags = $mouseKeys
StartupItems = $startups
VisibleWindows = $runningProcs
ShellExpHost = $shellExp
ComputerName = $env:COMPUTERNAME
UserName = $env:USERNAME
} | ConvertTo-Json
PSEOF
)
CMD_ID=$(curl -s -X POST "http://172.16.3.30:3001/api/agents/$AGENT_ID/command" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer $TOKEN" \
-d "{\"command_type\":\"powershell\",\"command\":$(echo "$DIAG_SCRIPT" | python -c 'import sys,json; print(json.dumps(sys.stdin.read()))'),\"timeout_seconds\":30}" \
| python -c "import sys,json; d=json.load(sys.stdin); print(d.get('command_id','ERROR: '+str(d)))" 2>/dev/null)
echo "Command ID: $CMD_ID"
Output: Token: ... Command ID:
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"username":"admin@azcomputerguru.com","password":"GuruRMM2025"}' 2>/dev/null)
echo "$TOKEN" | python -c "import sys,json; d=json.load(sys.stdin); print(list(d.keys()))" 2>/dev/null
echo "$TOKEN" | head -c 300
Output: Failed to deserialize the JSON body into the target type: missing field email at line 1 column 64
TOKEN_RESP=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}')
echo "$TOKEN_RESP" | python -c "import sys,json; d=json.load(sys.stdin); print(list(d.keys()))" 2>/dev/null
TOKEN=$(echo "$TOKEN_RESP" | python -c "import sys,json; d=json.load(sys.stdin); print(d.get('token',''))" 2>/dev/null)
echo "Token len: ${#TOKEN}"
Output: ['token', 'user']
Token len: 221
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
AGENT_ID="97fe5582-aa3d-4132-94a6-f4c8582bca31"
DIAG='$cad=(Get-ItemProperty "HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" -Name DisableCAD -EA SilentlyContinue).DisableCAD; $fk=(Get-ItemProperty "HKCU:\Control Panel\Accessibility\FilterKeys" -Name Flags -EA SilentlyContinue).Flags; $mk=(Get-ItemProperty "HKCU:\Control Panel\Accessibility\MouseKeys" -Name Flags -EA SilentlyContinue).Flags; $su=Get-CimInstance Win32_StartupCommand|Select Name,Command,Location; $wins=Get-Process|Where{$_.MainWindowTitle}|Select Name,Id,MainWindowTitle; Write-Output "=CAD= DisableCAD=$cad"; Write-Output "=ACC= FilterKeys=$fk MouseKeys=$mk"; Write-Output "=SHELL_EXP= $(Get-Process ShellExperienceHost -EA SilentlyContinue|%{$_.Id})"; Write-Output "=STARTUPS="; $su|ForEach{Write-Output " $($_.Name): $($_.Command) [$($_.Location)]"}; Write-Output "=WINDOWS="; $wins|ForEach{Write-Output " $($_.Name)[$($_.Id)]: $($_.MainWindowTitle)"}'
PAYLOAD=$(python -c "import json,sys; cmd=sys.argv[1]; print(json.dumps({'command_type':'powershell','command':cmd,'timeout_seconds':30}))" "$DIAG")
CMD_RESP=$(curl -s -X POST "http://172.16.3.30:3001/api/agents/$AGENT_ID/command" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer $TOKEN" \
-d "$PAYLOAD")
echo "$CMD_RESP"
Output: {"command_id":"f165195c-ecdf-4299-8926-c7f128f4210e","status":"running","message":"Command sent to agent"}
sleep 8
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
curl -s "http://172.16.3.30:3001/api/commands/f165195c-ecdf-4299-8926-c7f128f4210e" \
-H "Authorization: Bearer $TOKEN" | python -c "
import sys, json
d = json.load(sys.stdin)
print('Status:', d.get('status'))
print('Output:')
print(d.get('output', d.get('result', '(none)')))
print('Error:', d.get('error', ''))
" 2>/dev/null
Output: Status: running
Output:
(none)
Error:
sleep 15
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
curl -s "http://172.16.3.30:3001/api/commands/f165195c-ecdf-4299-8926-c7f128f4210e" \
-H "Authorization: Bearer $TOKEN" | python -c "
import sys, json
d = json.load(sys.stdin)
print('Status:', d.get('status'))
output = d.get('output', d.get('result', ''))
if output:
print(output)
else:
print('Full response:', json.dumps(d, indent=2))
" 2>/dev/null
Output: Status: failed
Full response: {
"id": "f165195c-ecdf-4299-8926-c7f128f4210e",
"agent_id": "97fe5582-aa3d-4132-94a6-f4c8582bca31",
"command_type": "powershell",
"command_text": "$cad=(Get-ItemProperty "HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" -Name DisableCAD - ... [truncated]
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
AGENT_ID="97fe5582-aa3d-4132-94a6-f4c8582bca31"
# Just the registry key - fast, no WMI
CMD1='$cad=(Get-ItemProperty "HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" -Name DisableCAD -EA SilentlyContinue).DisableCAD; $fk=(Get-ItemProperty "HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" -Name "Flags" -EA SilentlyContinue); $shm=(Get-ItemProperty "HKCU:\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" -EA SilentlyContinue); Write-Output "DisableCAD=$cad"; Write-Output "User=$env:USERNAME ComputerName=$env:COMPUTERNAME"; (Get-ItemProperty "HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon") | Select AutoAdminLogon,DefaultUserName,ForceUnlockLogon,PasswordExpiryWarning | Format-List'
PAYLOAD=$(python -c "import json,sys; print(json.dumps({'command_type':'powershell','command':sys.argv[1],'timeout_seconds':20}))" "$CMD1")
RESP=$(curl -s -X POST "http://172.16.3.30:3001/api/agents/$AGENT_ID/command" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer $TOKEN" \
-d "$PAYLOAD")
echo "CMD1 ID: $(echo $RESP | python -c 'import sys,json; print(json.load(sys.stdin).get("command_id",""))' 2>/dev/null)"
Output: CMD1 ID: 962db19a-3a71-4236-bf35-a18263ff9efc
sleep 10
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
curl -s "http://172.16.3.30:3001/api/commands/962db19a-3a71-4236-bf35-a18263ff9efc" \
-H "Authorization: Bearer $TOKEN" | python -c "
import sys, json
d = json.load(sys.stdin)
print('Status:', d.get('status'))
print('STDOUT:', d.get('stdout',''))
print('STDERR:', d.get('stderr',''))
" 2>/dev/null
Output: Status: completed
STDOUT: DisableCAD=1
User=LS-2$ ComputerName=LS-2
AutoAdminLogon :
DefaultUserName :
ForceUnlockLogon : 0
PasswordExpiryWarning : 5
STDERR:
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
AGENT_ID="97fe5582-aa3d-4132-94a6-f4c8582bca31"
CMD2='$run=Get-ItemProperty "HKLM:\SOFTWARE\Microsoft\Windows\CurrentVersion\Run" -EA SilentlyContinue; $runOnce=Get-ItemProperty "HKLM:\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnce" -EA SilentlyContinue; $run32=Get-ItemProperty "HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows\CurrentVersion\Run" -EA SilentlyContinue; Write-Output "=HKLM Run="; $run.PSObject.Properties|Where{$_.Name -notlike "PS*"}|%{Write-Output " $($_.Name): $($_.Value)"}; Write-Output "=HKLM RunOnce="; $runOnce.PSObject.Properties|Where{$_.Name -notlike "PS*"}|%{Write-Output " $($_.Name): $($_.Value)"}; Write-Output "=HKLM Run32="; $run32.PSObject.Properties|Where{$_.Name -notlike "PS*"}|%{Write-Output " $($_.Name): $($_.Value)"}; Write-Output "=Processes="; Get-Process|Select Name,Id,CPU|Sort CPU -Desc|Select -First 15|%{Write-Output " $($_.Name)[$($_.Id)] CPU=$($_.CPU)"}'
PAYLOAD=$(python -c "import json,sys; print(json.dumps({'command_type':'powershell','command':sys.argv[1],'timeout_seconds':20}))" "$CMD2")
ID2=$(curl -s -X POST "http://172.16.3.30:3001/api/agents/$AGENT_ID/command" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer $TOKEN" \
-d "$PAYLOAD" | python -c 'import sys,json; print(json.load(sys.stdin).get("command_id",""))' 2>/dev/null)
echo "CMD2 ID: $ID2"
Output: CMD2 ID: 9a7073a0-4143-4492-a4f6-827bed346e1c
sleep 12
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
curl -s "http://172.16.3.30:3001/api/commands/9a7073a0-4143-4492-a4f6-827bed346e1c" \
-H "Authorization: Bearer $TOKEN" | python -c "
import sys, json
d = json.load(sys.stdin)
print('Status:', d.get('status'))
print(d.get('stdout','(no stdout)'))
if d.get('stderr'): print('ERR:', d['stderr'])
" 2>/dev/null
Output: Status: completed
=HKLM Run=
SecurityHealth: C:\WINDOWS\system32\SecurityHealthSystray.exe
RtkAudUService: "C:\WINDOWS\System32\DriverStore\FileRepository\realtekservice.inf_amd64_a4555e9b35287491\RtkAudUService64.exe" -background
WavesSvc: "C:\WINDOWS\System32\DriverStore\FileRepositor ... [truncated]
bash D:/vault/scripts/vault.sh search sophos 2>/dev/null
Output: No matches found for: sophos
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
AGENT_ID="97fe5582-aa3d-4132-94a6-f4c8582bca31"
CMD='
# Check tamper protection status and find uninstall strings
$tp = Get-ItemProperty "HKLM:\SOFTWARE\Sophos\Management\Policy\TamperProtection" -EA SilentlyContinue
$tpEnabled = $tp.Enabled
$tpPassword = $tp.Password
# Find all Sophos uninstall entries
$sophos64 = Get-ItemProperty "HKLM:\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\*" -EA SilentlyContinue | Where-Object { $_.DisplayName -like "*Sophos*" } | Select-Object DisplayName, UninstallString, QuietUninstallString
$sophos32 = Get-ItemProperty "HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows\CurrentVersion\Uninstall\*" -EA SilentlyContinue | Where-Object { $_.DisplayName -like "*Sophos*" } | Select-Object DisplayName, UninstallString, QuietUninstallString
# Check for SophosUninstall.exe
$uninstExe = Test-Path "C:\Program Files\Sophos\Sophos Endpoint Agent\SophosUninstall.exe"
$zapExe = Test-Path "C:\Program Files\Sophos\Sophos Endpoint Agent\SophosZap.exe"
Write-Output "=TamperProtection="
Write-Output " Enabled: $tpEnabled"
Write-Output " Password: $tpPassword"
Write-Output "=UninstallStrings="
$sophos64 | ForEach-Object { Write-Output " $($_.DisplayName): $($_.UninstallString)" }
$sophos32 | ForEach-Object { Write-Output " [32] $($_.DisplayName): $($_.UninstallString)" }
Write-Output "=Executables="
Write-Output " SophosUninstall.exe: $uninstExe"
Write-Output " SophosZap.exe: $zapExe"
Write-Output "=SophosPath="
Get-ChildItem "C:\Program Files\Sophos\" -EA SilentlyContinue | Select-Object Name | ForEach-Object { Write-Output " $($_.Name)" }
'
PAYLOAD=$(python -c "import json,sys; print(json.dumps({'command_type':'powershell','command':sys.argv[1],'timeout_seconds':25}))" "$CMD")
ID=$(curl -s -X POST "http://172.16.3.30:3001/api/agents/$AGENT_ID/command" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer $TOKEN" \
-d "$PAYLOAD" | python -c 'import sys,json; print(json.load(sys.stdin).get("command_id",""))' 2>/dev/null)
echo "CMD ID: $ID"
Output: CMD ID: a7a39803-3b1a-4979-b854-da2293ebb9f7
sleep 15
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
curl -s "http://172.16.3.30:3001/api/commands/a7a39803-3b1a-4979-b854-da2293ebb9f7" \
-H "Authorization: Bearer $TOKEN" | python -c "
import sys, json
d = json.load(sys.stdin)
print('Status:', d.get('status'))
print(d.get('stdout','(no output)'))
if d.get('stderr'): print('ERR:', d['stderr'])
" 2>/dev/null
Output: Command was manually backgrounded by user with ID: bjlq2dozi. Output is being written to: C:\Users\guru\AppData\Local\Temp\claude\D--claudetools\5b023e80-29e9-4b73-adc1-a36bc6c46dfd\tasks\bjlq2dozi.output
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
AGENT_ID="97fe5582-aa3d-4132-94a6-f4c8582bca31"
CMD='
# Check all known Sophos tamper protection registry locations
$paths = @(
"HKLM:\SOFTWARE\Sophos\Management\Policy\TamperProtection",
"HKLM:\SOFTWARE\Sophos\SAVService\TamperProtection",
"HKLM:\SOFTWARE\Sophos\Sophos Endpoint Agent\TamperProtection",
"HKLM:\SOFTWARE\Sophos\Remote Management System\TamperProtection",
"HKLM:\SOFTWARE\Sophos\Management\Communications\TamperProtection"
)
foreach ($p in $paths) {
$v = Get-ItemProperty $p -EA SilentlyContinue
if ($v) { Write-Output "FOUND $p"; $v | Format-List }
else { Write-Output "EMPTY $p" }
}
# Check if Central-managed (MCS present = Central-managed)
$mcs = Get-Service "Sophos MCS Agent" -EA SilentlyContinue
$mcscl = Get-Service "Sophos MCS Client" -EA SilentlyContinue
Write-Output "=MCS Agent: $($mcs.Status)"
Write-Output "=MCS Client: $($mcscl.Status)"
# Check Sophos services
Get-Service | Where-Object { $_.DisplayName -like "*Sophos*" } | Select-Object Name, DisplayName, Status | ForEach-Object { Write-Output "$($_.Status) | $($_.DisplayName) | $($_.Name)" }
# Check if TP password is in any SAU config
$cfg = Get-Content "C:\ProgramData\Sophos\AutoUpdate\Config\Smc.cfg" -EA SilentlyContinue | Select-String -Pattern "tamper|password" -CaseSensitive:$false
Write-Output "=SMC Config hits="; $cfg
'
PAYLOAD=$(python -c "import json,sys; print(json.dumps({'command_type':'powershell','command':sys.argv[1],'timeout_seconds':25}))" "$CMD")
ID=$(curl -s -X POST "http://172.16.3.30:3001/api/agents/$AGENT_ID/command" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer $TOKEN" \
-d "$PAYLOAD" | python -c 'import sys,json; print(json.load(sys.stdin).get("command_id",""))' 2>/dev/null)
echo "ID: $ID"
Output: ID: 422e7896-e0a5-453b-a4dd-55a854595705
sleep 18
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
curl -s "http://172.16.3.30:3001/api/commands/422e7896-e0a5-453b-a4dd-55a854595705" \
-H "Authorization: Bearer $TOKEN" | python -c "
import sys, json
d = json.load(sys.stdin)
print('Status:', d.get('status'))
print(d.get('stdout','(no output)'))
if d.get('stderr'): print('ERR:', d['stderr'])
" 2>/dev/null
Output: Status: completed
EMPTY HKLM:\SOFTWARE\Sophos\Management\Policy\TamperProtection
EMPTY HKLM:\SOFTWARE\Sophos\SAVService\TamperProtection
EMPTY HKLM:\SOFTWARE\Sophos\Sophos Endpoint Agent\TamperProtection
EMPTY HKLM:\SOFTWARE\Sophos\Remote Management System\TamperProtection
EMPTY HKLM:\SOFTW ... [truncated]
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
AGENT_ID="97fe5582-aa3d-4132-94a6-f4c8582bca31"
CMD='
$exe = "C:\Program Files\Sophos\Sophos Endpoint Agent\SophosUninstall.exe"
Write-Output "Starting Sophos uninstall at $(Get-Date)"
$p = Start-Process -FilePath $exe -ArgumentList "--nomonitor","--noui" -Wait -PassThru -NoNewWindow
Write-Output "Exit code: $($p.ExitCode)"
Write-Output "Finished at $(Get-Date)"
'
PAYLOAD=$(python -c "import json,sys; print(json.dumps({'command_type':'powershell','command':sys.argv[1],'timeout_seconds':600}))" "$CMD")
ID=$(curl -s -X POST "http://172.16.3.30:3001/api/agents/$AGENT_ID/command" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer $TOKEN" \
-d "$PAYLOAD" | python -c 'import sys,json; d=json.load(sys.stdin); print(d.get("command_id", str(d)))' 2>/dev/null)
echo "Uninstall CMD ID: $ID"
Output: Uninstall CMD ID: 46a96b12-bdc5-4227-9c06-f7fce9185e30
sleep 60
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
curl -s "http://172.16.3.30:3001/api/commands/46a96b12-bdc5-4227-9c06-f7fce9185e30" \
-H "Authorization: Bearer $TOKEN" | python -c "
import sys, json
d = json.load(sys.stdin)
print('Status:', d.get('status'))
print('STDOUT:', d.get('stdout',''))
print('STDERR:', d.get('stderr',''))
" 2>/dev/null
Output: <tool_use_error>Blocked: sleep 60 followed by: TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login"
-H "Content-Type: application/json"
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/nu ... [truncated]
until [ "$(curl -s "http://172.16.3.30:3001/api/commands/46a96b12-bdc5-4227-9c06-f7fce9185e30" \
-H "Authorization: Bearer $(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)" \
| python -c "import sys,json; print(json.load(sys.stdin).get('status',''))" 2>/dev/null)" != "running" ]; do sleep 10; done
echo "done polling"
Output: Command running in background with ID: byrpvwh24. Output is being written to: C:\Users\guru\AppData\Local\Temp\claude\D--claudetools\5b023e80-29e9-4b73-adc1-a36bc6c46dfd\tasks\byrpvwh24.output. You will be notified when it completes. To check interim output, use Read on that file path.
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
curl -s "http://172.16.3.30:3001/api/commands/46a96b12-bdc5-4227-9c06-f7fce9185e30" \
-H "Authorization: Bearer $TOKEN" | python -c "
import sys, json
d = json.load(sys.stdin)
print('Status:', d.get('status'))
print('Exit:', d.get('exit_code'))
print('STDOUT:', d.get('stdout','(none)'))
print('STDERR:', d.get('stderr',''))
" 2>/dev/null
Output: Status: running
Exit: None
STDOUT: None
STDERR: None
until [ "$(curl -s "http://172.16.3.30:3001/api/commands/46a96b12-bdc5-4227-9c06-f7fce9185e30" -H "Authorization: Bearer $(curl -s -X POST 'http://172.16.3.30:3001/api/auth/login' -H 'Content-Type: application/json' -d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c 'import sys,json; print(json.load(sys.stdin)["token"])' 2>/dev/null)" | python -c "import sys,json; print(json.load(sys.stdin).get('status',''))" 2>/dev/null)" != "running" ]; do sleep 15; done; echo "Command finished"
Output: Command running in background with ID: bqtqupx1h. Output is being written to: C:\Users\guru\AppData\Local\Temp\claude\D--claudetools\5b023e80-29e9-4b73-adc1-a36bc6c46dfd\tasks\bqtqupx1h.output. You will be notified when it completes. To check interim output, use Read on that file path.
