cascades 2.4 runbook: exclude Floors 5 & 6 per Howard; Floor 4 power-down done

This commit is contained in:
2026-06-16 21:05:27 -07:00
parent 7f80febecd
commit bcebae439a

View File

@@ -38,12 +38,11 @@ Smaller 2.4 cells = less mutual interference, **no coverage loss, no radios turn
DRY-RUN first (omit `--apply`), eyeball, then `--apply`.
```
# clean floors (no mesh parent) — safe to do by zone:
# SCOPE (Howard 2026-06-16): Floors 5 & 6 are EXCLUDED — leave alone (do not power-down or disable).
# Floor 4 already powered-down (pilot). Remaining clean floors (no mesh parent) — safe to do by zone:
bash .claude/skills/unifi-wifi/scripts/apply-radio.sh cascades ng power low --zone "Floor 1" --apply
bash .claude/skills/unifi-wifi/scripts/apply-radio.sh cascades ng power low --zone "Floor 3" --apply
bash .claude/skills/unifi-wifi/scripts/apply-radio.sh cascades ng power low --zone "Floor 4" --apply
bash .claude/skills/unifi-wifi/scripts/apply-radio.sh cascades ng power low --zone "Floor 5" --apply
bash .claude/skills/unifi-wifi/scripts/apply-radio.sh cascades ng power low --zone "Floor 6" --apply
# (Floor 4 = DONE; Floors 5 & 6 = SKIP per scope.)
# Floor 1 caveat: this re-enables the deliberately-disabled 128 (sets it Low). Re-disable it after:
bash .claude/skills/unifi-wifi/scripts/apply-radio.sh cascades ng disable --ap "128" --apply
```
@@ -98,7 +97,8 @@ in a covered area; no user complaints. If a dead spot appears → re-enable that
## NOT doing tonight (explicit — so nothing is ambiguous)
- **Power-DOWN instead of disable** (redundant but high-client, keep serving): `3rd Floor Atrium, 318, 303,
4th Floor Atrium, 406-408, 505, Dining Room` — already set Low in Phase 1; leave ON.
4th Floor Atrium, 406-408, Dining Room` — already set Low in Phase 1; leave ON. (505 was here but
Floor 5 is now EXCLUDED — Howard 2026-06-16 — so 505/517 and Floor 6's 615/608/622 are left fully alone.)
- **HOLD (leave fully on):** `Memcare TV room` (memory-care area); all **MESH-PROTECTED** APs.
- **Companion 2.4 levers deferred to a later night** (isolate cause/effect): min-data-rate raise
(1→12 Mbps), band-steering (`apply-wlan bandsteer`), 2.4 min-RSSI on the 6 OFF APs