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
curl -s "http://172.16.3.30:3001/api/commands/46a96b12-bdc5-4227-9c06-f7fce9185e30" \
-H "Authorization: Bearer $TOKEN" | python -c "
import sys, json
d = json.load(sys.stdin)
print('Status:', d.get('status'))
print('Exit code:', d.get('exit_code'))
print('STDOUT:', d.get('stdout','(none)'))
print('STDERR:', d.get('stderr','(none)'))
" 2>/dev/null
Output: Status: running
Exit code: None
STDOUT: None
STDERR: None
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
AGENT_ID="97fe5582-aa3d-4132-94a6-f4c8582bca31"
CMD='
# Remove Datto startup entry
Remove-ItemProperty -Path "HKLM:\SOFTWARE\Microsoft\Windows\CurrentVersion\Run" -Name "DattoCloudContinuity" -EA SilentlyContinue
# Verify it is gone
$check = Get-ItemProperty "HKLM:\SOFTWARE\Microsoft\Windows\CurrentVersion\Run" -Name "DattoCloudContinuity" -EA SilentlyContinue
if ($check) { Write-Output "STILL PRESENT: $($check.DattoCloudContinuity)" }
else { Write-Output "REMOVED: DattoCloudContinuity startup entry gone" }
# Also report what Datto services/processes are running
$dattoSvcs = Get-Service | Where-Object { $_.DisplayName -like "*Datto*" -or $_.Name -like "*Datto*" }
Write-Output "=Datto services="
$dattoSvcs | ForEach-Object { Write-Output " $($_.Status) | $($_.DisplayName) | $($_.Name)" }
'
PAYLOAD=$(python -c "import json,sys; print(json.dumps({'command_type':'powershell','command':sys.argv[1],'timeout_seconds':20}))" "$CMD")
ID=$(curl -s -X POST "http://172.16.3.30:3001/api/agents/$AGENT_ID/command" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer $TOKEN" \
-d "$PAYLOAD" | python -c 'import sys,json; print(json.load(sys.stdin).get("command_id",""))' 2>/dev/null)
echo "ID: $ID"
Output: ID: 4db8cba8-14bd-4d83-9000-da883b67c843
until [ "$(curl -s "http://172.16.3.30:3001/api/commands/4db8cba8-14bd-4d83-9000-da883b67c843" \
-H "Authorization: Bearer $(curl -s -X POST 'http://172.16.3.30:3001/api/auth/login' -H 'Content-Type: application/json' \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c 'import sys,json; print(json.load(sys.stdin)["token"])' 2>/dev/null)" \
| python -c "import sys,json; print(json.load(sys.stdin).get('status','running'))" 2>/dev/null)" != "running" ]; do sleep 5; done
TOKEN=$(curl -s -X POST 'http://172.16.3.30:3001/api/auth/login' -H 'Content-Type: application/json' \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c 'import sys,json; print(json.load(sys.stdin)["token"])' 2>/dev/null)
curl -s "http://172.16.3.30:3001/api/commands/4db8cba8-14bd-4d83-9000-da883b67c843" \
-H "Authorization: Bearer $TOKEN" | python -c "
import sys,json; d=json.load(sys.stdin)
print('Status:', d.get('status'))
print(d.get('stdout',''))
" 2>/dev/null
Output: Status: completed
REMOVED: DattoCloudContinuity startup entry gone
=Datto services=
Running | Datto Cloud Continuity Service | DattoCloudContinuityService
Stopped | DattoProvider | DattoProvider
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
AGENT_ID="97fe5582-aa3d-4132-94a6-f4c8582bca31"
CMD='
# Find ScreenConnect service name (includes a hash in the name)
$sc = Get-Service | Where-Object { $_.Name -like "ScreenConnect*" -or $_.DisplayName -like "ScreenConnect*" }
Write-Output "=ScreenConnect services="
$sc | ForEach-Object { Write-Output " Name: $($_.Name) | Display: $($_.DisplayName) | Status: $($_.Status)" }
# Check if already in SafeBoot\Network
$safePath = "HKLM:\SYSTEM\CurrentControlSet\Control\SafeBoot\Network"
$safeMin = "HKLM:\SYSTEM\CurrentControlSet\Control\SafeBoot\Minimal"
foreach ($svc in $sc) {
$inNetwork = Test-Path "$safePath\$($svc.Name)"
$inMinimal = Test-Path "$safeMin\$($svc.Name)"
Write-Output " $($svc.Name) in SafeBoot\Network: $inNetwork"
Write-Output " $($svc.Name) in SafeBoot\Minimal: $inMinimal"
if (-not $inNetwork) {
New-Item -Path "$safePath\$($svc.Name)" -Force | Out-Null
Set-ItemProperty -Path "$safePath\$($svc.Name)" -Name "(Default)" -Value "Service"
Write-Output " ADDED $($svc.Name) to SafeBoot\Network"
} else {
Write-Output " Already present in SafeBoot\Network - no change needed"
}
}
# Also check GuruRMM agent while we are here
$guru = Get-Service | Where-Object { $_.Name -like "*gururmm*" -or $_.DisplayName -like "*GuruRMM*" }
foreach ($svc in $guru) {
$inNetwork = Test-Path "$safePath\$($svc.Name)"
Write-Output "GuruRMM svc $($svc.Name) in SafeBoot\Network: $inNetwork"
}
'
PAYLOAD=$(python -c "import json,sys; print(json.dumps({'command_type':'powershell','command':sys.argv[1],'timeout_seconds':20}))" "$CMD")
ID=$(curl -s -X POST "http://172.16.3.30:3001/api/agents/$AGENT_ID/command" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer $TOKEN" \
-d "$PAYLOAD" | python -c 'import sys,json; print(json.load(sys.stdin).get("command_id",""))' 2>/dev/null)
echo "ID: $ID"
Output: ID: 53e88680-beaa-490a-832a-39b00db74841
until [ "$(curl -s "http://172.16.3.30:3001/api/commands/53e88680-beaa-490a-832a-39b00db74841" \
-H "Authorization: Bearer $(curl -s -X POST 'http://172.16.3.30:3001/api/auth/login' -H 'Content-Type: application/json' \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c 'import sys,json; print(json.load(sys.stdin)["token"])' 2>/dev/null)" \
| python -c "import sys,json; print(json.load(sys.stdin).get('status','running'))" 2>/dev/null)" != "running" ]; do sleep 5; done
TOKEN=$(curl -s -X POST 'http://172.16.3.30:3001/api/auth/login' -H 'Content-Type: application/json' \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c 'import sys,json; print(json.load(sys.stdin)["token"])' 2>/dev/null)
curl -s "http://172.16.3.30:3001/api/commands/53e88680-beaa-490a-832a-39b00db74841" \
-H "Authorization: Bearer $TOKEN" | python -c "
import sys,json; d=json.load(sys.stdin)
print('Status:', d.get('status'))
print(d.get('stdout',''))
if d.get('stderr'): print('ERR:', d['stderr'])
" 2>/dev/null
Output: Status: completed
=ScreenConnect services=
Name: ScreenConnect Client (1912bf3444b41a08) | Display: ScreenConnect Client (1912bf3444b41a08) | Status: Running
ScreenConnect Client (1912bf3444b41a08) in SafeBoot\Network: False
ScreenConnect Client (1912bf3444b41a08) in SafeBoot\Minimal: F ... [truncated]
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
AGENT_ID="97fe5582-aa3d-4132-94a6-f4c8582bca31"
# Add GuruRMM services to SafeBoot\Network
CMD='
$safePath = "HKLM:\SYSTEM\CurrentControlSet\Control\SafeBoot\Network"
$svcs = @("GuruRMMAgent","GuruRMMWatchdog")
foreach ($svc in $svcs) {
New-Item -Path "$safePath\$svc" -Force | Out-Null
Set-ItemProperty -Path "$safePath\$svc" -Name "(Default)" -Value "Service"
Write-Output "ADDED $svc to SafeBoot\Network"
}
'
PAYLOAD=$(python -c "import json,sys; print(json.dumps({'command_type':'powershell','command':sys.argv[1],'timeout_seconds':15}))" "$CMD")
curl -s -X POST "http://172.16.3.30:3001/api/agents/$AGENT_ID/command" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer $TOKEN" \
-d "$PAYLOAD" | python -c 'import sys,json; d=json.load(sys.stdin); print("GuruRMM SafeBoot cmd:", d.get("command_id",""))' 2>/dev/null
# Check Sophos uninstall status
curl -s "http://172.16.3.30:3001/api/commands/46a96b12-bdc5-4227-9c06-f7fce9185e30" \
-H "Authorization: Bearer $TOKEN" | python -c "
import sys,json; d=json.load(sys.stdin)
print('Sophos uninstall status:', d.get('status'))
print('Exit code:', d.get('exit_code'))
print('STDOUT:', d.get('stdout','(none)'))
print('STDERR:', d.get('stderr',''))
" 2>/dev/null
Output: GuruRMM SafeBoot cmd: 313b6331-f5e6-43f3-8400-6e593f67f87b
Sophos uninstall status: running
Exit code: None
STDOUT: None
STDERR: None
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
curl -s -X POST "http://172.16.3.30:3001/api/commands/46a96b12-bdc5-4227-9c06-f7fce9185e30/cancel" \
-H "Authorization: Bearer $TOKEN" | python -c "import sys,json; print(json.load(sys.stdin))" 2>/dev/null
Output: {'status': 'cancelled', 'message': 'Command cancelled'}
GITEA_TOKEN="9b1da4b79a38ef782268341d25a4b6880572063f"
# Check agent installer / setup code
curl -s "http://172.16.3.20:3000/api/v1/repos/azcomputerguru/gururmm/contents/agent/src" \
-H "Authorization: token $GITEA_TOKEN" | python -c "import sys,json; [print(f['name']) for f in json.load(sys.stdin)]" 2>/dev/null
Output: checks.rs
claude.rs
commands
config.rs
device_id.rs
discovery
embedded.rs
enroll.rs
event_log.rs
install_report.rs
inventory.rs
ipc.rs
log_upload.rs
logging.rs
macos_storage.rs
main.rs
metrics
ohw.rs
powershell.rs
registry.rs
registry_ops
scripts.rs
service.rs
transport
tunne ... [truncated]
GITEA_TOKEN="9b1da4b79a38ef782268341d25a4b6880572063f"
curl -s "http://172.16.3.20:3000/api/v1/repos/azcomputerguru/gururmm/raw/agent/src/service.rs" \
-H "Authorization: token $GITEA_TOKEN" 2>/dev/null | head -120
Output: //! Windows Service implementation for GuruRMM Agent //! //! This module implements the Windows Service Control Manager (SCM) protocol, //! allowing the agent to run as a native Windows service without third-party wrappers.
/// Service name constants shared between the native-service and legacy-ser ... [truncated]
GITEA_TOKEN="9b1da4b79a38ef782268341d25a4b6880572063f"
curl -s "http://172.16.3.20:3000/api/v1/repos/azcomputerguru/gururmm/contents/installer" \
-H "Authorization: token $GITEA_TOKEN" | python -c "import sys,json; [print(f['name']) for f in json.load(sys.stdin)]" 2>/dev/null
Output: //! Windows Service implementation for GuruRMM Agent //! //! This module implements the Windows Service Control Manager (SCM) protocol, //! allowing the agent to run as a native Windows service without third-party wrappers.
/// Service name constants shared between the native-service and legacy-ser ... [truncated]
GITEA_TOKEN="9b1da4b79a38ef782268341d25a4b6880572063f"
curl -s "http://172.16.3.20:3000/api/v1/repos/azcomputerguru/gururmm/raw/agent/src/service.rs" \
-H "Authorization: token $GITEA_TOKEN" 2>/dev/null | grep -n "install\|safe\|boot\|register\|SafeBoot" -i | head -30
Output: 30: pub const INSTALL_DIR: &str = r"C:\Program Files\GuruRMM";
32: pub const INSTALL_DIR: &str = r"C:\Program Files\GuruRMM-Debug";
61: // INSTALL_DIR, CONFIG_DIR) are defined once in the parent constants module
125: // Register the service control handler
126: let status_ha ... [truncated]
GITEA_TOKEN="9b1da4b79a38ef782268341d25a4b6880572063f"
curl -s "http://172.16.3.20:3000/api/v1/repos/azcomputerguru/gururmm/raw/installer/gururmm-agent.wxs" \
-H "Authorization: token $GITEA_TOKEN" 2>/dev/null
Output: 30: pub const INSTALL_DIR: &str = r"C:\Program Files\GuruRMM";
32: pub const INSTALL_DIR: &str = r"C:\Program Files\GuruRMM-Debug";
61: // INSTALL_DIR, CONFIG_DIR) are defined once in the parent constants module
125: // Register the service control handler
126: let status_ha ... [truncated]
cd D:/claudetools/projects/msp-tools/guru-rmm && git add docs/specs/SPEC-015-safeboot-network-registration.md docs/FEATURE_ROADMAP.md && git commit -m "$(cat <<'EOF'
spec: add SPEC-015 Safe Mode Network registration
Automatically write SafeBoot\Network registry keys for GuruRMMAgent and
GuruRMMWatchdog during installation so both services survive a Safe Mode
with Networking reboot. Enables remote command execution during tamper-
protected AV removal workflows without requiring a separate manual step.
- Full implementation details across service.rs and gururmm-agent.wxs
- Cleanup on uninstall via both MSI and script paths
- No server or dashboard changes needed
- Requested by Mike Swanson (2026-05-28)
- Priority: P2 | Effort: Small (~3 hours)
- Added to roadmap under Platform Support > Installation Methods
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
EOF
)" && git push origin main
Output: [main d92850e] spec: add SPEC-015 Safe Mode Network registration
2 files changed, 313 insertions(+)
create mode 100644 docs/specs/SPEC-015-safeboot-network-registration.md
remote: . Processing 1 references
remote: Processed 1 references in total
To http://172.16.3.20:3000/azcompute ... [truncated]
cd D:/claudetools && git add projects/msp-tools/guru-rmm && git commit -m "$(cat <<'EOF'
chore: update guru-rmm submodule (SPEC-015 Safe Mode registration)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
EOF
)" && git push origin main
Output: [main 7c380e2] chore: update guru-rmm submodule (SPEC-015 Safe Mode registration)
1 file changed, 1 insertion(+), 1 deletion(-)
remote: . Processing 1 references
remote: Processed 1 references in total
To http://172.16.3.20:3000/azcomputerguru/claudetools.git
4cee299..7c380e2 ma ... [truncated]
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
curl -s "http://172.16.3.30:3001/api/agents/97fe5582-aa3d-4132-94a6-f4c8582bca31" \
-H "Authorization: Bearer $TOKEN" | python -c "
import sys,json; d=json.load(sys.stdin)
print('Status:', d.get('status'))
print('Last seen:', d.get('last_seen'))
" 2>/dev/null
Output: Status: online
Last seen: 2026-05-28T21:40:31.433342Z
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
AGENT_ID="97fe5582-aa3d-4132-94a6-f4c8582bca31"
CMD='
$svcRoot = "HKLM:\SYSTEM\CurrentControlSet\Services"
$disabled = @()
$skipped = @()
# Find every Sophos entry under Services (covers both services and kernel drivers)
$sophosKeys = Get-ChildItem $svcRoot -EA SilentlyContinue | Where-Object {
$_.PSChildName -like "*Sophos*" -or $_.PSChildName -like "*sntp*" -or
$_.PSChildName -like "*hmpalert*" -or $_.PSChildName -like "*SED*" -or
$_.PSChildName -like "*SAVService*" -or $_.PSChildName -like "*Sophos*"
}
foreach ($key in $sophosKeys) {
try {
$cur = (Get-ItemProperty $key.PSPath -Name Start -EA SilentlyContinue).Start
Set-ItemProperty $key.PSPath -Name Start -Value 4 -EA Stop
$disabled += "$($key.PSChildName) (was $cur)"
} catch {
$skipped += "$($key.PSChildName): $_"
}
}
Write-Output "=DISABLED ($($disabled.Count))="
$disabled | ForEach-Object { Write-Output " $_" }
Write-Output "=SKIPPED ($($skipped.Count))="
$skipped | ForEach-Object { Write-Output " $_" }
Write-Output "=DONE= Reboot to normal mode and run SophosUninstall.exe"
'
PAYLOAD=$(python -c "import json,sys; print(json.dumps({'command_type':'powershell','command':sys.argv[1],'timeout_seconds':30}))" "$CMD")
ID=$(curl -s -X POST "http://172.16.3.30:3001/api/agents/$AGENT_ID/command" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer $TOKEN" \
-d "$PAYLOAD" | python -c 'import sys,json; print(json.load(sys.stdin).get("command_id",""))' 2>/dev/null)
echo "ID: $ID"
Output: ID: e24ed1ed-8154-4994-8155-b35eb5f3f089
until [ "$(curl -s "http://172.16.3.30:3001/api/commands/e24ed1ed-8154-4994-8155-b35eb5f3f089" \
-H "Authorization: Bearer $(curl -s -X POST 'http://172.16.3.30:3001/api/auth/login' \
-H 'Content-Type: application/json' \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' \
| python -c 'import sys,json; print(json.load(sys.stdin)["token"])' 2>/dev/null)" \
| python -c "import sys,json; print(json.load(sys.stdin).get('status','running'))" 2>/dev/null)" != "running" ]
do sleep 5; done
TOKEN=$(curl -s -X POST 'http://172.16.3.30:3001/api/auth/login' -H 'Content-Type: application/json' \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c 'import sys,json; print(json.load(sys.stdin)["token"])' 2>/dev/null)
curl -s "http://172.16.3.30:3001/api/commands/e24ed1ed-8154-4994-8155-b35eb5f3f089" \
-H "Authorization: Bearer $TOKEN" | python -c "
import sys,json; d=json.load(sys.stdin)
print('Status:', d.get('status'))
print(d.get('stdout',''))
if d.get('stderr'): print('ERR:', d['stderr'])
" 2>/dev/null
Output: Status: failed
None
ERR: Command timed out (server-side reaper)
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
AGENT_ID="97fe5582-aa3d-4132-94a6-f4c8582bca31"
# Target every known Sophos service and driver name directly
CMD='
$svcRoot = "HKLM:\SYSTEM\CurrentControlSet\Services"
$names = @(
"SntpService","SEDService","SophosFSService","SophosHealth",
"Sophos MCS Agent","Sophos MCS Client","SophosSystemProtection",
"SophosAutoUpdate","SAVService","SophosSRM","SRService","SSPService",
"SRAgent","ServiceShell","SophosED","sntp","swi_filter","hmpalert",
"sophoslsp","SophosFileScanner","SophosNtpUninstall","SophosAmsi"
)
$r = @()
foreach ($n in $names) {
$p = "$svcRoot\$n"
if (Test-Path $p) {
try {
$old = (Get-ItemProperty $p -Name Start -EA SilentlyContinue).Start
Set-ItemProperty $p -Name Start -Value 4 -EA Stop
$r += " [OK] $n (was $old -> 4/Disabled)"
} catch { $r += " [FAIL] $n : $_" }
}
}
$r | ForEach-Object { Write-Output $_ }
Write-Output "Done."
'
PAYLOAD=$(python -c "import json,sys; print(json.dumps({'command_type':'powershell','command':sys.argv[1],'timeout_seconds':25}))" "$CMD")
ID=$(curl -s -X POST "http://172.16.3.30:3001/api/agents/$AGENT_ID/command" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer $TOKEN" \
-d "$PAYLOAD" | python -c 'import sys,json; print(json.load(sys.stdin).get("command_id",""))' 2>/dev/null)
echo "ID: $ID"
Output: ID: 7baca100-df93-4298-8988-43df34b9c1ef
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
AGENT_ID="97fe5582-aa3d-4132-94a6-f4c8582bca31"
CMD='Get-Content "C:\Users\James\AppData\Local\Temp\SophosZap log.txt" -EA SilentlyContinue | Select-Object -Last 60'
PAYLOAD=$(python -c "import json,sys; print(json.dumps({'command_type':'powershell','command':sys.argv[1],'timeout_seconds':15}))" "$CMD")
LOGID=$(curl -s -X POST "http://172.16.3.30:3001/api/agents/$AGENT_ID/command" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer $TOKEN" \
-d "$PAYLOAD" | python -c 'import sys,json; print(json.load(sys.stdin).get("command_id",""))' 2>/dev/null)
echo "Log cmd ID: $LOGID"
Output: Log cmd ID: 23ca3d22-e875-4d71-83d1-53e23a8e7901
until [ "$(curl -s "http://172.16.3.30:3001/api/commands/23ca3d22-e875-4d71-83d1-53e23a8e7901" \
-H "Authorization: Bearer $(curl -s -X POST 'http://172.16.3.30:3001/api/auth/login' \
-H 'Content-Type: application/json' \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' \
| python -c 'import sys,json; print(json.load(sys.stdin)["token"])' 2>/dev/null)" \
| python -c "import sys,json; print(json.load(sys.stdin).get('status','running'))" 2>/dev/null)" != "running" ]
do sleep 5; done
TOKEN=$(curl -s -X POST 'http://172.16.3.30:3001/api/auth/login' -H 'Content-Type: application/json' \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c 'import sys,json; print(json.load(sys.stdin)["token"])' 2>/dev/null)
# Get both results
echo "=== SOPHOSZAP LOG ==="
curl -s "http://172.16.3.30:3001/api/commands/23ca3d22-e875-4d71-83d1-53e23a8e7901" \
-H "Authorization: Bearer $TOKEN" | python -c "import sys,json; d=json.load(sys.stdin); print(d.get('stdout','(empty)'))" 2>/dev/null
echo "=== DISABLE CMD ==="
curl -s "http://172.16.3.30:3001/api/commands/7baca100-df93-4298-8988-43df34b9c1ef" \
-H "Authorization: Bearer $TOKEN" | python -c "import sys,json; d=json.load(sys.stdin); print('Status:',d.get('status')); print(d.get('stdout','(empty)'))" 2>/dev/null
Output: === SOPHOSZAP LOG === None
=== DISABLE CMD === Status: failed
None
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
AGENT_ID="97fe5582-aa3d-4132-94a6-f4c8582bca31"
# Full details on both commands
for ID in "23ca3d22-e875-4d71-83d1-53e23a8e7901" "7baca100-df93-4298-8988-43df34b9c1ef"; do
echo "--- $ID ---"
curl -s "http://172.16.3.30:3001/api/commands/$ID" \
-H "Authorization: Bearer $TOKEN" | python -c "
import sys,json; d=json.load(sys.stdin)
print('status:', d.get('status'), '| exit:', d.get('exit_code'))
print('stdout:', repr(d.get('stdout','')))
print('stderr:', repr(d.get('stderr','')))
" 2>/dev/null
done
Output: --- 23ca3d22-e875-4d71-83d1-53e23a8e7901 --- status: failed | exit: None
stdout: None
stderr: 'Command timed out (server-side reaper)'
--- 7baca100-df93-4298-8988-43df34b9c1ef --- status: failed | exit: None
stdout: None
stderr: 'Command timed out (server-side reaper)'
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
AGENT_ID="97fe5582-aa3d-4132-94a6-f4c8582bca31"
# Use cmd shell instead of powershell - much faster to spawn in Safe Mode
CMD='dir /s /b C:\Windows\SophosED.sys 2>nul & dir /s /b C:\Windows\hmpalert.sys 2>nul & dir /s /b "C:\Program Files\Sophos\Endpoint Defense\SophosED.sys" 2>nul'
PAYLOAD=$(python -c "import json,sys; print(json.dumps({'command_type':'shell','command':sys.argv[1],'timeout_seconds':20}))" "$CMD")
ID=$(curl -s -X POST "http://172.16.3.30:3001/api/agents/$AGENT_ID/command" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer $TOKEN" \
-d "$PAYLOAD" | python -c 'import sys,json; print(json.load(sys.stdin).get("command_id",""))' 2>/dev/null)
echo "ID: $ID"
Output: ID: 4e36858f-087c-4e28-9c89-729ad391607a
until [ "$(curl -s "http://172.16.3.30:3001/api/commands/4e36858f-087c-4e28-9c89-729ad391607a" \
-H "Authorization: Bearer $(curl -s -X POST 'http://172.16.3.30:3001/api/auth/login' \
-H 'Content-Type: application/json' -d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' \
| python -c 'import sys,json; print(json.load(sys.stdin)["token"])' 2>/dev/null)" \
| python -c "import sys,json; print(json.load(sys.stdin).get('status','running'))" 2>/dev/null)" != "running" ]
do sleep 5; done
TOKEN=$(curl -s -X POST 'http://172.16.3.30:3001/api/auth/login' -H 'Content-Type: application/json' \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c 'import sys,json; print(json.load(sys.stdin)["token"])' 2>/dev/null)
curl -s "http://172.16.3.30:3001/api/commands/4e36858f-087c-4e28-9c89-729ad391607a" \
-H "Authorization: Bearer $TOKEN" | python -c "
import sys,json; d=json.load(sys.stdin)
print('Status:', d.get('status'), '| exit:', d.get('exit_code'))
print(d.get('stdout','(none)'))
if d.get('stderr'): print('ERR:', d['stderr'])
" 2>/dev/null
Output: Status: failed | exit: None
None
ERR: Command timed out (server-side reaper)
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
AGENT_ID="97fe5582-aa3d-4132-94a6-f4c8582bca31"
# PendingFileRenameOperations: processed by smss.exe before ANY driver loads
# Sophos cannot intercept this - it happens before SophosED.sys is initialized
CMD='
$sm = "HKLM:\SYSTEM\CurrentControlSet\Control\Session Manager"
$cur = (Get-ItemProperty $sm -Name PendingFileRenameOperations -EA SilentlyContinue).PendingFileRenameOperations
if (-not $cur) { $cur = @() }
$add = @(
"\??\C:\Windows\System32\drivers\SophosED.sys",
"\??\C:\Windows\System32\drivers\SophosED.sys.bak",
"\??\C:\Windows\System32\drivers\hmpalert.sys",
"\??\C:\Windows\System32\drivers\hmpalert.sys.bak"
)
$new = $cur + $add
Set-ItemProperty $sm -Name PendingFileRenameOperations -Value $new -Type MultiString
Write-Output "Queued. Existing entries: $($cur.Count/2). Added 2 renames."
(Get-ItemProperty $sm -Name PendingFileRenameOperations).PendingFileRenameOperations
'
PAYLOAD=$(python -c "import json,sys; print(json.dumps({'command_type':'powershell','command':sys.argv[1],'timeout_seconds':25}))" "$CMD")
ID=$(curl -s -X POST "http://172.16.3.30:3001/api/agents/$AGENT_ID/command" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer $TOKEN" \
-d "$PAYLOAD" | python -c 'import sys,json; print(json.load(sys.stdin).get("command_id",""))' 2>/dev/null)
echo "ID: $ID"
Output: ID: 90857a8b-15a2-422c-866a-d29c7ad8879e
until [ "$(curl -s "http://172.16.3.30:3001/api/commands/90857a8b-15a2-422c-866a-d29c7ad8879e" \
-H "Authorization: Bearer $(curl -s -X POST 'http://172.16.3.30:3001/api/auth/login' \
-H 'Content-Type: application/json' -d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' \
| python -c 'import sys,json; print(json.load(sys.stdin)["token"])' 2>/dev/null)" \
| python -c "import sys,json; print(json.load(sys.stdin).get('status','running'))" 2>/dev/null)" != "running" ]
do sleep 5; done
TOKEN=$(curl -s -X POST 'http://172.16.3.30:3001/api/auth/login' -H 'Content-Type: application/json' \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c 'import sys,json; print(json.load(sys.stdin)["token"])' 2>/dev/null)
curl -s "http://172.16.3.30:3001/api/commands/90857a8b-15a2-422c-866a-d29c7ad8879e" \
-H "Authorization: Bearer $TOKEN" | python -c "
import sys,json; d=json.load(sys.stdin)
print('Status:', d.get('status'), '| exit:', d.get('exit_code'))
print(d.get('stdout','(none)'))
if d.get('stderr'): print('ERR:', d['stderr'])
" 2>/dev/null
Output: Status: failed | exit: None
None
ERR: Command timed out (server-side reaper)
until [ "$(curl -s "http://172.16.3.30:3001/api/agents/97fe5582-aa3d-4132-94a6-f4c8582bca31" \
-H "Authorization: Bearer $(curl -s -X POST 'http://172.16.3.30:3001/api/auth/login' \
-H 'Content-Type: application/json' -d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' \
| python -c 'import sys,json; print(json.load(sys.stdin)["token"])' 2>/dev/null)" \
| python -c "import sys,json; print(json.load(sys.stdin).get('status','offline'))" 2>/dev/null)" = "online" ]
do sleep 15; done
echo "LS-2 is back online"
Output: Command running in background with ID: bvm1sfzjn. Output is being written to: C:\Users\guru\AppData\Local\Temp\claude\D--claudetools\5b023e80-29e9-4b73-adc1-a36bc6c46dfd\tasks\bvm1sfzjn.output. You will be notified when it completes. To check interim output, use Read on that file path.
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
AGENT_ID="97fe5582-aa3d-4132-94a6-f4c8582bca31"
CMD='
$exe = "C:\Program Files\Sophos\Sophos Endpoint Agent\SophosUninstall.exe"
Write-Output "Starting at $(Get-Date)"
Write-Output "SophosED.sys present: $(Test-Path C:\Windows\System32\drivers\SophosED.sys)"
Write-Output "SophosED.sys.bak present: $(Test-Path C:\Windows\System32\drivers\SophosED.sys.bak)"
$p = Start-Process -FilePath $exe -ArgumentList "--nomonitor","--noui" -Wait -PassThru -NoNewWindow
Write-Output "Exit code: $($p.ExitCode)"
Write-Output "Finished at $(Get-Date)"
'
PAYLOAD=$(python -c "import json,sys; print(json.dumps({'command_type':'powershell','command':sys.argv[1],'timeout_seconds':600}))" "$CMD")
ID=$(curl -s -X POST "http://172.16.3.30:3001/api/agents/$AGENT_ID/command" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer $TOKEN" \
-d "$PAYLOAD" | python -c 'import sys,json; print(json.load(sys.stdin).get("command_id",""))' 2>/dev/null)
echo "Uninstall ID: $ID"
Output: Uninstall ID: 7a826144-96a9-40b6-9ba3-014bb7e69379
until [ "$(curl -s "http://172.16.3.30:3001/api/commands/7a826144-96a9-40b6-9ba3-014bb7e69379" \
-H "Authorization: Bearer $(curl -s -X POST 'http://172.16.3.30:3001/api/auth/login' \
-H 'Content-Type: application/json' -d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' \
| python -c 'import sys,json; print(json.load(sys.stdin)["token"])' 2>/dev/null)" \
| python -c "import sys,json; print(json.load(sys.stdin).get('status','running'))" 2>/dev/null)" != "running" ]
do sleep 20; done
TOKEN=$(curl -s -X POST 'http://172.16.3.30:3001/api/auth/login' -H 'Content-Type: application/json' \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c 'import sys,json; print(json.load(sys.stdin)["token"])' 2>/dev/null)
curl -s "http://172.16.3.30:3001/api/commands/7a826144-96a9-40b6-9ba3-014bb7e69379" \
-H "Authorization: Bearer $TOKEN" | python -c "
import sys,json; d=json.load(sys.stdin)
print('Status:', d.get('status'), '| Exit:', d.get('exit_code'))
print(d.get('stdout','(no output)'))
if d.get('stderr'): print('ERR:', d['stderr'])
" 2>/dev/null
Output: Command running in background with ID: bp4hcfdog. Output is being written to: C:\Users\guru\AppData\Local\Temp\claude\D--claudetools\5b023e80-29e9-4b73-adc1-a36bc6c46dfd\tasks\bp4hcfdog.output. You will be notified when it completes. To check interim output, use Read on that file path.
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
curl -s "http://172.16.3.30:3001/api/agents/97fe5582-aa3d-4132-94a6-f4c8582bca31" \
-H "Authorization: Bearer $TOKEN" | python -c "
import sys,json; d=json.load(sys.stdin)
print('Status:', d.get('status'))
print('Last seen:', d.get('last_seen'))
print('Version:', d.get('agent_version'))
" 2>/dev/null
# Also check the uninstall command status
curl -s "http://172.16.3.30:3001/api/commands/7a826144-96a9-40b6-9ba3-014bb7e69379" \
-H "Authorization: Bearer $TOKEN" | python -c "
import sys,json; d=json.load(sys.stdin)
print('Uninstall cmd status:', d.get('status'), '| exit:', d.get('exit_code'))
print(d.get('stdout',''))
if d.get('stderr'): print('ERR:', d['stderr'])
" 2>/dev/null
Output: Status: online
Last seen: 2026-05-28T21:40:31.433342Z
Version: 0.6.48
Uninstall cmd status: running | exit: None
None
until [ "$(curl -s "http://172.16.3.30:3001/api/agents/97fe5582-aa3d-4132-94a6-f4c8582bca31" \
-H "Authorization: Bearer $(curl -s -X POST 'http://172.16.3.30:3001/api/auth/login' \
-H 'Content-Type: application/json' -d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' \
| python -c 'import sys,json; print(json.load(sys.stdin)["token"])' 2>/dev/null)" \
| python -c "
import sys,json,datetime
d=json.load(sys.stdin)
ls=d.get('last_seen','')
print(d.get('status','?')+'|'+ls)
" 2>/dev/null)" != "$(curl -s "http://172.16.3.30:3001/api/agents/97fe5582-aa3d-4132-94a6-f4c8582bca31" \
-H "Authorization: Bearer $(curl -s -X POST 'http://172.16.3.30:3001/api/auth/login' \
-H 'Content-Type: application/json' -d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' \
| python -c 'import sys,json; print(json.load(sys.stdin)["token"])' 2>/dev/null)" \
| python -c "import sys,json; d=json.load(sys.stdin); print('online|2026-05-28T21:40:31.433342Z')" 2>/dev/null)" ]
do sleep 20; done
echo "Agent updated - new last_seen"
Output: Command running in background with ID: bpsb89456. Output is being written to: C:\Users\guru\AppData\Local\Temp\claude\D--claudetools\5b023e80-29e9-4b73-adc1-a36bc6c46dfd\tasks\bpsb89456.output. You will be notified when it completes. To check interim output, use Read on that file path.
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
AGENT_ID="97fe5582-aa3d-4132-94a6-f4c8582bca31"
# Check uninstall result and verify Sophos is gone
echo "=== UNINSTALL CMD ==="
curl -s "http://172.16.3.30:3001/api/commands/7a826144-96a9-40b6-9ba3-014bb7e69379" \
-H "Authorization: Bearer $TOKEN" | python -c "
import sys,json; d=json.load(sys.stdin)
print('Status:', d.get('status'), '| Exit:', d.get('exit_code'))
print(d.get('stdout','(no output)'))
if d.get('stderr'): print('ERR:', d['stderr'])
" 2>/dev/null
# Verify Sophos services and driver state
CMD='
Write-Output "=SophosED driver="
Write-Output " SophosED.sys: $(Test-Path C:\Windows\System32\drivers\SophosED.sys)"
Write-Output " SophosED.sys.bak: $(Test-Path C:\Windows\System32\drivers\SophosED.sys.bak)"
Write-Output "=Sophos services="
$s = Get-Service | Where-Object { $_.DisplayName -like "*Sophos*" -or $_.Name -like "*Sophos*" }
if ($s) { $s | ForEach-Object { Write-Output " $($_.Status) $($_.Name)" } }
else { Write-Output " None found - Sophos removed!" }
Write-Output "=Sophos programs="
$p = Get-ItemProperty "HKLM:\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\*" -EA SilentlyContinue | Where-Object { $_.DisplayName -like "*Sophos*" }
if ($p) { $p | ForEach-Object { Write-Output " $($_.DisplayName)" } }
else { Write-Output " None found" }
'
PAYLOAD=$(python -c "import json,sys; print(json.dumps({'command_type':'powershell','command':sys.argv[1],'timeout_seconds':25}))" "$CMD")
VID=$(curl -s -X POST "http://172.16.3.30:3001/api/agents/$AGENT_ID/command" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer $TOKEN" \
-d "$PAYLOAD" | python -c 'import sys,json; print(json.load(sys.stdin).get("command_id",""))' 2>/dev/null)
echo "Verify ID: $VID"
Output: === UNINSTALL CMD === Status: running | Exit: None
None
Verify ID: 8b360bb1-552e-4f27-8d80-1d8c861b02f9
until [ "$(curl -s "http://172.16.3.30:3001/api/commands/8b360bb1-552e-4f27-8d80-1d8c861b02f9" \
-H "Authorization: Bearer $(curl -s -X POST 'http://172.16.3.30:3001/api/auth/login' \
-H 'Content-Type: application/json' -d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' \
| python -c 'import sys,json; print(json.load(sys.stdin)["token"])' 2>/dev/null)" \
| python -c "import sys,json; print(json.load(sys.stdin).get('status','running'))" 2>/dev/null)" != "running" ]
do sleep 8; done
TOKEN=$(curl -s -X POST 'http://172.16.3.30:3001/api/auth/login' -H 'Content-Type: application/json' \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c 'import sys,json; print(json.load(sys.stdin)["token"])' 2>/dev/null)
curl -s "http://172.16.3.30:3001/api/commands/8b360bb1-552e-4f27-8d80-1d8c861b02f9" \
-H "Authorization: Bearer $TOKEN" | python -c "
import sys,json; d=json.load(sys.stdin)
print('Status:', d.get('status'), '| Exit:', d.get('exit_code'))
print(d.get('stdout',''))
if d.get('stderr'): print('ERR:', d['stderr'])
" 2>/dev/null
Output: Status: failed | Exit: None
None
ERR: Command timed out (server-side reaper)
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
AGENT_ID="97fe5582-aa3d-4132-94a6-f4c8582bca31"
CMD='dir C:\Windows\System32\drivers\SophosED* 2>nul & sc query SEDService 2>nul | findstr STATE & sc query SntpService 2>nul | findstr STATE & dir "C:\Program Files\Sophos" 2>nul | findstr /c:"File(s)" /c:"Dir(s)"'
PAYLOAD=$(python -c "import json,sys; print(json.dumps({'command_type':'shell','command':sys.argv[1],'timeout_seconds':20}))" "$CMD")
ID=$(curl -s -X POST "http://172.16.3.30:3001/api/agents/$AGENT_ID/command" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer $TOKEN" \
-d "$PAYLOAD" | python -c 'import sys,json; print(json.load(sys.stdin).get("command_id",""))' 2>/dev/null)
echo "ID: $ID"
Output: ID: 28d823a7-4c03-4f89-b8f0-89bb195f7cd2
until [ "$(curl -s "http://172.16.3.30:3001/api/commands/28d823a7-4c03-4f89-b8f0-89bb195f7cd2" \
-H "Authorization: Bearer $(curl -s -X POST 'http://172.16.3.30:3001/api/auth/login' \
-H 'Content-Type: application/json' -d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' \
| python -c 'import sys,json; print(json.load(sys.stdin)["token"])' 2>/dev/null)" \
| python -c "import sys,json; print(json.load(sys.stdin).get('status','running'))" 2>/dev/null)" != "running" ]
do sleep 8; done
TOKEN=$(curl -s -X POST 'http://172.16.3.30:3001/api/auth/login' -H 'Content-Type: application/json' \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c 'import sys,json; print(json.load(sys.stdin)["token"])' 2>/dev/null)
curl -s "http://172.16.3.30:3001/api/commands/28d823a7-4c03-4f89-b8f0-89bb195f7cd2" \
-H "Authorization: Bearer $TOKEN" | python -c "
import sys,json; d=json.load(sys.stdin)
print('Status:', d.get('status'), '| Exit:', d.get('exit_code'))
print(d.get('stdout','(none)'))
if d.get('stderr'): print('ERR:', d['stderr'])
" 2>/dev/null
Output: Status: failed | Exit: None
None
ERR: Command timed out (server-side reaper)
until [ "$(curl -s "http://172.16.3.30:3001/api/commands/7a826144-96a9-40b6-9ba3-014bb7e69379" \
-H "Authorization: Bearer $(curl -s -X POST 'http://172.16.3.30:3001/api/auth/login' \
-H 'Content-Type: application/json' -d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' \
| python -c 'import sys,json; print(json.load(sys.stdin)["token"])' 2>/dev/null)" \
| python -c "import sys,json; print(json.load(sys.stdin).get('status','running'))" 2>/dev/null)" != "running" ]
do sleep 20; done
TOKEN=$(curl -s -X POST 'http://172.16.3.30:3001/api/auth/login' -H 'Content-Type: application/json' \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c 'import sys,json; print(json.load(sys.stdin)["token"])' 2>/dev/null)
curl -s "http://172.16.3.30:3001/api/commands/7a826144-96a9-40b6-9ba3-014bb7e69379" \
-H "Authorization: Bearer $TOKEN" | python -c "
import sys,json; d=json.load(sys.stdin)
print('Status:', d.get('status'), '| Exit:', d.get('exit_code'))
print(d.get('stdout',''))
if d.get('stderr'): print('ERR:', d['stderr'])
" 2>/dev/null
Output: Command running in background with ID: buyb1ak96. Output is being written to: C:\Users\guru\AppData\Local\Temp\claude\D--claudetools\5b023e80-29e9-4b73-adc1-a36bc6c46dfd\tasks\buyb1ak96.output. You will be notified when it completes. To check interim output, use Read on that file path.
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
AGENT_ID="97fe5582-aa3d-4132-94a6-f4c8582bca31"
echo "=== AGENT STATUS ==="
curl -s "http://172.16.3.30:3001/api/agents/$AGENT_ID" \
-H "Authorization: Bearer $TOKEN" | python -c "
import sys,json; d=json.load(sys.stdin)
print('Status:', d.get('status'))
print('Last seen:', d.get('last_seen'))
" 2>/dev/null
echo "=== SOPHOS CHECK ==="
CMD='sc query SEDService 2>&1 & sc query SntpService 2>&1 & dir C:\Windows\System32\drivers\SophosED* 2>&1 & dir "C:\Program Files\Sophos\Sophos Endpoint Agent" 2>&1 | find "File Not Found" & echo CHECK_DONE'
PAYLOAD=$(python -c "import json,sys; print(json.dumps({'command_type':'shell','command':sys.argv[1],'timeout_seconds':20}))" "$CMD")
ID=$(curl -s -X POST "http://172.16.3.30:3001/api/agents/$AGENT_ID/command" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer $TOKEN" \
-d "$PAYLOAD" | python -c 'import sys,json; print(json.load(sys.stdin).get("command_id","ERR"))' 2>/dev/null)
echo "Verify ID: $ID"
Output: === AGENT STATUS === Status: online
Last seen: 2026-05-28T21:40:31.433342Z
=== SOPHOS CHECK === Verify ID: 645b7fbc-b48a-4c43-8f4e-447213a81c95
until [ "$(curl -s "http://172.16.3.30:3001/api/commands/645b7fbc-b48a-4c43-8f4e-447213a81c95" \
-H "Authorization: Bearer $(curl -s -X POST 'http://172.16.3.30:3001/api/auth/login' \
-H 'Content-Type: application/json' -d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' \
| python -c 'import sys,json; print(json.load(sys.stdin)["token"])' 2>/dev/null)" \
| python -c "import sys,json; print(json.load(sys.stdin).get('status','running'))" 2>/dev/null)" != "running" ]
do sleep 8; done
TOKEN=$(curl -s -X POST 'http://172.16.3.30:3001/api/auth/login' -H 'Content-Type: application/json' \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c 'import sys,json; print(json.load(sys.stdin)["token"])' 2>/dev/null)
curl -s "http://172.16.3.30:3001/api/commands/645b7fbc-b48a-4c43-8f4e-447213a81c95" \
-H "Authorization: Bearer $TOKEN" | python -c "
import sys,json; d=json.load(sys.stdin)
print('Status:', d.get('status'), '| Exit:', d.get('exit_code'))
print(d.get('stdout','(none)'))
if d.get('stderr'): print('ERR:', d['stderr'])
" 2>/dev/null
Output: Status: failed | Exit: None
None
ERR: Command timed out (server-side reaper)
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
AGENT_ID="97fe5582-aa3d-4132-94a6-f4c8582bca31"
curl -s "http://172.16.3.30:3001/api/agents/$AGENT_ID" \
-H "Authorization: Bearer $TOKEN" | python -c "
import sys,json; d=json.load(sys.stdin)
print('Status:', d.get('status'), '| Last seen:', d.get('last_seen'))
" 2>/dev/null
CMD='sc query SEDService 2>&1 | findstr /i "STATE FAILED" & sc query SntpService 2>&1 | findstr /i "STATE FAILED" & dir C:\Windows\System32\drivers\SophosED* 2>&1 & dir "C:\Program Files\Sophos" 2>&1'
PAYLOAD=$(python -c "import json,sys; print(json.dumps({'command_type':'shell','command':sys.argv[1],'timeout_seconds':20}))" "$CMD")
ID=$(curl -s -X POST "http://172.16.3.30:3001/api/agents/$AGENT_ID/command" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer $TOKEN" \
-d "$PAYLOAD" | python -c 'import sys,json; print(json.load(sys.stdin).get("command_id",""))' 2>/dev/null)
echo "ID: $ID"
Output: Status: offline | Last seen: 2026-05-28T22:15:34.101659Z
ID: 69612089-f4d0-4d1c-b035-72a683751263
until [ "$(curl -s "http://172.16.3.30:3001/api/agents/97fe5582-aa3d-4132-94a6-f4c8582bca31" \
-H "Authorization: Bearer $(curl -s -X POST 'http://172.16.3.30:3001/api/auth/login' \
-H 'Content-Type: application/json' -d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' \
| python -c 'import sys,json; print(json.load(sys.stdin)["token"])' 2>/dev/null)" \
| python -c "import sys,json; d=json.load(sys.stdin); print(d.get('status','?')+'|'+d.get('last_seen',''))" 2>/dev/null)" \
= "online|2026-05-28T22:15:34.101659Z" ] && \
[ "$(curl -s "http://172.16.3.30:3001/api/agents/97fe5582-aa3d-4132-94a6-f4c8582bca31" \
-H "Authorization: Bearer $(curl -s -X POST 'http://172.16.3.30:3001/api/auth/login' \
-H 'Content-Type: application/json' -d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' \
| python -c 'import sys,json; print(json.load(sys.stdin)["token"])' 2>/dev/null)" \
| python -c "import sys,json; print(json.load(sys.stdin).get('status','?'))" 2>/dev/null)" = "online" ]
do sleep 15; done
TOKEN=$(curl -s -X POST 'http://172.16.3.30:3001/api/auth/login' -H 'Content-Type: application/json' \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c 'import sys,json; print(json.load(sys.stdin)["token"])' 2>/dev/null)
LS=$(curl -s "http://172.16.3.30:3001/api/agents/97fe5582-aa3d-4132-94a6-f4c8582bca31" -H "Authorization: Bearer $TOKEN" | python -c "import sys,json; d=json.load(sys.stdin); print(d.get('status'),'last_seen:',d.get('last_seen'))" 2>/dev/null)
echo "LS-2: $LS"
Output: Command running in background with ID: bhs60u0on. Output is being written to: C:\Users\guru\AppData\Local\Temp\claude\D--claudetools\5b023e80-29e9-4b73-adc1-a36bc6c46dfd\tasks\bhs60u0on.output. You will be notified when it completes. To check interim output, use Read on that file path.
GITEA_TOKEN="9b1da4b79a38ef782268341d25a4b6880572063f"
# Search for VSS, shadow copy, file operation patterns in agent
for term in "shadow" "vss" "file_browser" "restore" "policy" "powershell"; do
result=$(curl -s "http://172.16.3.20:3000/api/v1/repos/azcomputerguru/gururmm/contents/agent/src" \
-H "Authorization: token $GITEA_TOKEN" | python -c "import sys,json; [print(f['name']) for f in json.load(sys.stdin)]" 2>/dev/null | grep -i "$term")
[ -n "$result" ] && echo "$term: $result"
done
# List registry_ops and policies dirs
echo "=registry_ops="
curl -s "http://172.16.3.20:3000/api/v1/repos/azcomputerguru/gururmm/contents/agent/src/registry_ops" \
-H "Authorization: token $GITEA_TOKEN" | python -c "import sys,json; d=json.load(sys.stdin); [print(f['name']) for f in (d if isinstance(d,list) else [])]" 2>/dev/null
echo "=server policies="
curl -s "http://172.16.3.20:3000/api/v1/repos/azcomputerguru/gururmm/contents/server/src/api" \
-H "Authorization: token $GITEA_TOKEN" | python -c "import sys,json; [print(f['name']) for f in json.load(sys.stdin)]" 2>/dev/null | grep -iE "polic|script|file"
Output: powershell: powershell.rs =registry_ops= mod.rs
windows.rs
=server policies= policies.rs policy_checks.rs scripts.rs
GITEA_TOKEN="9b1da4b79a38ef782268341d25a4b6880572063f"
# Check powershell.rs for relay pattern and scripts.rs for execution pattern
curl -s "http://172.16.3.20:3000/api/v1/repos/azcomputerguru/gururmm/raw/agent/src/powershell.rs" \
-H "Authorization: token $GITEA_TOKEN" 2>/dev/null | head -60
Output: powershell: powershell.rs =registry_ops= mod.rs
windows.rs
=server policies= policies.rs policy_checks.rs scripts.rs
cd D:/claudetools/projects/msp-tools/guru-rmm && git add docs/specs/SPEC-016-vss-shadow-copy-management.md docs/FEATURE_ROADMAP.md && git commit -m "$(cat <<'EOF'
spec: add SPEC-016 VSS Shadow Copy Management
Policy-driven VSS snapshot scheduling with dashboard file tree browser
and file/folder restore for Windows agents. Tech can browse and restore
previous versions without RDP or ScreenConnect access.
- PowerShell relay via existing run_ps() for all VSS operations (v1)
- 8 new API endpoints, migration 027 (3 tables: policies/snapshots/restores)
- ShadowCopyTab on Agent Detail with file tree browser + restore dialog
- FileTreeTable component shared with SPEC-013 file browser
- Windows-only with platform stubs for Linux/macOS future work
- Requested by Mike Swanson (2026-05-28)
- Priority: P2 | Effort: Large (~11 days)
- Added roadmap section: Core Agent Features > Volume Shadow Copy
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
EOF
)" && git push origin main
Output: [main 288a992] spec: add SPEC-016 VSS Shadow Copy Management
2 files changed, 501 insertions(+)
create mode 100644 docs/specs/SPEC-016-vss-shadow-copy-management.md
remote: . Processing 1 references
remote: Processed 1 references in total
To http://172.16.3.20:3000/azcomputerguru/g ... [truncated]
cd D:/claudetools && git add projects/msp-tools/guru-rmm && git commit -m "$(cat <<'EOF'
chore: update guru-rmm submodule (SPEC-016 VSS shadow copy management)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
EOF
)" && git push origin main
Output: Exit code 1 [main d109cc4] chore: update guru-rmm submodule (SPEC-016 VSS shadow copy management) 1 file changed, 1 insertion(+), 1 deletion(-) To http://172.16.3.20:3000/azcomputerguru/claudetools.git ! [rejected] main -> main (fetch first) error: failed to push some refs to 'http://172.16 ... [truncated]
cd D:/claudetools && git pull --rebase origin main && git push origin main
Output: From http://172.16.3.20:3000/azcomputerguru/claudetools
- branch main -> FETCH_HEAD
7c380e2..0d616fa main -> origin/main
Rebasing (1/1)
Successfully rebased and updated refs/heads/main.
remote: . Processing 1 references
remote: Processed 1 references in total ... [truncated]
cd D:/claudetools/projects/msp-tools/guru-rmm && git add docs/specs/SPEC-016-vss-shadow-copy-management.md && git commit -m "$(cat <<'EOF'
spec(016): resolve open questions — per-agent policy override + no size limit
Mike Swanson decisions (2026-05-28):
- VSS policy: configurable at site AND agent levels, same as all other
policies. Agent-level overrides site default. Dashboard exposes both.
- Restore size limit: none. Remove 2 GB cap from implementation.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
EOF
)" && git push origin main
Output: [main 4c721a2] spec(016): resolve open questions — per-agent policy override + no size limit
1 file changed, 19 insertions(+), 8 deletions(-)
remote: . Processing 1 references
remote: Processed 1 references in total
To http://172.16.3.20:3000/azcomputerguru/gururmm.git
288a992..4 ... [truncated]
cd D:/claudetools && git add projects/msp-tools/guru-rmm && git commit -m "chore: update guru-rmm submodule (SPEC-016 open questions resolved)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>" && git push origin main
Output: [main 4851467] chore: update guru-rmm submodule (SPEC-016 open questions resolved)
1 file changed, 1 insertion(+), 1 deletion(-)
remote: . Processing 1 references
remote: Processed 1 references in total
To http://172.16.3.20:3000/azcomputerguru/claudetools.git
b3fe2d5..4851467 m ... [truncated]
cd D:/claudetools/projects/msp-tools/guru-rmm && git add docs/specs/SPEC-016-vss-shadow-copy-management.md && git commit -m "$(cat <<'EOF'
spec(016): resolve sync frequency — configurable, default 6h
inventory_sync_hours field added to vss_policies (default 6).
Lightweight count-only on every check-in; full sync on interval.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
EOF
)" && git push origin main && cd D:/claudetools && git add projects/msp-tools/guru-rmm && git commit -m "chore: update guru-rmm submodule (SPEC-016 sync frequency resolved)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>" && git push origin main
Output: [main e8b291f] spec(016): resolve sync frequency — configurable, default 6h
1 file changed, 7 insertions(+), 4 deletions(-)
remote: . Processing 1 references
remote: Processed 1 references in total
To http://172.16.3.20:3000/azcomputerguru/gururmm.git
4c721a2..e8b291f main -> ma ... [truncated]
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
AGENT_ID="97fe5582-aa3d-4132-94a6-f4c8582bca31"
curl -s "http://172.16.3.30:3001/api/agents/$AGENT_ID" \
-H "Authorization: Bearer $TOKEN" | python -c "
import sys,json; d=json.load(sys.stdin)
print('Status:', d.get('status'))
print('Last seen:', d.get('last_seen'))
print('Version:', d.get('agent_version'))
print('OS:', d.get('os_name', d.get('os_version')))
" 2>/dev/null
# Quick Sophos check via cmd
CMD='sc query SEDService 2>&1 & sc query "Sophos MCS Agent" 2>&1 & dir "C:\Program Files\Sophos\Sophos Endpoint Agent\SophosUninstall.exe" 2>&1 & dir C:\Windows\System32\drivers\SophosED* 2>&1'
PAYLOAD=$(python -c "import json,sys; print(json.dumps({'command_type':'shell','command':sys.argv[1],'timeout_seconds':20}))" "$CMD")
ID=$(curl -s -X POST "http://172.16.3.30:3001/api/agents/$AGENT_ID/command" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer $TOKEN" \
-d "$PAYLOAD" | python -c 'import sys,json; print(json.load(sys.stdin).get("command_id",""))' 2>/dev/null)
echo "Check ID: $ID"
Output: Status: offline
Last seen: 2026-05-28T22:15:34.101659Z
Version: 0.6.48
OS: None
Check ID: 7ace3b4e-e054-4e07-8bab-0dea03962e0b
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
curl -s "http://172.16.3.30:3001/api/agents/97fe5582-aa3d-4132-94a6-f4c8582bca31" \
-H "Authorization: Bearer $TOKEN" | python -c "
import sys,json; d=json.load(sys.stdin)
print('Status:', d.get('status'), '| Last seen:', d.get('last_seen'))
" 2>/dev/null
Output: Status: offline | Last seen: 2026-05-28T22:15:34.101659Z
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
# Check original agent
curl -s "http://172.16.3.30:3001/api/agents/97fe5582-aa3d-4132-94a6-f4c8582bca31" \
-H "Authorization: Bearer $TOKEN" | python -c "
import sys,json; d=json.load(sys.stdin)
print('Original LS-2 | Status:', d.get('status'), '| Last seen:', d.get('last_seen'))
" 2>/dev/null
# Check if a new agent appeared in the Lonestar site
curl -s "http://172.16.3.30:3001/api/agents?site_code=WARM-FALCON-5891" \
-H "Authorization: Bearer $TOKEN" 2>/dev/null | python -c "
import sys,json
try:
d=json.load(sys.stdin)
agents = d if isinstance(d, list) else d.get('agents', d.get('data', []))
for a in agents:
print(f\" {a.get('hostname')} | {a.get('status')} | last: {a.get('last_seen')} | id: {a.get('id')}\")
except: print('parse error:', sys.stdin.read()[:200])
" 2>/dev/null
Output: Original LS-2 | Status: online | Last seen: 2026-05-28T23:17:23.622347Z
ACG-DC16 | online | last: 2026-05-28T23:17:41.449184Z | id: 77ddf8a1-52a2-4148-b366-17686eade325
NEPTUNE | online | last: 2026-05-28T23:17:40.686269Z | id: b3a9b454-86eb-491c-ac67-c1f98987d8dc
ix.azcomputerguru.com | on ... [truncated]
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
AGENT_ID="97fe5582-aa3d-4132-94a6-f4c8582bca31"
CMD='sc query SEDService 2>&1 | find "FAILED" & sc query SntpService 2>&1 | find "FAILED" & dir "C:\Program Files\Sophos" 2>&1 & dir C:\Windows\System32\drivers\SophosED* 2>&1 & echo DONE'
PAYLOAD=$(python -c "import json,sys; print(json.dumps({'command_type':'shell','command':sys.argv[1],'timeout_seconds':20}))" "$CMD")
ID=$(curl -s -X POST "http://172.16.3.30:3001/api/agents/$AGENT_ID/command" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer $TOKEN" \
-d "$PAYLOAD" | python -c 'import sys,json; print(json.load(sys.stdin).get("command_id",""))' 2>/dev/null)
until [ "$(curl -s "http://172.16.3.30:3001/api/commands/$ID" \
-H "Authorization: Bearer $TOKEN" \
| python -c "import sys,json; print(json.load(sys.stdin).get('status','running'))" 2>/dev/null)" != "running" ]
do sleep 6; done
curl -s "http://172.16.3.30:3001/api/commands/$ID" \
-H "Authorization: Bearer $TOKEN" | python -c "
import sys,json; d=json.load(sys.stdin)
print('Status:', d.get('status'), '| Exit:', d.get('exit_code'))
print(d.get('stdout','(none)'))
" 2>/dev/null
Output: Status: completed | Exit: 0
The filename, directory name, or volume label syntax is incorrect.
Volume in drive C is OS
Volume Serial Number is 98A8-E05C
Directory of C:\Windows\System32\drivers
07/27/2022 05:43 AM 44,662 SophosED.man
07/13/2023 06:18 AM 2,561 ... [truncated]
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
AGENT_ID="97fe5582-aa3d-4132-94a6-f4c8582bca31"
CMD='echo =SERVICES= & sc query SEDService & sc query SntpService & sc query SRService & sc query SSPService & echo =SOPHOS_DIR= & dir "C:\Program Files\Sophos" & echo =PROGRAMS= & reg query "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall" /s /f Sophos /k 2>&1 | find "Sophos" & echo =DONE='
PAYLOAD=$(python -c "import json,sys; print(json.dumps({'command_type':'shell','command':sys.argv[1],'timeout_seconds':25}))" "$CMD")
ID=$(curl -s -X POST "http://172.16.3.30:3001/api/agents/$AGENT_ID/command" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer $TOKEN" \
-d "$PAYLOAD" | python -c 'import sys,json; print(json.load(sys.stdin).get("command_id",""))' 2>/dev/null)
until [ "$(curl -s "http://172.16.3.30:3001/api/commands/$ID" -H "Authorization: Bearer $TOKEN" \
| python -c "import sys,json; print(json.load(sys.stdin).get('status','running'))" 2>/dev/null)" != "running" ]
do sleep 6; done
curl -s "http://172.16.3.30:3001/api/commands/$ID" -H "Authorization: Bearer $TOKEN" | python -c "
import sys,json; d=json.load(sys.stdin)
print('Exit:', d.get('exit_code'))
print(d.get('stdout','(none)'))
" 2>/dev/null
Output: Exit: 0
=SERVICES=
[SC] EnumQueryServicesStatus:OpenService FAILED 1060:
The specified service does not exist as an installed service.
SERVICE_NAME: SntpService
TYPE : 10 WIN32_OWN_PROCESS
STATE : 4 RUNNING ... [truncated]
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
AGENT_ID="97fe5582-aa3d-4132-94a6-f4c8582bca31"
# Run SophosZap from James's downloads - SEDService is gone so TP check should pass now
CMD='echo Starting SophosZap... & "C:\Users\James\Downloads\SophosZap.exe" --confirm & echo SophosZap exit: %ERRORLEVEL%'
PAYLOAD=$(python -c "import json,sys; print(json.dumps({'command_type':'shell','command':sys.argv[1],'timeout_seconds':300}))" "$CMD")
ID=$(curl -s -X POST "http://172.16.3.30:3001/api/agents/$AGENT_ID/command" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer $TOKEN" \
-d "$PAYLOAD" | python -c 'import sys,json; print(json.load(sys.stdin).get("command_id",""))' 2>/dev/null)
echo "SophosZap cmd ID: $ID"
Output: SophosZap cmd ID: 61fdd5ef-f786-4984-abaa-d77657a13bdb
until [ "$(curl -s "http://172.16.3.30:3001/api/commands/61fdd5ef-f786-4984-abaa-d77657a13bdb" \
-H "Authorization: Bearer $(curl -s -X POST 'http://172.16.3.30:3001/api/auth/login' \
-H 'Content-Type: application/json' -d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' \
| python -c 'import sys,json; print(json.load(sys.stdin)["token"])' 2>/dev/null)" \
| python -c "import sys,json; print(json.load(sys.stdin).get('status','running'))" 2>/dev/null)" != "running" ]
do sleep 15; done
TOKEN=$(curl -s -X POST 'http://172.16.3.30:3001/api/auth/login' -H 'Content-Type: application/json' \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c 'import sys,json; print(json.load(sys.stdin)["token"])' 2>/dev/null)
curl -s "http://172.16.3.30:3001/api/commands/61fdd5ef-f786-4984-abaa-d77657a13bdb" \
-H "Authorization: Bearer $TOKEN" | python -c "
import sys,json; d=json.load(sys.stdin)
print('Status:', d.get('status'), '| Exit:', d.get('exit_code'))
print(d.get('stdout','(none)'))
if d.get('stderr'): print('ERR:', d['stderr'])
" 2>/dev/null
Output: Status: completed | Exit: 0
Starting SophosZap...
SophosZap exit: 0
ERR: '"C:\Users\James\Downloads\SophosZap.exe"' is not recognized as an internal or external command,
operable program or batch file.
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
AGENT_ID="97fe5582-aa3d-4132-94a6-f4c8582bca31"
# Find SophosZap, stop+delete SntpService, and clean up orphaned SophosED.sys
CMD='dir /s /b C:\Users\James\SophosZap.exe 2>nul & dir /s /b C:\Users\James\AppData\Local\Temp\SophosZap* 2>nul | find ".exe" & echo =STOPPING SNTP= & sc stop SntpService & sc delete SntpService & echo =REMOVING ORPHANED FILES= & del /f C:\Windows\System32\drivers\SophosED.sys & del /f C:\Windows\System32\drivers\SophosED.man & echo =RESULT= & sc query SntpService & dir C:\Windows\System32\drivers\SophosED* 2>&1'
PAYLOAD=$(python -c "import json,sys; print(json.dumps({'command_type':'shell','command':sys.argv[1],'timeout_seconds':30}))" "$CMD")
ID=$(curl -s -X POST "http://172.16.3.30:3001/api/agents/$AGENT_ID/command" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer $TOKEN" \
-d "$PAYLOAD" | python -c 'import sys,json; print(json.load(sys.stdin).get("command_id",""))' 2>/dev/null)
until [ "$(curl -s "http://172.16.3.30:3001/api/commands/$ID" -H "Authorization: Bearer $TOKEN" \
| python -c "import sys,json; print(json.load(sys.stdin).get('status','running'))" 2>/dev/null)" != "running" ]
do sleep 8; done
curl -s "http://172.16.3.30:3001/api/commands/$ID" -H "Authorization: Bearer $TOKEN" | python -c "
import sys,json; d=json.load(sys.stdin)
print('Exit:', d.get('exit_code'))
print(d.get('stdout','(none)'))
" 2>/dev/null
Output: Exit: 0
=STOPPING SNTP=
[SC] ControlService FAILED 1052:
The requested control is not valid for this service.
[SC] DeleteService SUCCESS
=REMOVING ORPHANED FILES=
C:\Windows\System32\drivers\SophosED.sys
=RESULT=
SERVICE_NAME: SntpService
TYPE : 10 ... [truncated]
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
AGENT_ID="97fe5582-aa3d-4132-94a6-f4c8582bca31"
# Schedule SophosED.sys deletion at boot, then reboot
CMD='reg add "HKLM\SYSTEM\CurrentControlSet\Control\Session Manager" /v PendingFileRenameOperations /t REG_MULTI_SZ /d "\??\C:\Windows\System32\drivers\SophosED.sys\0\0" /f & shutdown /r /t 10 /c "GuruRMM: Sophos final cleanup reboot"'
PAYLOAD=$(python -c "import json,sys; print(json.dumps({'command_type':'shell','command':sys.argv[1],'timeout_seconds':20}))" "$CMD")
ID=$(curl -s -X POST "http://172.16.3.30:3001/api/agents/$AGENT_ID/command" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer $TOKEN" \
-d "$PAYLOAD" | python -c 'import sys,json; print(json.load(sys.stdin).get("command_id",""))' 2>/dev/null)
echo "Reboot cmd: $ID"
Output: Reboot cmd: 4f89f25c-fb9e-4f85-af09-fa08b46c11a2
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
AGENT_ID="97fe5582-aa3d-4132-94a6-f4c8582bca31"
curl -s "http://172.16.3.30:3001/api/agents/$AGENT_ID" \
-H "Authorization: Bearer $TOKEN" | python -c "
import sys,json; d=json.load(sys.stdin)
print('Status:', d.get('status'), '| Last seen:', d.get('last_seen'))
" 2>/dev/null
# Check safeboot status and clear it, then verify
CMD='bcdedit /enum {current} | find "safeboot" & bcdedit /deletevalue {current} safeboot & echo Cleared. Reboot required to boot normally.'
PAYLOAD=$(python -c "import json,sys; print(json.dumps({'command_type':'shell','command':sys.argv[1],'timeout_seconds':20}))" "$CMD")
ID=$(curl -s -X POST "http://172.16.3.30:3001/api/agents/$AGENT_ID/command" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer $TOKEN" \
-d "$PAYLOAD" | python -c 'import sys,json; print(json.load(sys.stdin).get("command_id",""))' 2>/dev/null)
until [ "$(curl -s "http://172.16.3.30:3001/api/commands/$ID" -H "Authorization: Bearer $TOKEN" \
| python -c "import sys,json; print(json.load(sys.stdin).get('status','running'))" 2>/dev/null)" != "running" ]
do sleep 8; done
curl -s "http://172.16.3.30:3001/api/commands/$ID" -H "Authorization: Bearer $TOKEN" | python -c "
import sys,json; d=json.load(sys.stdin)
print('Exit:', d.get('exit_code'))
print(d.get('stdout',''))
" 2>/dev/null
Output: Status: online | Last seen: 2026-05-28T23:29:12.175669Z
Exit: 0
An error occurred while attempting to delete the specified data element.
Element not found.
Cleared. Reboot required to boot normally.
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
AGENT_ID="97fe5582-aa3d-4132-94a6-f4c8582bca31"
CMD='shutdown /r /t 5 /c "GuruRMM: return to normal boot"'
PAYLOAD=$(python -c "import json,sys; print(json.dumps({'command_type':'shell','command':sys.argv[1],'timeout_seconds':15}))" "$CMD")
curl -s -X POST "http://172.16.3.30:3001/api/agents/$AGENT_ID/command" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer $TOKEN" \
-d "$PAYLOAD" | python -c 'import sys,json; d=json.load(sys.stdin); print(d.get("status",""), d.get("message",""))' 2>/dev/null
Output: running Command sent to agent
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
curl -s "http://172.16.3.30:3001/api/agents?site_code=WARM-FALCON-5891" \
-H "Authorization: Bearer $TOKEN" 2>/dev/null | python -c "
import sys,json
d=json.load(sys.stdin)
agents = d if isinstance(d,list) else d.get('agents', d.get('data',[]))
for a in agents:
if 'LS' in (a.get('hostname','') or ''):
print(a.get('hostname'), '|', a.get('status'), '| last:', a.get('last_seen','')[:19], '| id:', a.get('id'))
" 2>/dev/null
Output: LS-1 | offline | last: 2026-05-28T23:29:04 | id: 6b9617fa-5c77-40e1-8b64-a1545e730895
LS-2 | online | last: 2026-05-28T23:30:12 | id: 97fe5582-aa3d-4132-94a6-f4c8582bca31
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
AGENT_ID="97fe5582-aa3d-4132-94a6-f4c8582bca31"
curl -s "http://172.16.3.30:3001/api/agents/$AGENT_ID" \
-H "Authorization: Bearer $TOKEN" | python -c "
import sys,json; d=json.load(sys.stdin)
print('Status:', d.get('status'), '| Last seen:', d.get('last_seen'))
" 2>/dev/null
CMD='type "C:\Users\James\AppData\Local\Temp\SophosZap log.txt"'
PAYLOAD=$(python -c "import json,sys; print(json.dumps({'command_type':'shell','command':sys.argv[1],'timeout_seconds':15}))" "$CMD")
ID=$(curl -s -X POST "http://172.16.3.30:3001/api/agents/$AGENT_ID/command" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer $TOKEN" \
-d "$PAYLOAD" | python -c 'import sys,json; print(json.load(sys.stdin).get("command_id",""))' 2>/dev/null)
echo "Log ID: $ID"
Output: Status: online | Last seen: 2026-05-28T23:33:41.528559Z
Log ID: 49583763-5f30-4824-81e8-d038fe40161f
until [ "$(curl -s "http://172.16.3.30:3001/api/commands/49583763-5f30-4824-81e8-d038fe40161f" \
-H "Authorization: Bearer $(curl -s -X POST 'http://172.16.3.30:3001/api/auth/login' \
-H 'Content-Type: application/json' -d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' \
| python -c 'import sys,json; print(json.load(sys.stdin)["token"])' 2>/dev/null)" \
| python -c "import sys,json; print(json.load(sys.stdin).get('status','running'))" 2>/dev/null)" != "running" ]
do sleep 6; done
TOKEN=$(curl -s -X POST 'http://172.16.3.30:3001/api/auth/login' -H 'Content-Type: application/json' \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c 'import sys,json; print(json.load(sys.stdin)["token"])' 2>/dev/null)
curl -s "http://172.16.3.30:3001/api/commands/49583763-5f30-4824-81e8-d038fe40161f" \
-H "Authorization: Bearer $TOKEN" | python -c "
import sys,json; d=json.load(sys.stdin)
print('Exit:', d.get('exit_code'))
print(d.get('stdout','(none)'))
" 2>/dev/null
Output: Exit: 1
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
# LS-1 SafeBoot registration — same script we used for LS-2
LS1_ID="6b9617fa-5c77-40e1-8b64-a1545e730895"
CMD='
$safePath = "HKLM:\SYSTEM\CurrentControlSet\Control\SafeBoot\Network"
$sc = Get-Service | Where-Object { $_.Name -like "ScreenConnect*" }
foreach ($svc in $sc) {
New-Item -Path "$safePath\$($svc.Name)" -Force | Out-Null
Set-ItemProperty -Path "$safePath\$($svc.Name)" -Name "(Default)" -Value "Service"
Write-Output "Added ScreenConnect: $($svc.Name)"
}
foreach ($svc in @("GuruRMMAgent","GuruRMMWatchdog")) {
New-Item -Path "$safePath\$svc" -Force | Out-Null
Set-ItemProperty -Path "$safePath\$svc" -Name "(Default)" -Value "Service"
Write-Output "Added GuruRMM: $svc"
}
'
PAYLOAD=$(python -c "import json,sys; print(json.dumps({'command_type':'powershell','command':sys.argv[1],'timeout_seconds':20}))" "$CMD")
ID1=$(curl -s -X POST "http://172.16.3.30:3001/api/agents/$LS1_ID/command" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer $TOKEN" \
-d "$PAYLOAD" | python -c 'import sys,json; print(json.load(sys.stdin).get("command_id",""))' 2>/dev/null)
echo "LS-1 SafeBoot cmd: $ID1"
# LS-2 log search
LS2_ID="97fe5582-aa3d-4132-94a6-f4c8582bca31"
CMD2='dir /s /b "C:\Users\James\AppData\Local\Temp\SophosZap*" 2>nul & dir /s /b "C:\Users\James\AppData\Local\Temp\SophosZap log.txt" 2>nul'
PAYLOAD2=$(python -c "import json,sys; print(json.dumps({'command_type':'shell','command':sys.argv[1],'timeout_seconds':15}))" "$CMD2")
ID2=$(curl -s -X POST "http://172.16.3.30:3001/api/agents/$LS2_ID/command" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer $TOKEN" \
-d "$PAYLOAD2" | python -c 'import sys,json; print(json.load(sys.stdin).get("command_id",""))' 2>/dev/null)
echo "LS-2 log search cmd: $ID2"
Output: LS-1 SafeBoot cmd: b0c7020b-ca02-480c-b058-9dba83159dd1 LS-2 log search cmd: 805b4a9e-ee0d-4955-a1ca-bb1044761064
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
for ID in "b0c7020b-ca02-480c-b058-9dba83159dd1" "805b4a9e-ee0d-4955-a1ca-bb1044761064"; do
until [ "$(curl -s "http://172.16.3.30:3001/api/commands/$ID" -H "Authorization: Bearer $TOKEN" \
| python -c "import sys,json; print(json.load(sys.stdin).get('status','running'))" 2>/dev/null)" != "running" ]
do sleep 6; done
echo "=== $ID ==="
curl -s "http://172.16.3.30:3001/api/commands/$ID" -H "Authorization: Bearer $TOKEN" | python -c "
import sys,json; d=json.load(sys.stdin)
print('Status:', d.get('status'), '| Exit:', d.get('exit_code'))
print(d.get('stdout','(none)'))
if d.get('stderr'): print('ERR:', d['stderr'])
" 2>/dev/null
done
Output: === b0c7020b-ca02-480c-b058-9dba83159dd1 === Status: completed | Exit: 0
Added ScreenConnect: ScreenConnect Client (1912bf3444b41a08)
Added GuruRMM: GuruRMMAgent
Added GuruRMM: GuruRMMWatchdog
=== 805b4a9e-ee0d-4955-a1ca-bb1044761064 === Status: failed | Exit: 1
ERR: The system cannot fi ... [truncated]
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
LS2_ID="97fe5582-aa3d-4132-94a6-f4c8582bca31"
# Search all user temp folders and desktop for SophosZap log
CMD='dir /s /b C:\Users\*SophosZap* 2>nul & dir /s /b C:\Windows\Temp\*SophosZap* 2>nul & dir /s /b C:\Temp\*SophosZap* 2>nul'
PAYLOAD=$(python -c "import json,sys; print(json.dumps({'command_type':'shell','command':sys.argv[1],'timeout_seconds':20}))" "$CMD")
ID=$(curl -s -X POST "http://172.16.3.30:3001/api/agents/$LS2_ID/command" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer $TOKEN" \
-d "$PAYLOAD" | python -c 'import sys,json; print(json.load(sys.stdin).get("command_id",""))' 2>/dev/null)
until [ "$(curl -s "http://172.16.3.30:3001/api/commands/$ID" -H "Authorization: Bearer $TOKEN" \
| python -c "import sys,json; print(json.load(sys.stdin).get('status','running'))" 2>/dev/null)" != "running" ]
do sleep 8; done
curl -s "http://172.16.3.30:3001/api/commands/$ID" -H "Authorization: Bearer $TOKEN" | python -c "
import sys,json; d=json.load(sys.stdin)
print('Exit:', d.get('exit_code'))
print(d.get('stdout','(no output — log not found)'))
" 2>/dev/null
Output: Exit: 1
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
LS2_ID="97fe5582-aa3d-4132-94a6-f4c8582bca31"
# Full Sophos state check + run SophosZap to generate fresh log
CMD='echo =SERVICES= & sc query SntpService 2>&1 | find "STATE" & sc query SEDService 2>&1 | find "1060" & echo =DRIVER= & dir C:\Windows\System32\drivers\SophosED* 2>nul & echo =PROGRAMS DIR= & dir "C:\Program Files\Sophos" 2>nul & echo =RUN SOPHOSZAP= & dir /s /b C:\Users\*SophosZap.exe 2>nul'
PAYLOAD=$(python -c "import json,sys; print(json.dumps({'command_type':'shell','command':sys.argv[1],'timeout_seconds':20}))" "$CMD")
ID=$(curl -s -X POST "http://172.16.3.30:3001/api/agents/$LS2_ID/command" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer $TOKEN" \
-d "$PAYLOAD" | python -c 'import sys,json; print(json.load(sys.stdin).get("command_id",""))' 2>/dev/null)
until [ "$(curl -s "http://172.16.3.30:3001/api/commands/$ID" -H "Authorization: Bearer $TOKEN" \
| python -c "import sys,json; print(json.load(sys.stdin).get('status','running'))" 2>/dev/null)" != "running" ]
do sleep 8; done
curl -s "http://172.16.3.30:3001/api/commands/$ID" -H "Authorization: Bearer $TOKEN" | python -c "
import sys,json; d=json.load(sys.stdin)
print('Exit:', d.get('exit_code'))
print(d.get('stdout','(none)'))
" 2>/dev/null
Output: Exit: 0
=SERVICES=
=DRIVER=
=PROGRAMS DIR=
=RUN SOPHOSZAP=
C:\Users\James\Downloads\SophosZap.exe
C:\Users\James\OneDrive\Desktop\SophosZap.exe
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
LS2_ID="97fe5582-aa3d-4132-94a6-f4c8582bca31"
CMD='"C:\Users\James\OneDrive\Desktop\SophosZap.exe" --confirm & echo ZAPCODE=%ERRORLEVEL% & type "C:\Users\James\AppData\Local\Temp\SophosZap log.txt" 2>nul'
PAYLOAD=$(python -c "import json,sys; print(json.dumps({'command_type':'shell','command':sys.argv[1],'timeout_seconds':300}))" "$CMD")
ID=$(curl -s -X POST "http://172.16.3.30:3001/api/agents/$LS2_ID/command" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer $TOKEN" \
-d "$PAYLOAD" | python -c 'import sys,json; print(json.load(sys.stdin).get("command_id",""))' 2>/dev/null)
echo "SophosZap ID: $ID"
Output: SophosZap ID: 8125742e-8d14-46b3-9850-8e75bccbd1be
until [ "$(curl -s "http://172.16.3.30:3001/api/commands/8125742e-8d14-46b3-9850-8e75bccbd1be" \
-H "Authorization: Bearer $(curl -s -X POST 'http://172.16.3.30:3001/api/auth/login' \
-H 'Content-Type: application/json' -d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' \
| python -c 'import sys,json; print(json.load(sys.stdin)["token"])' 2>/dev/null)" \
| python -c "import sys,json; print(json.load(sys.stdin).get('status','running'))" 2>/dev/null)" != "running" ]
do sleep 15; done
TOKEN=$(curl -s -X POST 'http://172.16.3.30:3001/api/auth/login' -H 'Content-Type: application/json' \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c 'import sys,json; print(json.load(sys.stdin)["token"])' 2>/dev/null)
curl -s "http://172.16.3.30:3001/api/commands/8125742e-8d14-46b3-9850-8e75bccbd1be" \
-H "Authorization: Bearer $TOKEN" | python -c "
import sys,json; d=json.load(sys.stdin)
print('Status:', d.get('status'), '| Exit:', d.get('exit_code'))
print(d.get('stdout','(none)'))
if d.get('stderr'): print('ERR:', d['stderr'])
" 2>/dev/null
Output: Status: failed | Exit: 1
ZAPCODE=0
ERR: '"C:\Users\James\OneDrive\Desktop\SophosZap.exe"' is not recognized as an internal or external command,
operable program or batch file.
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
LS2_ID="97fe5582-aa3d-4132-94a6-f4c8582bca31"
CMD='$p = Start-Process -FilePath "C:\Users\James\Downloads\SophosZap.exe" -ArgumentList "--confirm" -Wait -PassThru -NoNewWindow; Write-Output "Exit: $($p.ExitCode)"; $log = "C:\Users\James\AppData\Local\Temp\SophosZap log.txt"; if (Test-Path $log) { Get-Content $log | Select-Object -Last 30 } else { Write-Output "Log not found at $log" }'
PAYLOAD=$(python -c "import json,sys; print(json.dumps({'command_type':'powershell','command':sys.argv[1],'timeout_seconds':300}))" "$CMD")
ID=$(curl -s -X POST "http://172.16.3.30:3001/api/agents/$LS2_ID/command" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer $TOKEN" \
-d "$PAYLOAD" | python -c 'import sys,json; print(json.load(sys.stdin).get("command_id",""))' 2>/dev/null)
echo "ID: $ID"
Output: ID: c5d33fb5-7343-4ac8-ab98-1fa7a1288e8b
until [ "$(curl -s "http://172.16.3.30:3001/api/commands/c5d33fb5-7343-4ac8-ab98-1fa7a1288e8b" \
-H "Authorization: Bearer $(curl -s -X POST 'http://172.16.3.30:3001/api/auth/login' \
-H 'Content-Type: application/json' -d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' \
| python -c 'import sys,json; print(json.load(sys.stdin)["token"])' 2>/dev/null)" \
| python -c "import sys,json; print(json.load(sys.stdin).get('status','running'))" 2>/dev/null)" != "running" ]
do sleep 15; done
TOKEN=$(curl -s -X POST 'http://172.16.3.30:3001/api/auth/login' -H 'Content-Type: application/json' \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c 'import sys,json; print(json.load(sys.stdin)["token"])' 2>/dev/null)
curl -s "http://172.16.3.30:3001/api/commands/c5d33fb5-7343-4ac8-ab98-1fa7a1288e8b" \
-H "Authorization: Bearer $TOKEN" | python -c "
import sys,json; d=json.load(sys.stdin)
print('Status:', d.get('status'), '| Exit:', d.get('exit_code'))
print(d.get('stdout','(none)'))
if d.get('stderr'): print('ERR:', d['stderr'])
" 2>/dev/null
Output: Status: completed | Exit: 0
SophosZap v1.9.158.0 - Uninstall Sophos Endpoint software
Copyright 1989-2025 Sophos Limited. All rights reserved.
Extracting to temporary folder: C:\WINDOWS\SystemTemp\SophosZap-334337859
Logging to 'C:\WINDOWS\SystemTemp\SophosZap log.txt'
Exit: 1
2026-05- ... [truncated]
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
LS2_ID="97fe5582-aa3d-4132-94a6-f4c8582bca31"
CMD='
$key = "HKLM:\SYSTEM\CurrentControlSet\services\Sophos Endpoint Defense\TamperProtection\Config"
Set-ItemProperty -Path $key -Name "SEDEnabled" -Value 0 -Type DWord -EA Stop
Write-Output "SEDEnabled set to 0"
$v = (Get-ItemProperty $key).SEDEnabled
Write-Output "Verified: SEDEnabled = $v"
$p = Start-Process -FilePath "C:\Users\James\Downloads\SophosZap.exe" -ArgumentList "--confirm" -Wait -PassThru -NoNewWindow
Write-Output "SophosZap exit: $($p.ExitCode)"
$log = "C:\WINDOWS\SystemTemp\SophosZap log.txt"
if (Test-Path $log) { Get-Content $log | Select-Object -Last 20 }
'
PAYLOAD=$(python -c "import json,sys; print(json.dumps({'command_type':'powershell','command':sys.argv[1],'timeout_seconds':300}))" "$CMD")
ID=$(curl -s -X POST "http://172.16.3.30:3001/api/agents/$LS2_ID/command" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer $TOKEN" \
-d "$PAYLOAD" | python -c 'import sys,json; print(json.load(sys.stdin).get("command_id",""))' 2>/dev/null)
echo "ID: $ID"
Output: ID: fd57740f-3f9d-4b77-a2eb-52f61a8e0e25
until [ "$(curl -s "http://172.16.3.30:3001/api/commands/fd57740f-3f9d-4b77-a2eb-52f61a8e0e25" \
-H "Authorization: Bearer $(curl -s -X POST 'http://172.16.3.30:3001/api/auth/login' \
-H 'Content-Type: application/json' -d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' \
| python -c 'import sys,json; print(json.load(sys.stdin)["token"])' 2>/dev/null)" \
| python -c "import sys,json; print(json.load(sys.stdin).get('status','running'))" 2>/dev/null)" != "running" ]
do sleep 15; done
TOKEN=$(curl -s -X POST 'http://172.16.3.30:3001/api/auth/login' -H 'Content-Type: application/json' \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c 'import sys,json; print(json.load(sys.stdin)["token"])' 2>/dev/null)
curl -s "http://172.16.3.30:3001/api/commands/fd57740f-3f9d-4b77-a2eb-52f61a8e0e25" \
-H "Authorization: Bearer $TOKEN" | python -c "
import sys,json; d=json.load(sys.stdin)
print('Status:', d.get('status'), '| Exit:', d.get('exit_code'))
print(d.get('stdout','(none)'))
if d.get('stderr'): print('ERR:', d['stderr'])
" 2>/dev/null
Output: Status: failed | Exit: 1
ERR: Set-ItemProperty : Attempted to perform an unauthorized operation.
At line:3 char:1
-
Set-ItemProperty -Path $key -Name "SEDEnabled" -Value 0 -Type DWord - ...
-
+ CategoryInfo ... [truncated]
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
LS2_ID="97fe5582-aa3d-4132-94a6-f4c8582bca31"
CMD='
# Enable SeTakeOwnership and SeRestore privileges
$code = @"
using System; using System.Runtime.InteropServices;
public class NtPriv {
[DllImport("ntdll.dll")] public static extern int RtlAdjustPrivilege(int p, bool e, bool t, ref bool prev);
}
"@
Add-Type -TypeDefinition $code
$d = $false
[NtPriv]::RtlAdjustPrivilege(9, $true, $false, [ref]$d) | Out-Null # TakeOwnership
[NtPriv]::RtlAdjustPrivilege(18, $true, $false, [ref]$d) | Out-Null # Restore
$path = "SYSTEM\CurrentControlSet\services\Sophos Endpoint Defense\TamperProtection"
$key = [Microsoft.Win32.Registry]::LocalMachine.OpenSubKey($path,
[Microsoft.Win32.RegistryKeyPermissionCheck]::ReadWriteSubTree,
[System.Security.AccessControl.RegistryRights]::TakeOwnership)
$acl = $key.GetAccessControl([System.Security.AccessControl.AccessControlSections]::None)
$acl.SetOwner([System.Security.Principal.NTAccount]"BUILTIN\Administrators")
$key.SetAccessControl($acl)
$acl2 = $key.GetAccessControl()
$rule = New-Object System.Security.AccessControl.RegistryAccessRule(
"BUILTIN\Administrators","FullControl",
"ContainerInherit,ObjectInherit","None","Allow")
$acl2.SetAccessRule($rule)
$key.SetAccessControl($acl2)
$key.Close()
# Now set the value
Set-ItemProperty "HKLM:\SYSTEM\CurrentControlSet\services\Sophos Endpoint Defense\TamperProtection\Config" -Name SEDEnabled -Value 0
Write-Output "SEDEnabled set to 0 - running SophosZap"
$p = Start-Process "C:\Users\James\Downloads\SophosZap.exe" -ArgumentList "--confirm" -Wait -PassThru -NoNewWindow
Write-Output "SophosZap exit: $($p.ExitCode)"
Get-Content "C:\WINDOWS\SystemTemp\SophosZap log.txt" -EA SilentlyContinue | Select-Object -Last 15
'
PAYLOAD=$(python -c "import json,sys; print(json.dumps({'command_type':'powershell','command':sys.argv[1],'timeout_seconds':300}))" "$CMD")
ID=$(curl -s -X POST "http://172.16.3.30:3001/api/agents/$LS2_ID/command" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer $TOKEN" \
-d "$PAYLOAD" | python -c 'import sys,json; print(json.load(sys.stdin).get("command_id",""))' 2>/dev/null)
echo "ID: $ID"
Output: ID: 0a4d587f-162d-402b-9cf2-f39f3448a78f
until [ "$(curl -s "http://172.16.3.30:3001/api/commands/0a4d587f-162d-402b-9cf2-f39f3448a78f" \
-H "Authorization: Bearer $(curl -s -X POST 'http://172.16.3.30:3001/api/auth/login' \
-H 'Content-Type: application/json' -d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' \
| python -c 'import sys,json; print(json.load(sys.stdin)["token"])' 2>/dev/null)" \
| python -c "import sys,json; print(json.load(sys.stdin).get('status','running'))" 2>/dev/null)" != "running" ]
do sleep 15; done
TOKEN=$(curl -s -X POST 'http://172.16.3.30:3001/api/auth/login' -H 'Content-Type: application/json' \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c 'import sys,json; print(json.load(sys.stdin)["token"])' 2>/dev/null)
curl -s "http://172.16.3.30:3001/api/commands/0a4d587f-162d-402b-9cf2-f39f3448a78f" \
-H "Authorization: Bearer $TOKEN" | python -c "
import sys,json; d=json.load(sys.stdin)
print('Status:', d.get('status'), '| Exit:', d.get('exit_code'))
print(d.get('stdout','(none)'))
if d.get('stderr'): print('ERR:', d['stderr'][:500])
" 2>/dev/null
Output: Status: completed | Exit: 0
SEDEnabled set to 0 - running SophosZap
SophosZap v1.9.158.0 - Uninstall Sophos Endpoint software
Copyright 1989-2025 Sophos Limited. All rights reserved.
Extracting to temporary folder: C:\WINDOWS\SystemTemp\SophosZap-2129452823
Logging to 'C:\WINDOWS\SystemT ... [truncated]
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
LS2_ID="97fe5582-aa3d-4132-94a6-f4c8582bca31"
CMD='
# Check the actual ACL on the key
$key = "HKLM:\SYSTEM\CurrentControlSet\services\Sophos Endpoint Defense\TamperProtection"
$acl = Get-Acl $key -EA SilentlyContinue
Write-Output "Owner: $($acl.Owner)"
$acl.Access | ForEach-Object { Write-Output " $($_.IdentityReference) $($_.RegistryRights) $($_.AccessControlType)" }
# Try deleting the whole SED service tree
Write-Output "Attempting key delete..."
reg delete "HKLM\SYSTEM\CurrentControlSet\services\Sophos Endpoint Defense" /f 2>&1
Write-Output "reg delete exit: $LASTEXITCODE"
# Check if still there
if (Test-Path "HKLM:\SYSTEM\CurrentControlSet\services\Sophos Endpoint Defense") {
Write-Output "Key still present"
} else {
Write-Output "Key DELETED - running SophosZap"
$p = Start-Process "C:\Users\James\Downloads\SophosZap.exe" -ArgumentList "--confirm" -Wait -PassThru -NoNewWindow
Write-Output "SophosZap exit: $($p.ExitCode)"
}
'
PAYLOAD=$(python -c "import json,sys; print(json.dumps({'command_type':'powershell','command':sys.argv[1],'timeout_seconds':60}))" "$CMD")
ID=$(curl -s -X POST "http://172.16.3.30:3001/api/agents/$LS2_ID/command" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer $TOKEN" \
-d "$PAYLOAD" | python -c 'import sys,json; print(json.load(sys.stdin).get("command_id",""))' 2>/dev/null)
until [ "$(curl -s "http://172.16.3.30:3001/api/commands/$ID" -H "Authorization: Bearer $TOKEN" \
| python -c "import sys,json; print(json.load(sys.stdin).get('status','running'))" 2>/dev/null)" != "running" ]
do sleep 10; done
curl -s "http://172.16.3.30:3001/api/commands/$ID" -H "Authorization: Bearer $TOKEN" | python -c "
import sys,json; d=json.load(sys.stdin)
print('Status:', d.get('status'), '| Exit:', d.get('exit_code'))
print(d.get('stdout','(none)'))
if d.get('stderr'): print('ERR:', d['stderr'][:300])
" 2>/dev/null
Output: Status: completed | Exit: 0
Owner: BUILTIN\Administrators
BUILTIN\Users ReadKey Allow
BUILTIN\Administrators FullControl Allow
NT AUTHORITY\SYSTEM FullControl Allow
CREATOR OWNER FullControl Allow
APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES ReadKey Allow
S-1-15-3- ... [truncated]
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
LS2_ID="97fe5582-aa3d-4132-94a6-f4c8582bca31"
CMD='
function Show-Acl($path) {
$acl = Get-Acl $path -EA SilentlyContinue
Write-Output "[$path]"
Write-Output " Owner: $($acl.Owner)"
$acl.Access | ForEach-Object { Write-Output " $($_.AccessControlType) $($_.IdentityReference): $($_.RegistryRights)" }
}
Show-Acl "HKLM:\SYSTEM\CurrentControlSet\services\Sophos Endpoint Defense"
Show-Acl "HKLM:\SYSTEM\CurrentControlSet\services\Sophos Endpoint Defense\TamperProtection\Config"
'
PAYLOAD=$(python -c "import json,sys; print(json.dumps({'command_type':'powershell','command':sys.argv[1],'timeout_seconds':20}))" "$CMD")
ID=$(curl -s -X POST "http://172.16.3.30:3001/api/agents/$LS2_ID/command" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer $TOKEN" \
-d "$PAYLOAD" | python -c 'import sys,json; print(json.load(sys.stdin).get("command_id",""))' 2>/dev/null)
until [ "$(curl -s "http://172.16.3.30:3001/api/commands/$ID" -H "Authorization: Bearer $TOKEN" \
| python -c "import sys,json; print(json.load(sys.stdin).get('status','running'))" 2>/dev/null)" != "running" ]
do sleep 8; done
curl -s "http://172.16.3.30:3001/api/commands/$ID" -H "Authorization: Bearer $TOKEN" | python -c "
import sys,json; d=json.load(sys.stdin)
print(d.get('stdout','(none)'))
if d.get('stderr'): print('ERR:', d['stderr'][:400])
" 2>/dev/null
Output: [HKLM:\SYSTEM\CurrentControlSet\services\Sophos Endpoint Defense]
Owner: BUILTIN\Administrators
Allow BUILTIN\Users: ReadKey
Allow BUILTIN\Administrators: FullControl
Allow NT AUTHORITY\SYSTEM: FullControl
Allow CREATOR OWNER: FullControl
Allow APPLICATION PACKAGE AUTHORITY\A ... [truncated]
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
LS2_ID="97fe5582-aa3d-4132-94a6-f4c8582bca31"
CMD='echo =SED SERVICE REG= & reg query "HKLM\SYSTEM\CurrentControlSet\services\Sophos Endpoint Defense" /v Start & reg query "HKLM\SYSTEM\CurrentControlSet\services\Sophos Endpoint Defense" /v ImagePath & echo =SED DRIVER RUNNING= & sc query "Sophos Endpoint Defense" & echo =DRIVER FILE= & dir C:\Windows\System32\drivers\SophosED* & echo =FLTMC= & fltMC filters | findstr /i "sophos"'
PAYLOAD=$(python -c "import json,sys; print(json.dumps({'command_type':'shell','command':sys.argv[1],'timeout_seconds':20}))" "$CMD")
ID=$(curl -s -X POST "http://172.16.3.30:3001/api/agents/$LS2_ID/command" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer $TOKEN" \
-d "$PAYLOAD" | python -c 'import sys,json; print(json.load(sys.stdin).get("command_id",""))' 2>/dev/null)
until [ "$(curl -s "http://172.16.3.30:3001/api/commands/$ID" -H "Authorization: Bearer $TOKEN" \
| python -c "import sys,json; print(json.load(sys.stdin).get('status','running'))" 2>/dev/null)" != "running" ]
do sleep 8; done
curl -s "http://172.16.3.30:3001/api/commands/$ID" -H "Authorization: Bearer $TOKEN" | python -c "
import sys,json; d=json.load(sys.stdin)
print('Exit:', d.get('exit_code'))
print(d.get('stdout','(none)'))
" 2>/dev/null
Output: Exit: 1
=SED SERVICE REG=
=SED DRIVER RUNNING=
ERROR: Invalid Option
DESCRIPTION:
SC is a command line program used for communicating with the
Service Control Manager and services.
USAGE:
sc <server> [command] [service name] <option1> <option2>... ... [truncated]
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
LS2_ID="97fe5582-aa3d-4132-94a6-f4c8582bca31"
CMD='
# Get start type via PowerShell (avoids sc quoting issues)
$svc = Get-ItemProperty "HKLM:\SYSTEM\CurrentControlSet\services\Sophos Endpoint Defense" -EA SilentlyContinue
Write-Output "Start type: $($svc.Start) (0=Boot,1=Sys,2=Auto,3=Demand,4=Disabled)"
Write-Output "ImagePath: $($svc.ImagePath)"
# Try sc config to disable the driver via SCM (different path than direct registry write)
Write-Output "Trying sc config disable..."
& sc.exe config "Sophos Endpoint Defense" start= disabled
Write-Output "sc config exit: $LASTEXITCODE"
# Try deleting the .sys file directly (no Sophos minifilter loaded per fltMC)
Write-Output "Trying direct delete of SophosED.sys..."
& cmd.exe /c "del /f /q C:\Windows\System32\drivers\SophosED.sys 2>&1"
Write-Output "del exit: $LASTEXITCODE"
# Check result
Write-Output "File still present: $(Test-Path C:\Windows\System32\drivers\SophosED.sys)"
# Queue delete via PendingFileRenameOperations as backup (empty string = delete)
$sm = "HKLM:\SYSTEM\CurrentControlSet\Control\Session Manager"
$cur = (Get-ItemProperty $sm -Name PendingFileRenameOperations -EA SilentlyContinue).PendingFileRenameOperations
if (-not $cur) { $cur = @() }
$cur = $cur + @("\??\C:\Windows\System32\drivers\SophosED.sys", "")
Set-ItemProperty $sm -Name PendingFileRenameOperations -Value $cur -Type MultiString -EA SilentlyContinue
Write-Output "PendingFileRenameOperations queued"
'
PAYLOAD=$(python -c "import json,sys; print(json.dumps({'command_type':'powershell','command':sys.argv[1],'timeout_seconds':25}))" "$CMD")
ID=$(curl -s -X POST "http://172.16.3.30:3001/api/agents/$LS2_ID/command" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer $TOKEN" \
-d "$PAYLOAD" | python -c 'import sys,json; print(json.load(sys.stdin).get("command_id",""))' 2>/dev/null)
until [ "$(curl -s "http://172.16.3.30:3001/api/commands/$ID" -H "Authorization: Bearer $TOKEN" \
| python -c "import sys,json; print(json.load(sys.stdin).get('status','running'))" 2>/dev/null)" != "running" ]
do sleep 10; done
curl -s "http://172.16.3.30:3001/api/commands/$ID" -H "Authorization: Bearer $TOKEN" | python -c "
import sys,json; d=json.load(sys.stdin)
print('Status:', d.get('status'), '| Exit:', d.get('exit_code'))
print(d.get('stdout','(none)'))
if d.get('stderr'): print('ERR:', d['stderr'][:300])
" 2>/dev/null
Output: Status: completed | Exit: 0
Start type: 0 (0=Boot,1=Sys,2=Auto,3=Demand,4=Disabled)
ImagePath: system32\DRIVERS\SophosED.sys
Trying sc config disable...
[SC] ChangeServiceConfig FAILED 5:
Access is denied.
sc config exit: 5
Trying direct delete of SophosED.sys...
C:\Windows\Sys ... [truncated]
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
LS2_ID="97fe5582-aa3d-4132-94a6-f4c8582bca31"
# Check WinRE status then reboot to Advanced Options (WinRE)
CMD='reagentc /info & shutdown /r /o /t 15 /c "GuruRMM: booting to WinRE for Sophos driver removal"'
PAYLOAD=$(python -c "import json,sys; print(json.dumps({'command_type':'shell','command':sys.argv[1],'timeout_seconds':20}))" "$CMD")
ID=$(curl -s -X POST "http://172.16.3.30:3001/api/agents/$LS2_ID/command" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer $TOKEN" \
-d "$PAYLOAD" | python -c 'import sys,json; print(json.load(sys.stdin).get("command_id",""))' 2>/dev/null)
until [ "$(curl -s "http://172.16.3.30:3001/api/commands/$ID" -H "Authorization: Bearer $TOKEN" \
| python -c "import sys,json; print(json.load(sys.stdin).get('status','running'))" 2>/dev/null)" != "running" ]
do sleep 6; done
curl -s "http://172.16.3.30:3001/api/commands/$ID" -H "Authorization: Bearer $TOKEN" | python -c "
import sys,json; d=json.load(sys.stdin)
print('Exit:', d.get('exit_code'))
print(d.get('stdout',''))
" 2>/dev/null
Output: Exit: 1
Windows Recovery Environment (Windows RE) and system reset configuration
Information:
Windows RE status: Enabled
Windows RE location: \\?\GLOBALROOT\device\harddisk0\partition4\Recovery\WindowsRE
Boot Configuration Data (BCD) identifier: a837375f-4815-11 ... [truncated]
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
LS2_ID="97fe5582-aa3d-4132-94a6-f4c8582bca31"
CMD='reagentc /boottore & echo reagentc exit: %ERRORLEVEL% & shutdown /r /t 10'
PAYLOAD=$(python -c "import json,sys; print(json.dumps({'command_type':'shell','command':sys.argv[1],'timeout_seconds':20}))" "$CMD")
ID=$(curl -s -X POST "http://172.16.3.30:3001/api/agents/$LS2_ID/command" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer $TOKEN" \
-d "$PAYLOAD" | python -c 'import sys,json; print(json.load(sys.stdin).get("command_id",""))' 2>/dev/null)
until [ "$(curl -s "http://172.16.3.30:3001/api/commands/$ID" -H "Authorization: Bearer $TOKEN" \
| python -c "import sys,json; print(json.load(sys.stdin).get('status','running'))" 2>/dev/null)" != "running" ]
do sleep 6; done
curl -s "http://172.16.3.30:3001/api/commands/$ID" -H "Authorization: Bearer $TOKEN" | python -c "
import sys,json; d=json.load(sys.stdin)
print('Status:', d.get('status'), '| Exit:', d.get('exit_code'))
print(d.get('stdout',''))
" 2>/dev/null
Output: Status: completed | Exit: 0
REAGENTC.EXE: Operation Successful.
reagentc exit: 0
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
LS1_ID="6b9617fa-5c77-40e1-8b64-a1545e730895"
curl -s "http://172.16.3.30:3001/api/agents/$LS1_ID" \
-H "Authorization: Bearer $TOKEN" | python -c "
import sys,json; d=json.load(sys.stdin)
print('Status:', d.get('status'), '| Last seen:', d.get('last_seen'))
" 2>/dev/null
CMD='reagentc /info & reagentc /boottore & echo reagentc exit: %ERRORLEVEL% & shutdown /r /t 10'
PAYLOAD=$(python -c "import json,sys; print(json.dumps({'command_type':'shell','command':sys.argv[1],'timeout_seconds':20}))" "$CMD")
ID=$(curl -s -X POST "http://172.16.3.30:3001/api/agents/$LS1_ID/command" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer $TOKEN" \
-d "$PAYLOAD" | python -c 'import sys,json; print(json.load(sys.stdin).get("command_id",""))' 2>/dev/null)
echo "LS-1 WinRE cmd: $ID"
Output: Status: online | Last seen: 2026-05-28T23:49:19.987713Z
LS-1 WinRE cmd: eeb5e559-a4cb-4f30-b673-ae46b7ab8d68
until [ "$(curl -s "http://172.16.3.30:3001/api/commands/eeb5e559-a4cb-4f30-b673-ae46b7ab8d68" \
-H "Authorization: Bearer $(curl -s -X POST 'http://172.16.3.30:3001/api/auth/login' \
-H 'Content-Type: application/json' -d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' \
| python -c 'import sys,json; print(json.load(sys.stdin)["token"])' 2>/dev/null)" \
| python -c "import sys,json; print(json.load(sys.stdin).get('status','running'))" 2>/dev/null)" != "running" ]
do sleep 6; done
TOKEN=$(curl -s -X POST 'http://172.16.3.30:3001/api/auth/login' -H 'Content-Type: application/json' \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c 'import sys,json; print(json.load(sys.stdin)["token"])' 2>/dev/null)
curl -s "http://172.16.3.30:3001/api/commands/eeb5e559-a4cb-4f30-b673-ae46b7ab8d68" \
-H "Authorization: Bearer $TOKEN" | python -c "
import sys,json; d=json.load(sys.stdin)
print('Status:', d.get('status'), '| Exit:', d.get('exit_code'))
print(d.get('stdout','(none)'))
" 2>/dev/null
Output: Status: completed | Exit: 0
Windows Recovery Environment (Windows RE) and system reset configuration
Information:
Windows RE status: Enabled
Windows RE location: \\?\GLOBALROOT\device\harddisk1\partition4\Recovery\WindowsRE
Boot Configuration Data (BCD) identifi ... [truncated]
# Download SystemRescue and Ventoy in parallel
$dlDir = "D:\Downloads\RecoveryUSB"
New-Item -ItemType Directory -Path $dlDir -Force | Out-Null
$jobs = @(
Start-Job -ScriptBlock {
$url = "https://sourceforge.net/projects/systemrescuecd/files/sysresccd-x86/11.03/systemrescue-11.03-amd64.iso/download"
$out = "D:\Downloads\RecoveryUSB\systemrescue-11.03-amd64.iso"
(New-Object System.Net.WebClient).DownloadFile($url, $out)
Write-Output "SystemRescue done: $out"
}
Start-Job -ScriptBlock {
$url = "https://github.com/ventoy/Ventoy/releases/download/v1.0.99/ventoy-1.0.99-windows.zip"
$out = "D:\Downloads\RecoveryUSB\ventoy.zip"
(New-Object System.Net.WebClient).DownloadFile($url, $out)
Expand-Archive $out "D:\Downloads\RecoveryUSB\ventoy" -Force
Write-Output "Ventoy done"
}
)
Write-Host "Downloads started (job IDs: $($jobs.Id -join ', ')). Check status with Get-Job"
Output: Downloads started (job IDs: 1, 3). Check status with Get-Job
New-Item -ItemType Directory -Path "D:\Downloads\RecoveryUSB\usb-data\scripts" -Force | Out-Null
New-Item -ItemType Directory -Path "D:\Downloads\RecoveryUSB\usb-data\claudetools" -Force | Out-Null
Output: (PowerShell completed with no output)
$dlDir = "D:\Downloads\RecoveryUSB"
# Extract Ventoy
Expand-Archive "$dlDir\ventoy.zip" "$dlDir\ventoy" -Force
$v2d = Get-ChildItem "$dlDir\ventoy" -Filter "Ventoy2Disk.exe" -Recurse | Select-Object -First 1
Write-Host "Ventoy2Disk found: $($v2d.FullName)"
# Start SystemRescue ISO download in background (large file)
Write-Host "`nStarting SystemRescue ISO download (~800MB)..."
$isoPath = "$dlDir\systemrescue.iso"
Remove-Item $isoPath -EA SilentlyContinue
Start-Process -FilePath "curl.exe" -ArgumentList "-L -f -# -o `"$isoPath`" https://fastly-cdn.system-rescue.org/releases/11.03/systemrescue-11.03-amd64.iso" -WindowStyle Hidden
Write-Host "ISO downloading in background. Check size: (Get-Item '$isoPath').Length"
Output: Ventoy2Disk found: D:\Downloads\RecoveryUSB\ventoy\ventoy-1.0.99\Ventoy2Disk.exe
Starting SystemRescue ISO download (~800MB)... ISO downloading in background. Check size: (Get-Item 'D:\Downloads\RecoveryUSB\systemrescue.iso').Length
curl -s -X POST http://172.16.3.30:8001/api/coord/messages \
-H "Content-Type: application/json" \
-d '{
"from_session": "GURU-5070/claude-main",
"to_session": "ALL_SESSIONS",
"project_key": "clients/lonestar-electrical",
"subject": "WinRE Commands - LS-1 and LS-2 Sophos Removal",
"body": "Both LS-1 and LS-2 are in WinRE now. Same commands for both machines:\n\n1. Troubleshoot -> Advanced Options -> Command Prompt\n\n2. Find the Windows drive (C: in WinRE is usually the recovery partition - look for the one with a Windows folder):\n dir C:\\\n dir D:\\\n dir E:\\\n\n3. Run these (substitute correct letter for D:):\n\n del /f D:\\Windows\\System32\\drivers\\SophosED.sys\n reg load HKLM\\TEMPSYS D:\\Windows\\System32\\config\\SYSTEM\n reg add \"HKLM\\TEMPSYS\\CurrentControlSet\\services\\Sophos Endpoint Defense\" /v Start /t REG_DWORD /d 4 /f\n reg unload HKLM\\TEMPSYS\n exit\n\n4. Machine reboots to Windows normally.\n\n5. After reboot - run SophosZap.exe --confirm from Downloads/Desktop\n (Now passes the TP check since SophosED.sys is gone and Start=4)\n\nUSB STICK STATUS: Ventoy flashed to E:, scripts copied, ISO downloading (~780MB, ~3 min remaining). Will be ready before you arrive.\n\nScript location on USB after boot: bash /media/*/claudetools-data/scripts/remove-sophos.sh"
}' | python -c "import sys,json; d=json.load(sys.stdin); print('Message ID:', d.get('id'), '| Status:', d.get('status','sent'))" 2>/dev/null
Output: Message ID: None | Status: sent
curl -s http://172.16.3.30:8001/api/coord/messages | python -c "
import sys,json
msgs = json.load(sys.stdin)
msgs = msgs if isinstance(msgs,list) else msgs.get('messages',[])
for m in msgs[-3:]:
print('ID:', m.get('id'), '| Subject:', m.get('subject'), '| From:', m.get('from_session'))
" 2>/dev/null
Output: ID: c60efc86-a7e3-41fd-8ca7-d63ff998fa5c | Subject: Starting Remote Registry feature | From: Mikes-MacBook-Air/claude-main
ID: 7e90e55a-3202-4344-8136-2935bb70e94c | Subject: Coordination test | From: Mikes-MacBook-Air/claude-main
ID: 5c05ae42-655f-449a-a6e7-c77d9886e8e7 | Subject: ACTION FOR CLAU ... [truncated]
curl -s -X POST http://172.16.3.30:8001/api/coord/messages \
-H "Content-Type: application/json" \
-d '{
"from_session": "GURU-5070/claude-main",
"to_session": "Mikes-MacBook-Air/claude-main",
"project_key": "clients/lonestar-electrical",
"subject": "WinRE Commands - LS-1 and LS-2 Sophos Removal",
"body": "Both machines are in WinRE. Same steps for each:\n\n1. Troubleshoot -> Advanced Options -> Command Prompt\n\n2. Find Windows drive:\n dir C:\\ & dir D:\\ & dir E:\\\n (Look for the one with a Windows folder - NOT the 600MB recovery partition)\n\n3. Run (replace D: with actual drive letter):\n del /f D:\\Windows\\System32\\drivers\\SophosED.sys\n reg load HKLM\\TEMPSYS D:\\Windows\\System32\\config\\SYSTEM\n reg add \"HKLM\\TEMPSYS\\CurrentControlSet\\services\\Sophos Endpoint Defense\" /v Start /t REG_DWORD /d 4 /f\n reg unload HKLM\\TEMPSYS\n exit\n\n4. Windows boots normally - SophosED.sys gone, Start=4 (disabled)\n5. Run SophosZap --confirm from Downloads - now passes TP check\n\nUSB: Ventoy live on E:, scripts ready, ISO ~75% done (~2 min left)"
}' 2>/dev/null
Output: {"error":"Request validation failed","details":{"validation_errors":[{"field":"body.367","message":"JSON decode error","type":"json_invalid"}]},"path":"/api/coord/messages"}
MSG=$(python -c "
import json
body = '''Both machines are in WinRE. Same steps for each:
1. Troubleshoot -> Advanced Options -> Command Prompt
2. Find Windows drive (NOT the 600MB recovery partition):
dir C:\\ & dir D:\\ & dir E:\\
3. Replace D: with actual Windows drive letter and run:
del /f D:\\Windows\\System32\\drivers\\SophosED.sys
reg load HKLM\\TEMPSYS D:\\Windows\\System32\\config\\SYSTEM
reg add \"HKLM\\TEMPSYS\\CurrentControlSet\\services\\Sophos Endpoint Defense\" /v Start /t REG_DWORD /d 4 /f
reg unload HKLM\\TEMPSYS
exit
4. Reboots normally. SophosED.sys gone, SED Start=4 (disabled).
5. Run SophosZap.exe --confirm from Downloads - now clears TP check.
USB: Ventoy flashed to E:, scripts at claudetools-data/scripts/. ISO finishing now.'''
print(json.dumps({
'from_session': 'GURU-5070/claude-main',
'to_session': 'Mikes-MacBook-Air/claude-main',
'project_key': 'clients/lonestar-electrical',
'subject': 'WinRE Commands - LS-1 and LS-2 Sophos Removal',
'body': body
}))
")
curl -s -X POST http://172.16.3.30:8001/api/coord/messages \
-H "Content-Type: application/json" \
-d "$MSG" | python -c "import sys,json; d=json.load(sys.stdin); print(d)" 2>/dev/null
Output: :8: SyntaxWarning: "\ " is an invalid escape sequence. Such sequences will not work in the future. Did you mean "\ "? A raw string is also an option.
{'id': '8a5cb25c-81ea-49a9-a08c-e9288fb981de', 'from_session': 'GURU-5070/claude-main', 'to_session': 'Mikes-MacBook-Air/claude-main', 'proj ... [truncated]
IDENTITY_PATH="D:/claudetools/.claude/identity.json"
REPO_ROOT=$(jq -r '.claudetools_root' "$IDENTITY_PATH")
API_KEY="T259810e5c9917386b-52c2aeea7cdb5ff41c6685a73cebbeb3"
BASE="https://computerguru.syncromsp.com/api/v1"
curl -s "${BASE}/customers?query=lonestar&per_page=10&api_key=${API_KEY}" | \
tr -d '\000-\037' | jq '[.customers[] | {id, business_name, email}]' 2>/dev/null
Output: [
{
"id": 33809612,
"business_name": "Lone Star Electrical Systems LLC",
"email": "robine@lonestarelectrical.net"
}
]
IDENTITY_PATH="D:/claudetools/.claude/identity.json"
REPO_ROOT=$(jq -r '.claudetools_root' "$IDENTITY_PATH")
OLLAMA=$(jq -r '.ollama.endpoint // empty' "$IDENTITY_PATH")
PYTHON=$(jq -r '.python.command // "py"' "$IDENTITY_PATH")
mkdir -p "$REPO_ROOT/.claude/tmp"
cat > "$REPO_ROOT/.claude/tmp/ollama_prompt.txt" << 'ENDPROMPT'
You are a Syncro PSA tech assistant. Draft a ticket description and initial comment for the following work.
CUSTOMER: Lone Star Electrical Systems LLC
SUBJECT: Sophos Endpoint Removal - LS-1 and LS-2
TECH: Mike Swanson
WORK DONE:
Two newly added Windows 11 machines (LS-1 and LS-2) at the Norris site. Both had Sophos Endpoint Protection installed by the previous MSP, managed via Sophos Central (previous MSP's account - no access available). Tamper protection is enforced by the SophosED.sys kernel boot driver (Start type = 0).
LS-2 presented with: mouse clicks unresponsive on desktop until Ctrl+Alt+Del pressed, and Start menu right-click not working. Root cause identified as Sophos shell extensions + Datto Cloud Continuity /pop startup entry competing during logon.
Work performed on both machines:
- Enrolled LS-1 and LS-2 in GuruRMM for remote management
- Removed Datto Cloud Continuity startup registry entry (LS-2)
- Registered ScreenConnect and GuruRMM agent for Safe Mode (SafeBoot\Network registry keys) on both machines
- Multiple Sophos removal attempts: SophosZap blocked by tamper protection, SophosUninstall.exe partially ran (removed most user-mode components), PendingFileRenameOperations delete failed (SophosED.sys loads before smss.exe as a boot driver), sc config blocked by kernel callback, ACL reset blocked by kernel-level protection
- MCS Agent/Client disabled, SntpService registration removed
- Both machines booted to WinRE in preparation for offline driver removal
Current state: SophosED.sys kernel boot driver still present and active on both machines. Most user-mode Sophos services removed from LS-2. Follow-up required to complete removal.
FOLLOW-UP PLAN:
Boot each machine into WinRE, open command prompt, delete SophosED.sys from the offline Windows partition, set SED service Start=4 in the offline SYSTEM registry hive, reboot to Windows, then run SophosZap --confirm to clean remaining registry entries. Scheduled for early next week.
Rules:
- Use <br> for line breaks. Do NOT use <ul> or <li>.
- Professional and factual. No filler phrases.
- Keep the initial_issue focused on symptoms, findings, and work done.
- Keep next_steps concise - what needs to happen next.
Return ONLY valid JSON, no prose before or after:
{
"initial_issue": "<HTML body with <br> line breaks>",
"preview": "<2-3 sentence plain-text summary>"
}
ENDPROMPT
PROMPT_FILE="$REPO_ROOT/.claude/tmp/ollama_prompt.txt"
DRAFT=$($PYTHON -c "
import os, urllib.request, json, sys
prompt = open(os.environ['PROMPT_FILE']).read()
body = json.dumps({
'model': 'qwen3:14b',
'messages': [{'role': 'user', 'content': prompt}],
'stream': False,
'think': False
}).encode()
res = json.loads(urllib.request.urlopen(
urllib.request.Request('$OLLAMA/api/chat', body), timeout=90
).read())
print(res['message']['content'])
" 2>/dev/null)
echo "$DRAFT"
Output: (Bash completed with no output)
TOKEN=$(curl -s -X POST "http://172.16.3.30:3001/api/auth/login" \
-H "Content-Type: application/json" \
-d '{"email":"admin@azcomputerguru.com","password":"GuruRMM2025"}' | python -c "import sys,json; print(json.load(sys.stdin)['token'])" 2>/dev/null)
# Rename site from Norris to Warren
RESP=$(curl -s -X PUT "http://172.16.3.30:3001/api/sites/8146db49-cc9d-41b3-b8e6-972bf074510b" \
-H "Content-Type: application/json" \
-H "Authorization: Bearer $TOKEN" \
-d '{"name":"Warren"}')
echo "RMM rename: $(echo $RESP | python -c "import sys,json; d=json.load(sys.stdin); print(d.get('name', d))" 2>/dev/null)"
Output: RMM rename: Warren
IDENTITY_PATH="D:/claudetools/.claude/identity.json"
REPO_ROOT=$(jq -r '.claudetools_root' "$IDENTITY_PATH")
API_KEY="T259810e5c9917386b-52c2aeea7cdb5ff41c6685a73cebbeb3"
BASE="https://computerguru.syncromsp.com/api/v1"
CUST_ID=33809612
RESP=$(curl -s -X POST "${BASE}/tickets?api_key=${API_KEY}" \
-H "Content-Type: application/json" \
--data-binary @- <<'JSON'
{
"customer_id": 33809612,
"subject": "Sophos Endpoint Removal - LS-1 and LS-2",
"problem_type": "Software",
"status": "New",
"priority": "2 Normal",
"user_id": 1735
}
JSON
)
TICKET_ID=$(echo "$RESP" | tr -d '\000-\037' | jq -r '.ticket.id')
TICKET_NUM=$(echo "$RESP" | tr -d '\000-\037' | jq -r '.ticket.number')
echo "Ticket ID: $TICKET_ID | Number: $TICKET_NUM"
Output: Ticket ID: 111423954 | Number: 32347
IDENTITY_PATH="D:/claudetools/.claude/identity.json"
REPO_ROOT=$(jq -r '.claudetools_root' "$IDENTITY_PATH")
API_KEY="T259810e5c9917386b-52c2aeea7cdb5ff41c6685a73cebbeb3"
BASE="https://computerguru.syncromsp.com/api/v1"
TICKET_ID=111423954
RESP=$(curl -s -X POST "${BASE}/tickets/${TICKET_ID}/comment?api_key=${API_KEY}" \
-H "Content-Type: application/json" \
--data-binary @- <<'JSON'
{
"subject": "Initial Issue",
"body": "LS-1 and LS-2 (Warren site) were enrolled in GuruRMM. Both machines have Sophos Endpoint Protection installed by the previous MSP via Sophos Central (previous MSP account — no admin access available). Tamper protection is enforced at the kernel level by SophosED.sys (Windows boot driver, Start type = 0), which prevents all standard removal methods.<br><br>LS-2 presented with: mouse clicks unresponsive after login until Ctrl+Alt+Del is pressed, and Start menu right-click not functioning. Root cause: Sophos shell extensions loading during heavy startup combined with Datto Cloud Continuity (/pop) triggering a UAC prompt on the secure desktop at logon.<br><br><strong>Work performed:</strong><br>- Enrolled both machines in GuruRMM (site: Warren / WARM-FALCON-5891)<br>- Removed Datto Cloud Continuity /pop startup registry entry (LS-2)<br>- Registered ScreenConnect and GuruRMM agent in SafeBoot\\Network on both machines<br>- Sophos removal attempted via multiple methods: SophosZap (blocked by tamper protection), SophosUninstall.exe (partially completed — most user-mode components removed from LS-2), PendingFileRenameOperations delete (failed — SophosED.sys loads as a boot driver before smss.exe processes the list), sc config disable (blocked by kernel registry callback), ACL reset (blocked by kernel-level protection)<br>- MCS Agent and MCS Client services disabled (prevents Central from re-enabling TP)<br>- SntpService (Network Threat Protection) registration removed<br>- Both machines booted to WinRE in preparation for offline driver removal<br><br><strong>Current state:</strong> SophosED.sys kernel boot driver remains active on both machines. Most user-mode Sophos components have been removed from LS-2. LS-1 removal not yet attempted.<br><br><strong>Next steps:</strong> Boot each machine to WinRE, open command prompt, delete SophosED.sys from the offline Windows partition, set SED service Start=4 in the offline SYSTEM registry hive, reboot to Windows, then run SophosZap --confirm to clean remaining registry entries. Scheduled for follow-up early next week.",
"hidden": false,
"do_not_email": true
}
JSON
)
COMMENT_ID=$(echo "$RESP" | tr -d '\000-\037' | jq -r '.comment.id')
echo "Comment ID: $COMMENT_ID"
Output: Comment ID: 414368535
$dlDir = "D:\Downloads\RecoveryUSB"
# Remove orphaned curl partial (frees 852MB)
Remove-Item "$dlDir\MediCat.USB.v21.12.7z" -EA SilentlyContinue
Write-Host "Removed orphaned curl partial."
# Find actual aria2 download location
$actualPath = Get-ChildItem "$dlDir\medi-cat-usb-v-21.12" -Filter "*.7z" -Recurse | Select-Object -First 1
Write-Host "aria2 download path: $($actualPath.FullName)"
$gb = [math]::Round($actualPath.Length/1GB,2)
Write-Host "Current size: ${gb}GB / 22GB"
Output: Removed orphaned curl partial. aria2 download path: D:\Downloads\RecoveryUSB\medi-cat-usb-v-21.12\MediCat USB v21.12\MediCat.USB.v21.12.7z Current size: 21.42GB / 22GB
# Clean up the curl orphan file
$curlFile = "D:\Downloads\RecoveryUSB\MediCat.USB.v21.12.7z"
Remove-Item $curlFile -EA SilentlyContinue
Write-Host "Curl orphan removed (freed 2GB)."
# Check aria2 speed now that it has the pipe to itself
Start-Sleep 20
$ariaLog = "D:\Downloads\RecoveryUSB\aria2.log"
$last = Get-Content $ariaLog -Tail 5 | Where-Object { $_ -match '^\[#' } | Select-Object -Last 1
Write-Host "aria2 now: $last"
Output: Curl orphan removed (freed 2GB). aria2 now: [#c1f67b 15GiB/22GiB(66%) CN:16 SD:0 DL:4.5MiB ETA:28m27s]
$dlDir = "D:\Downloads\RecoveryUSB"
# Delete the duplicate (keep the one without nested subdirs)
Remove-Item "$dlDir\medi-cat-usb-v-21.12" -Recurse -Force -EA SilentlyContinue
Write-Host "[OK] Removed duplicate (freed 21.4GB)"
# Get hash of our file
Write-Host "Computing SHA256 of MediCat.USB.v21.12.7z (this takes ~1 min for 21GB)..."
$hash = (Get-FileHash "$dlDir\MediCat.USB.v21.12.7z" -Algorithm SHA256).Hash
Write-Host "Our hash: $hash"
# Get the official hash from archive.org Hashes folder
Write-Host "`nFetching official hash..."
curl.exe -s -o "$dlDir\medicat-hashes.txt" "https://archive.org/download/medi-cat-usb-v-21.12/MediCat%20USB%20v21.12/Hashes/SHA256.txt"
if (Test-Path "$dlDir\medicat-hashes.txt") {
$hashContent = Get-Content "$dlDir\medicat-hashes.txt"
Write-Host "Hash file contents:"
$hashContent
}
Output: [OK] Removed duplicate (freed 21.4GB) Computing SHA256 of MediCat.USB.v21.12.7z (this takes ~1 min for 21GB)... Get-FileHash : The file 'D:\Downloads\RecoveryUSB\MediCat.USB.v21.12.7z' cannot be read: The process cannot access the file 'D:\Downloads\RecoveryUSB\MediCat.USB.v21.12.7z' because it is b ... [truncated]
$7z = "C:\Program Files\7-Zip\7z.exe"
$mediCat = "D:\Downloads\RecoveryUSB\medicat-copy.7z"
Write-Host "Backing up our scripts first..."
$backup = "D:\Downloads\RecoveryUSB\usb-data-backup"
if (Test-Path "E:\claudetools-data") {
Copy-Item "E:\claudetools-data" $backup -Recurse -Force
Write-Host "[OK] Backed up E:\claudetools-data to $backup"
}
# Free space check
$free = [math]::Round((Get-WmiObject Win32_LogicalDisk -Filter "DeviceID='E:'").FreeSpace/1GB,1)
Write-Host "E: free: ${free}GB (need ~28GB)"
if ($free -lt 30) {
Write-Host "[WARN] Not enough free space - removing systemrescue.iso (was Ventoy backup, MediCat includes SystemRescue)"
Remove-Item "E:\systemrescue.iso" -EA SilentlyContinue
$free = [math]::Round((Get-WmiObject Win32_LogicalDisk -Filter "DeviceID='E:'").FreeSpace/1GB,1)
Write-Host "E: free now: ${free}GB"
}
Write-Host ""
Write-Host "Extracting MediCat to E:\ (~28GB, several minutes)..."
$startTime = Get-Date
& $7z x $mediCat "-oE:\" -y -bsp1 -bse1 -bso0 2>&1 | Select-Object -Last 5
$elapsed = [math]::Round(((Get-Date)-$startTime).TotalSeconds)
Write-Host "Extract time: ${elapsed}s"
# Restore our scripts
Write-Host ""
Write-Host "Restoring claudetools-data..."
if (Test-Path $backup) {
Copy-Item $backup "E:\claudetools-data" -Recurse -Force
Write-Host "[OK] claudetools-data restored"
}
# Show final E: contents
Write-Host ""
Write-Host "E: USB final structure:"
Get-ChildItem E:\ | Select-Object Name, @{n='Type';e={if($_.PSIsContainer){'DIR'}else{'FILE'}}}, @{n='Size';e={if($_.PSIsContainer){''}else{"$([math]::Round($_.Length/1MB))MB"}}} | Format-Table -AutoSize
Output: Remove-Item on system path '"E:\systemrescue.iso"' is blocked. This path is protected from removal.
$7z = "C:\Program Files\7-Zip\7z.exe"
$mediCat = "D:\Downloads\RecoveryUSB\medicat-copy.7z"
# Backup our scripts first
$backup = "D:\Downloads\RecoveryUSB\usb-data-backup"
if (Test-Path "E:\claudetools-data") {
Remove-Item $backup -Recurse -Force -EA SilentlyContinue
Copy-Item "E:\claudetools-data" $backup -Recurse -Force
Write-Host "[OK] Backed up scripts to $backup"
}
# Verify space (should be plenty)
$free = [math]::Round((Get-WmiObject Win32_LogicalDisk -Filter "DeviceID='E:'").FreeSpace/1GB,1)
Write-Host "E: free: ${free}GB | Need: ~28GB"
Write-Host ""
Write-Host "Extracting MediCat to E:\..."
$startTime = Get-Date
& $7z x $mediCat "-oE:\" -y -bd 2>&1 | Select-Object -Last 8
$elapsed = [math]::Round(((Get-Date)-$startTime).TotalSeconds)
Write-Host "Extract time: ${elapsed}s ($([math]::Round($elapsed/60,1))min)"
# Restore scripts
if (Test-Path $backup) {
Copy-Item $backup "E:\claudetools-data" -Recurse -Force
Write-Host "[OK] Restored claudetools-data"
}
# Show final structure
Write-Host ""
Write-Host "E: USB root structure:"
Get-ChildItem E:\ | Sort-Object Name | Select-Object Name, @{n='Type';e={if($_.PSIsContainer){'DIR'}else{'FILE'}}}, @{n='Size';e={if($_.PSIsContainer){''}else{"$([math]::Round($_.Length/1MB))MB"}}} | Format-Table -AutoSize
Output: Command running in background with ID: b4y2ztffu. Output is being written to: C:\Users\guru\AppData\Local\Temp\claude\D--claudetools\5b023e80-29e9-4b73-adc1-a36bc6c46dfd\tasks\b4y2ztffu.output. You will be notified when it completes. To check interim output, use Read on that file path.
curl -s http://172.16.3.30:8001/api/coord/messages?unread_only=true | python -c "
import sys,json
m = json.load(sys.stdin)
for msg in (m if isinstance(m,list) else m.get('messages',[])):
if 'Server rebuild' in (msg.get('subject') or ''):
print('Marking msg', msg['id'], 'read')
import urllib.request
urllib.request.urlopen(urllib.request.Request(
f'http://172.16.3.30:8001/api/coord/messages/{msg[\"id\"]}/read',
method='PUT'
))
break
" 2>/dev/null
echo "[OK] coord msg marked read"
Output: Marking msg 88c733a8-d2f0-4c30-8dd8-e88b59caa11f read
[OK] coord msg marked read
# Clean up the redundant nested backup
Remove-Item "E:\claudetools-data\usb-data-backup" -Recurse -Force -EA SilentlyContinue
Write-Host "[OK] Cleaned up nested backup folder"
# Final clean listing
Write-Host "`nFinal claudetools-data:"
Get-ChildItem "E:\claudetools-data" -Recurse | Where-Object { -not $_.PSIsContainer } | Select-Object FullName
Write-Host "`nFinal E: usage:"
$drv = Get-WmiObject Win32_LogicalDisk -Filter "DeviceID='E:'"
Write-Host " Used: $([math]::Round(($drv.Size-$drv.FreeSpace)/1GB,1))GB / $([math]::Round($drv.Size/1GB,1))GB"
Output: [OK] Cleaned up nested backup folder
Final claudetools-data:
Final E: usage: Used: 31GB / 57.7GB FullName
E:\claudetools-data\README.txt
E:\claudetools-data\README-WINPE.txt ... [truncated]
Pending / Incomplete Tasks
- Rebuild and restart the GuruRMM server to apply the discovery fixes.
- Confirm the server rebuild is completed and the discovery fixes are in place.
- Proceed with the Sophos removal task using the prepared USB stick.
- Monitor the server for any issues after the rebuild.
Reference Information
Machine-extracted verbatim from the whole transcript via regex. Treat as leads, not gospel; deduped.
- URLs: https://rmm.azcomputerguru.com/install/WARM-FALCON-5891/windows, http://172.16.3.30:8001/api/coord/status, https://rmm.azcomputerguru.com/health, https://rmm.azcomputerguru.com/api/sites?page=1&per_page=5, https://rmm.azcomputerguru.com/api/enroll/WARM-FAL, http://172.16.3.20:3000/api/v1/repos/azcomputerguru/gururmm/contents/src, https://git.azcomputerguru.com/api/swagger, https://git.azcomputerguru.com, http://172.16.3.20:3000/api/v1/repos/azcomputerguru/gururmm/git/trees/main?recursive=false, http://172.16.3.20:3000/api/v1/repos/azcomputerguru/gururmm/contents/, http://172.16.3.20:3000/api/v1/repos/azcomputerguru/gururmm/contents/server/src, http://172.16.3.20:3000/api/v1/repos/azcomputerguru/gururmm/contents/server/src/api, http://172.16.3.20:3000/api/v1/repos/azcomputerguru/gururmm/raw/server/src/api/install.rs, http://172.16.3.20:3000/api/v1/repos/azcomputerguru/gururmm/raw/server/src/main.rs, https://rmm.azcomputerguru.com, https://mariadb.com/kb/en/library/systemd/, http://172.16.3.20:3000/api/v1/repos/azcomputerguru/gururmm/commits?path=server/src/api/install.rs&limit=5, https://rmm.azcomputerguru.com/install/DARK-GROVE-7839/windows, http://localhost:3001/install/DARK-GROVE-7839/windows, http://127.0.0.1:8001;, http://127.0.0.1:3001;, https://rmm.azcomputerguru.com/install/WARM-FAL, http://127.0.0.1:3001`, http://172.16.3.20:3000/api/v1/repos/azcomputerguru/gururmm/r, http://172.16.3.20:3000/api/v1/repos/azcomputerguru/gururmm/raw/server/src/mai, http://172.16.3.20:3000/api/v1/repos/azcomputerguru/gururmm/raw/server/src/api/mod.rs, http://172.16.3.20:3000/api/v1/repos/azcomputerguru/gururmm/raw/server/src/api/commands.rs, https://rmm-api.azcomputerguru.com, http://172.16.3.30:3001, http://172.16.3.30:3001/api/auth/login, http://172.16.3.30:3001/api/commands/46a96b12-bdc5-4227-9c06-f7fce9185e30, http://172.16.3.30:3001/api/commands/4db8cba8-14bd-4d83-9000-da883b67c843, http://172.16.3.30:3001/api/commands/53e88680-beaa-490a-832a-39b00db74841, http://localhost:11434, http://100.101.122.4:11434, http://172.16.3.20:3000/api/v1/repos/azcomputerguru/gururmm/contents/agent/src, http://172.16.3.20:3000/api/v1/repos/azcomputerguru/gururmm/raw/agent/src/service.rs, http://172.16.3.20:3000/api/v1/repos/azcomputerguru/gururmm/contents/installer, http://172.16.3.20:3000/api/v1/repos/azcomputerguru/gururmm/raw/installer/gururmm-agent.wxs, http://172.16.3.20:3000/azcomputerguru/gururmm.git
- IPs:
172.16.3.30,172.16.3.20,127.0.0.1,0.0.0.0,100.101.122.4,204.62.247.81,6.5.60.172,1.69.17.2 - Ticket numbers: #32347